Pitney Bowes J693 manual Resetting the Printer, Level 1 Reset

Turn ‘Off’ the printer.

Press and hold the PAUSE, FEED, and CANCEL keys while turning ‘On’ the printer; continue to depress the keys until the ‘SYSTEM RESET’ message flashes.

Press and hold the PAUSE and CANCEL keys while turning ‘On’ the printer; continue to depress the keys until the ‘SYSTEM RESET’ message flashes.

Turn ‘Off’ the printer.

4.0.6Resetting the Printer

Depending upon the method used, there are three reset levels possible:

4.0.6.1Soft Reset

nTo reset the printer and clear any temporary host settings:

With the printer ‘On’, press and hold the CANCEL key for approximately four seconds.

4.0.6.2	Level 1 Reset
To

nreturn the printer to the factory default settings:

	Note: This reset can also be executed using the menu system: System
	Settings/Set Factory Defaults. See Section 4.1 for a listing of the
To	factory default settings.
	Level 2 Reset
4.0.6.3

return the printer to the factory default settings, and clear all the calibration na d adjustment parameters:

Note: After executing a Level 2 Reset, both Ribbon and Media Calibrations must be performed; see Sections 5.1 and 5.2. See Section 4.1 for a listing of the factory default settings.

J693 17