Datamax SV-3210, SV-3306, ST-3210, ST-3306 manual Mechanical

Page 55

Mechanical

Width:
ST/SV-3210	8.14 inches (20.7 cm)
ST/SV-3306	8.05 inches (20.4 cm)
Depth:
ST/SV-3210	14 inches (35.6 cm)
ST/SV-3306	7.65 inches (19.4 cm)
Height:
ST/SV-3210	10.5 inches (26.7 cm)
ST/SV-3306	10.5 inches (26.7 cm)
Weight:
ST Models	22 pounds (10 kg)
SV Models	18.8 pounds (8.46 kg)
Top Plate:	9.71 inches (24.7 cm) W X 8.60 inches (21.8
SV Models only	cm) DP X .09 inch (2.27 mm) THK
Operating Temperature:	40° F to 100° F (4° C to 38° C)

Print Engine

Print Type:

Print Resolution:*

ST/SV-3210

ST/SV-3306

Nominal Printhead Dot Size: ST/SV-3210 ST/SV-3306

Maximum Print Width: ST/SV-3210 ST/SV-3306

Print Speed:**

ST/SV-3210

ST/SV-3306

Slew Speed:**

ST/SV-3210

ST/SV-3306

Back Speed:**

Print Length Range:

Ticket Sensing:

*Given in Dots Per Inch

**Given in Inches Per Second

Direct Thermal

203 DPI (8 dots/mm)

300 DPI (11.8 dots/mm)

.0043 inch X .0052 inch (.108 mm X .132 mm)

.0027 inch X .0043 inch (.069 mm X .110 mm)

3.15inches (80 mm)

3.20inches (81.3 mm)

3.5–10 IPS (89 – 254 mm per second)

3.5–6 IPS (89 – 152 mmps)

2.0− 10.0 IPS (51 − 254 mmps)

2.0– 6.0 IPS (51 – 152 mmps)

2.0 − 5.0 IPS (51 − 127 mmps)

12 inches (304.8 mm) at default settings.

Moveable sensor

ST/SV-3210 and ST/SV-3306

45

Image 55

Contents ST/SV 3210 & ST/SV Operator’s Manual Page Copyright Information Page Agency Compliance and Approvals Important Safety Instructions Contents Troubleshooting Warranty Information Glossary Index Page About the Printer Printer OverviewST Table Model Standard Features Optional Features ST/SV-3210 and ST/SV-3306 Unpacking the Printer Getting StartedAdditional Requirements InspectionAC Selection Switch Required Fuse Rating AC Voltage ConfigurationInterfacing the Printer Printer power and interface connections ST Models Loading Ticket StockPage SV Models Installing a Memory Module ST Models SV Models Using the Front PanelTicket Exit Two functions Three functionsResident Formats Configuration TicketTest Pattern Ticket Internal Test Ticket Warm Reset Resetting the PrinterFactory Default Reset TOF Sensor Adjustment Adjusting Maintaining the PrinterST Model TOF Sensor Adjustment SV Model TOF Sensor Adjustment Stock ID Selections Position Start of Print & Cut/Tear Adjustment Operational Database Modification Auto Bit word Parit Database Modification Example Printer will turn off the On-Line Indicator and printRecommended Cleaning Schedule Area Method Interval MaintenanceST Models Raise Cleaning the PrintheadCleaning the Platen Roller TOF Sensor Cleaning Ticket Detect Sensor Cleaning Exterior Surface Cleaning Interior CleaningTroubleshooting Tips TroubleshootingTry this solution… Reconfigure to match, see Section Not meet specifications see Section Try this solution… Hex Dump Mode ST/SV-3210 and ST/SV-3306 Specifications SpecificationsEnvironmental Mechanical Ticket Stock Requirements Manufacturer Material Comment Approved Ticket StocksST/SV-3210 and ST/SV-3306 Appendix a Ascii Control Code ChartAscii Control Code Chart Available Fonts and Barcodes Appendix BDPL Fonts DPL Font Samples ST/SV-3210 and ST/SV-3306 Font Number Font ID Font Size Box Size Dtpl FontsDtpl Font Samples Font Barcode Type Length Checksum Valid Characters DPL BarcodesDPL Bar Code Samples Bar Code I Codabar Bar Code K Plessey Barcode T Telepen Dtpl Barcodes Cable Listings Appendix CST/SV-3210 and ST/SV-3306 Top Plate Dimensions SV Model Mounting DimensionsAppendix D Side Dimensions Thermal Printhead, Belts, and Platen Roller PrinterGeneral Warranty Provisions Warranty Service ProceduresLimitation of Liability ST/SV-3210 and ST/SV-3306 Glossary ST/SV-3210 and ST/SV-3306 ST/SV-3210 and ST/SV-3306 ST/SV-3210 and ST/SV-3306 Index Ticket stock, 10 12, 21 23, 28, 29 38, 39, 46, 47, 69