Datamax ST-3210, SV-3306, ST-3306 Maintenance, Recommended Cleaning Schedule Area Method Interval

Page 41

4.4Maintenance

Routine maintenance will ensure the optimum performance of the printer. The following table outlines the recommended cleaning intervals, while the items listed below will help do the job safely and effectively:

∙ Isopropyl alcohol

Soft-bristle brush

∙ Cotton swabs

∙ Soapy water/mild detergent

∙ A clean, lint-free cloth

∙ Compressed air

For your continued safety and to avoid damage to the unit, always turn ‘Off’ and unplug the printer before servicing.

Isopropyl alcohol is a flammable liquid, always take the CAUTION proper precautions when using this solvent.

Recommended Cleaning Schedule

 

Area

Method

Interval

 

 

Printhead

A cotton swab dampened with isopropyl alcohol,

After each

 

 

wiped across the printhead until all build-up is

roll or box

 

 

removed. See Section 4.4.1.

of tickets.

 

 

 

 

 

 

Platen

A cotton swab dampened with isopropyl alcohol

After each

 

 

Roller

wiped across the platen roller. Rotate the roller by

roll or box

 

 

 

hand and repeat to clean entire surface. See

of tickets.

 

 

 

Section 4.4.2.

 

 

 

 

 

 

 

 

TOF Sensor

A brush or compressed air (and isopropyl alcohol,

Monthly

 

 

 

if necessary) to remove all dust build-up. See

or as

 

 

 

Section 4.4.3.

needed.

 

 

 

 

 

 

 

Ticket Detect

Compressed air to remove all dust build-up. See

As needed.

 

 

Sensor

Section 4.4.4.

 

 

 

 

 

 

 

 

Ticket Path

A brush or compressed air to remove all build-up

As needed.

 

 

 

along the paper path.

 

 

 

 

 

 

 

 

Interior

A brush or compressed air to remove all build-up

As needed.

 

 

(ST Models

in the ticket compartment. See Section 4.4.5.

 

 

 

only)

 

 

 

 

Exterior

A soft cloth dampened with a mild detergent to

As needed.

 

 

 

remove all build-up. See Section 4.4.6.

 

 

 

 

 

 

 

 

Cutter

A brush or compressed air to remove all build-up.

As needed.

 

 

(optional

 

 

 

 

equipment)

 

 

 

 

 

 

 

 

ST/SV-3210 and ST/SV-3306

31

Image 41
Contents ST/SV 3210 & ST/SV Operator’s Manual Page Copyright Information Page Agency Compliance and Approvals Important Safety Instructions Contents Troubleshooting Warranty Information Glossary Index Page ST Table Model Printer OverviewAbout the Printer Standard Features Optional Features ST/SV-3210 and ST/SV-3306 Unpacking the Printer Getting StartedAdditional Requirements InspectionAC Selection Switch Required Fuse Rating AC Voltage ConfigurationInterfacing the Printer Printer power and interface connections ST Models Loading Ticket StockPage SV Models Installing a Memory Module ST Models SV Models Using the Front PanelTicket Exit Two functions Three functionsResident Formats Configuration TicketTest Pattern Ticket Internal Test Ticket Factory Default Reset Resetting the PrinterWarm Reset TOF Sensor Adjustment Adjusting Maintaining the PrinterST Model TOF Sensor Adjustment SV Model TOF Sensor Adjustment Stock ID Selections Position Start of Print & Cut/Tear Adjustment Operational Database Modification Auto Bit word Parit Database Modification Example Printer will turn off the On-Line Indicator and printRecommended Cleaning Schedule Area Method Interval MaintenanceST Models Raise Cleaning the PrintheadCleaning the Platen Roller TOF Sensor Cleaning Ticket Detect Sensor Cleaning Exterior Surface Cleaning Interior CleaningTry this solution… TroubleshootingTroubleshooting Tips Reconfigure to match, see Section Not meet specifications see Section Try this solution… Hex Dump Mode ST/SV-3210 and ST/SV-3306 Specifications SpecificationsEnvironmental Mechanical Ticket Stock Requirements Manufacturer Material Comment Approved Ticket StocksST/SV-3210 and ST/SV-3306 Appendix a Ascii Control Code ChartAscii Control Code Chart DPL Fonts Appendix BAvailable Fonts and Barcodes DPL Font Samples ST/SV-3210 and ST/SV-3306 Font Number Font ID Font Size Box Size Dtpl FontsDtpl Font Samples Font Barcode Type Length Checksum Valid Characters DPL BarcodesDPL Bar Code Samples Bar Code I Codabar Bar Code K Plessey Barcode T Telepen Dtpl Barcodes Cable Listings Appendix CST/SV-3210 and ST/SV-3306 Appendix D SV Model Mounting DimensionsTop Plate Dimensions Side Dimensions Thermal Printhead, Belts, and Platen Roller PrinterGeneral Warranty Provisions Warranty Service ProceduresLimitation of Liability ST/SV-3210 and ST/SV-3306 Glossary ST/SV-3210 and ST/SV-3306 ST/SV-3210 and ST/SV-3306 ST/SV-3210 and ST/SV-3306 Index Ticket stock, 10 12, 21 23, 28, 29 38, 39, 46, 47, 69