PSC 8200, 8100 manual Press the push button for approximately 2 sec, Release when

PRESS	FUNCTION	COMMENT
DURATION
		Press the push button for approximately 2 sec-
Hold, then		onds, then release. Each time this is done, the
release when the	Increments tone	beeper will sound at one of three tones. Stop
beeper sounds		when the desired tone (high, medium or low)
		is sounded.
		This mode allows system support personnel to
	Scanner Diagnostics	troubleshoot problems with the scanner. Press
4 Seconds		the button for eight seconds or cycle power to
	Modea
		exit Scanner Diagnostics Mode and reset the
		scanner.
8 Seconds	Resets Scannerb	Only system support personnel should per-
		form a reset.

a.By standard default, this function is normally disabled to prevent accidental activation by users.

b.Users should not perform scanner resets except under the direction of trained sys- tems support personnel.

Productivity Index Reporting Option —Your 8200 scanner may be equipped with the optional Productivity Index Reporting™ feature. This feature allows for data collection on the readability index of bar codes scanned by the scanner. This data may be transmitted to the POS Terminal where it may be easily sorted for action by the MIS department to improve bar code quality at the front end.

For additional information on how to enable Productivity Index Reporting in your scanner, please refer to the Product Reference Guide (PRG).

Quick Reference Guide 5