1. Introduction and Installation
LMake sure the blue gear (2) and white gear (3) are installed as shown.
3 |
2
5Turn the blue gear (4) in the direction of the arrow until the ink film is tight (5) and at least one layer of ink film is wrapped around the blue core (6).
4
5
Correct
1 turn
Tight
6
Incorrect
No ink film is wrapped around the blue core.
Slack/CreaseReverse
6Close the back cover securely by pushing down on the dotted area at both ends (7).
7
7Close the front cover securely.
For assistance, please visit http://www.panasonic.com/consumersupport | 9 |