Panasonic WV-CU650 operating instructions All Reset, PS·Data Communication Setting, Operation

Page 20

■All Reset

When the all reset mode is activated, all of the following set- tings will be reset to the factory default.

•Administrator password

•PS·Data communication setting

•LCD brightness, contrast, alarm buzzer, and button buzzer settings

•Button functions and joystick button functions (F1 to F8, A, B, and top buttons)

•Controller functions

(Time & Date Type)

(Auto Login)

(Operator Setup)

(Function Level)

(Camera Level)

(Cam Posi Map)

(Cam-Unit Map)

(HDD-Unit Map)

(LCD Title)

Note: Calibration settings of panning, tilting, and zooming will be maintained even after all reset.

●Operation

1.Turn off the power.

Note: If you set the MODE Switch #1 to #4 to ON, you can skip entering the administrator password in Step 3.

2.Turn on the power while holding down the buttons 2, 4, and 6.

“Admin Password” will appear on the LCD to enter the password.

All Reset

Admin Password _____

3.Enter the administrator password.

The password entered will be displayed as “∗” marks.

All Reset

Admin Password ∗ ∗ ∗ ∗ ∗

Notes:

•The factory default is “650”.

•To delete a character, press the CLEAR button.

•If you have entered a wrong password, the LCD display will return to Step 2.

4.Press the CAM (SET) button.

If the password entered is correct, all the settings will be reset to the factory default.

All Reset

5.Check “End” on the LCD.

Check “End” has appeared on the LCD to inform you of the initialization end.

All Reset

End

6. Turn off the power.

■PS·Data Communication Setting

This setting is required to establish a connection between the system units and system controller.

List of PS·Data communication settings

Setting Item Available setting parameter(s)

Baud Rate	4800 / 9600 / 19200 bps
Data Bit	8 bit (Fixed)
Parity Bit	None / Odd / Even
Stop Bit	1 / 2 bit
Wait Time	OFF / 100 msec / 200 msec /
	400 msec / 1000 msec

Group Adr	A to Z
Xon/Xoff	Not Use (Fixed)

Note: Factory defaults are underlined.

●Operation

1.Turn off the power.

2.Turn on the power while holding down the button 6 and MON (ESC) button.

“Admin Password” will appear on the LCD to enter the password.

PS • Data Com. Setup

Admin Password _____

20

Image 20

Contents Operating Instructions English Version Important Safety Instructions Contents Features PrefacePrecautions Limitation of LiabilityDo not drop metallic parts through slots Do not attempt to disassemble the applianceDocument Convention Notification about System UnitsMain Unit Front View0Alarm recall button ALM Recall Camera function/System function button1On-screen display button OSD 2Monitor lock/Logout button MON LOCK/LOGOUT#3Preset/Program preset button PRESET/PGM #9Adjustment button Adjust@8Shuttle hold button Shuttle Hold @9History button HistoryRear View 3D Joystick Unit Mon02 Cam016 HD316 Default Status LCD Display After LoginLCD Display Descriptions Blinking Main Menu Menu FunctionsSub Menu Menu Functions Controller No.1 No Exist Error Messages Displayed on the LCDInvalid Mon02 Cam016 HD316 BusyInstallations and Connections Basic System ConnectionsAdjustment of 3D Joystick Connection with the 3D Joystick UnitSetup Procedures Hardware Setup ProceduresMode Switch Setting Controller NO. Switch SettingSetup Procedures Firmware Administrator Password EntrySetting Modes Setting Mode DescriptionOperation All ResetPS·Data Communication Setting Baud Rate Setting Wait Time Setting Parity Bit SettingStop Bit Setting Group Address Setting for System Controller Group Address Setting for System UnitsTo Change the Administrator Password Database Copy PS·Data Operator Password Check Data Base Rx Mode Completed Sum=1733PSD Password Check Admin Password PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗Before Operation Power-onPower-off LCD/BUZZER Adjustment Buzzer AlarmBasic Operation Flow LCD BrightOperation Start Login If You Have Forgotten the Login Password Operation Start Auto LoginPS Data Mode Auto Login Logout PS·Data Mode No UserRecorder Selection Unit SelectionSystem Unit Selection Monitor Selection Camera SelectionSystem Unit Control Multiscreen DisplayElectronic Zooming Tour Sequence/Group SequenceSystem Function Control How to Display Search Lists Recorder ControlManual Recording Search PlaybackSearch Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2 Example of searching filter display and settingsOperation WJ-HD300 Series Available buttons and functionsSearch Mode HD500 Edit Group Alm Copy Search Mode HD500 DriveOperation WJ-HD500 Series LCD displaySearch Mode HD200 Time & Date Search PlaybackOperation WJ-HD200 Series Mmm/DD/YYYY Hhmm Mar/16/2004 0132 PMOther Available Functions Camera Control Camera Panning/Tilting ControlZooming Control Lens Iris ControlCamera Function Control Preset Position ControlHome Position Control Camera Position Control Camera Selection RecallWiper Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316Operating Procedure Latch mode Operating Procedure Momentary modeDefroster Control Auxiliary ControlAlarm Control System Controller Behavior during the Alarm ModeAlarm Reset Alarm SuspensionAlarm Recall HD500 Edit Group Copy Operation WJ-HD100 Series Alarm Recall HD200 EditAlarm Recall HD100 Menu Function Descriptions Menu FlowRecorder Functions HDD Menu Function CategoriesCamera Functions CAM System Functions SYS ControllerJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off Rst To Assign Menu Functions to Joystick Function ButtonsTo Recall Button Functions and Joystick Button Functions Camera Function Assign a Code=Function Check Camera Setup 101 To Check Button Functions and Joystick Button FunctionsCamera Setup Auto ModeBW Mode Menu Function DetailsBW Mode 103 Off Auto1 Auto2 Patrol LearnPatrol Learn 104 Start Stop Patrol Learn Pre03 Start StopAuto Pan Setup and Activation Repeat Playback Setting WJ-HD300 Series OnlyRecorder Functions Disk Selection WJ-HD300 Series OnlySystem Setup System FunctionsFiltering ON/OFF WJ-HD300 Series Only Displaying Camera and Playback Image WJ-HD500 Series OnlyMux Still Enter F1 Button 304Mux Still 305 Input Still CH Time & Date Search Display Pattern Camera CleaningController Functions Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing System Function Joystick Button FunctionsCamera Function Auto Pan Camera SortCamera Sequence Patrol PlayIris Reset Home PositionAuto Focus Camera +1Recorded-image Copy WJ-HD500 Series Only CameraRepeat Playback WJ-HD300 Series Only Alarm Search WJ-HD200 Series / WJ-HD100 Series Multiscreen DisplayTroubleshooting Problem Check item and Remedy ReferenceProblem Check item and Remedy Reference Specifications Standard AccessoriesSystem Controller Data PortPage 2004