Panasonic WV-CU650 operating instructions LCD Title Editing

Page 68

6.Press the ENTER or CAM (SET) button again.

The specified recorder number and unit number will be set for the selected HDD-unit map.

“Memory” will appear on the LCD for a few seconds, and the LCD display will return to Step 1.

LCD Title F1-F4 410 F1 F2 F3 F4

When "F1 — F4" is selected

HDD-Unit Map

409

HDD06 Memory

To delete a HDD-unit map

1.Perform Step 1 and 2 in p. 67.

2.Press the CLEAR button.

“Clear OK?” will appear on the LCD.

HDD-Unit

Map

409

HDD06

 

Clear

OK?

 

Note: To cancel deleting the setting, press the EXIT or MON (ESC) button.

3.Press the ENTER or CAM (SET) button. The HDD-unit map will be deleted.

“Erased” will appear on the LCD for a few seconds, and the LCD display will return to Step 1.

HDD-Unit Map

409

HDD06 Erased

Note: After all the HDD-unit maps have been deleted, “HDD00” will appear for the camera channel area. “HDD-Unit Map Check” menu will appear on the LCD.

LCD Title F1-F4 410

F5 F6 F7 F8

When "F5 — F8" is selected

4.Select desired characters by performing either of the following.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

Notes:

•To move the cursor, rotate the shuttle ring (clock- wise or counterclockwise) or move the 3D joystick (to the right or left)

•To delete a character, press the CLEAR button.

•To display the next or previous character group, rotate the JogDial while holding down the SHIFT button.(For example, when the cursor is pointed on “C”, “a” can be displayed by rotating the JogDial clockwise while holding down the SHIFT button.)

•The following diagram describes the available char- acters.

Character group

Characters

Space

“”(Space) ■

Capital letters

ABCDEFGHIJKLMNOPQRSTUVWXYZ

Small letters

abcdefghijklmnopqrstuvwxyz

Numerics

0123456789

Symbols

!”#$%&’()∗+,–./:;<=>?[¥]^_{}→←@

5.Press the ENTER or CAM (SET) button. “Set OK?” will appear on the LCD.

●LCD Title Editing

You can edit button function titles displayed on the LCD.

If you set LCD titles related to the registered button func- tions, controllability will be improved.

1.Display “LCD Title” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

LCD Title

410

F1-F4

 

F5-F8

2.Select a desired title group (F1-F4 or F5-F8) by rotating the shuttle ring or moving the 3D joystick.

3.Press the ENTER or CAM (SET) button.

The title editing form will appear on the LCD.

LCD Title F1-F4 410

Set OK?

Note: To cancel the setting, press the EXIT or MON (ESC) button. The LCD display will return to Step 4.

6.Press the ENTER or CAM (SET) button again. The LCD title you have edited will be registered. “Memory” will appear on the LCD for a few seconds, and the LCD display will return to Step 1.

LCD Title F1-F4 410

Memory

68

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Operating Instructions English Version Important Safety Instructions Contents Features PrefacePrecautions Limitation of LiabilityDo not drop metallic parts through slots Do not attempt to disassemble the applianceDocument Convention Notification about System UnitsMain Unit Front View0Alarm recall button ALM Recall Camera function/System function button1On-screen display button OSD 2Monitor lock/Logout button MON LOCK/LOGOUT#3Preset/Program preset button PRESET/PGM #9Adjustment button Adjust@8Shuttle hold button Shuttle Hold @9History button HistoryRear View 3D Joystick Unit Mon02 Cam016 HD316 Default Status LCD Display After LoginLCD Display Descriptions Blinking Main Menu Menu FunctionsSub Menu Menu Functions Controller No.1 No Exist Error Messages Displayed on the LCDInvalid Mon02 Cam016 HD316 BusyInstallations and Connections Basic System ConnectionsAdjustment of 3D Joystick Connection with the 3D Joystick UnitSetup Procedures Hardware Setup ProceduresMode Switch Setting Controller NO. Switch SettingSetup Procedures Firmware Administrator Password EntrySetting Modes Setting Mode DescriptionOperation All ResetPS·Data Communication Setting Baud Rate Setting Wait Time Setting Parity Bit SettingStop Bit Setting Group Address Setting for System Controller Group Address Setting for System UnitsTo Change the Administrator Password Database Copy PS·Data Operator Password Check Data Base Rx Mode Completed Sum=1733PSD Password Check Admin Password PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗Before Operation Power-onPower-off LCD/BUZZER Adjustment Buzzer AlarmBasic Operation Flow LCD BrightOperation Start Login If You Have Forgotten the Login Password Operation Start Auto LoginPS Data Mode Auto Login Logout PS·Data Mode No UserRecorder Selection Unit SelectionSystem Unit Selection Monitor Selection Camera SelectionSystem Unit Control Multiscreen DisplayElectronic Zooming Tour Sequence/Group SequenceSystem Function Control How to Display Search Lists Recorder ControlManual Recording Search PlaybackSearch Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2 Example of searching filter display and settingsOperation WJ-HD300 Series Available buttons and functionsSearch Mode HD500 Edit Group Alm Copy Search Mode HD500 DriveOperation WJ-HD500 Series LCD displaySearch Mode HD200 Time & Date Search PlaybackOperation WJ-HD200 Series Mmm/DD/YYYY Hhmm Mar/16/2004 0132 PMOther Available Functions Camera Control Camera Panning/Tilting ControlZooming Control Lens Iris ControlCamera Function Control Preset Position ControlHome Position Control Camera Position Control Camera Selection RecallWiper Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316Operating Procedure Latch mode Operating Procedure Momentary modeDefroster Control Auxiliary ControlAlarm Control System Controller Behavior during the Alarm ModeAlarm Reset Alarm SuspensionAlarm Recall HD500 Edit Group Copy Operation WJ-HD100 Series Alarm Recall HD200 EditAlarm Recall HD100 Menu Function Descriptions Menu FlowRecorder Functions HDD Menu Function CategoriesCamera Functions CAM System Functions SYS ControllerJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off Rst To Assign Menu Functions to Joystick Function ButtonsTo Recall Button Functions and Joystick Button Functions Camera Function Assign a Code=Function Check Camera Setup 101 To Check Button Functions and Joystick Button FunctionsCamera Setup Auto ModeBW Mode Menu Function DetailsBW Mode 103 Off Auto1 Auto2 Patrol LearnPatrol Learn 104 Start Stop Patrol Learn Pre03 Start StopAuto Pan Setup and Activation Repeat Playback Setting WJ-HD300 Series OnlyRecorder Functions Disk Selection WJ-HD300 Series OnlySystem Setup System FunctionsFiltering ON/OFF WJ-HD300 Series Only Displaying Camera and Playback Image WJ-HD500 Series OnlyMux Still Enter F1 Button 304Mux Still 305 Input Still CH Time & Date Search Display Pattern Camera CleaningController Functions Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing System Function Joystick Button FunctionsCamera Function Auto Pan Camera SortCamera Sequence Patrol PlayIris Reset Home PositionAuto Focus Camera +1Recorded-image Copy WJ-HD500 Series Only CameraRepeat Playback WJ-HD300 Series Only Alarm Search WJ-HD200 Series / WJ-HD100 Series Multiscreen DisplayTroubleshooting Problem Check item and Remedy ReferenceProblem Check item and Remedy Reference Specifications Standard AccessoriesSystem Controller Data PortPage 2004
Top Page Image Contents