●Button Buzzer Setting
You will perform the setting whether to activate a sound when a button is pressed. Select the desired parameter by rotating the JogDial.
Buzzer Operation ON
Notes:
•OFF or ON is selectable. The factory default is ON.
•If set to ON, short buzzer will sound three times in the following occasions.
(p. 15) Invalid, Prohibited (p. 62) Level 1 Fixed
User ID | __650 |
Notes:
•To delete a character, press the CLEAR button.
•You can also enter your user ID without pressing the CAM (SET) button.
5.Press the CAM (SET) button. When the ID number is correct, “Password” entry form appears on the LCD.
User ID | 650 |
Password | _____ |
6.Enter the password by pressing the numeric buttons. Then, press the CAM (SET) button.
■Operation Start (Login)
Before starting operation, user authentication by the ID and password is required. (Refer to p. 62 for details on the set- ting of ID and password.)
Notes:
•User authentication is skipped when the auto login is set to ON. (Refer to p. 30.)
•The factory default of operator information is as follows.
•If no operation has been performed for 5 seconds or more, the LCD display will return to the login standby display.
User ID | 650 |
Password | __∗ ∗ ∗ |
Notes:
•To delete a character, press the CLEAR button.
•The password will be displayed as ∗ marks.
7.When the password is correct, “Login OK” appears on the LCD. Then, the LCD changes to the operation dis- play.
Operator No. | User ID | Password | Function level | Camera level |
1 | 650 | 650 | 1 | 1 |
|
|
|
|
|
2 | 1 | 12345 | 1 | 1 |
|
|
|
|
|
3 | 100 | 100 | 2 | 1 |
|
|
|
|
|
4 | 101 | 101 | 3 | 1 |
|
|
|
|
|
5 | 102 | 102 | 3 | 1 |
|
|
|
|
|
6 | 103 | 103 | 3 | 1 |
|
|
|
|
|
1.Turn on the power. (Refer to p. 27
2.Wait until the login standby display appears.
PS·Data Mode
No User
3.Press the CAM (SET) button. “User ID” entry form will appear on the LCD.
| Login | OK |
| |
|
|
|
| |
|
|
|
|
|
Mon04 | Cam128 |
| Unit16 | |
F1 | F2 | F3 | F4 | |
Mon04 Cam128 HD316
F1 F2 F3 F4
Notes:
•The smallest monitor, camera, and unit numbers are displayed on the LCD.
•Three seconds after the unit number was deter- mined, model number appears in place of unit num- ber.
•When the ID or password is wrong, “Invalid” blinks on the LCD. Then, the LCD returns to the login standby display.
User ID | _____ |
Invalid
4. Enter the ID number by pressing the numeric buttons. The user ID entered will appear on the LCD.
PS • Data | Mode |
No User | 29 |