■Preset Position Control
Preset position is the function to register camera monitoring positions (preset positions) associated with position num- bers. By entering the position numbers, you can move cam- eras to the preset positions.
Note: To activate this function, you need to register the pre- set positions of combination camera.
1.Select a system unit, monitor, and desired camera. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.)
2.Enter a preset position number by pressing the numeric buttons. The entered number will appear on the LCD.
Mon02 | Cam001 |
| ____3 |
F1 | F2 | F3 | F4 |
3.Press the PRESET/PGM PRESET button.
The camera will move to the registered preset position, and the preset position image will be displayed on an active monitor.
Mon02 Cam001 Pre03
F1 | F2 | F3 | F4 |
To register preset positions
1.Move the camera to a desired position by moving the 3D joystick.
2.Enter a preset position number you wish to register by pressing the numeric buttons.
The entered number will appear on the LCD.
Mon01 Cam001 ___12
F1 | F2 | F3 | F4 |
3.Press the PRESET/PGM PRESET button while holding down the SHIFT button.
The preset position will be registered, and “Memory” will appear on the LCD.
Mon01 Cam001 Pre12
Memory
Note: If the registration have failed, “Invalid” will appear on the LCD. (Example: When the selected camera does not support preset position control)
Mon01 Cam001 Pre12
Invalid
■Home Position Control
Home position is the default preset position. You can move the camera to the home position only by pressing the PRE- SET/PGM PRESET button.
Note: To activate this function, you need to register the home position of combination camera. (Refer to the operating instructions of combination camera.)
1.Select a system unit, monitor, and desired camera. (Refer to p. 31 System Unit Selection, p. 32 Monitor Selection, and p. 32 Camera Selection.)
2.Press the PRESET/PGM PRESET button. The camera will move to the registered home position, and the home position image will be displayed on an active monitor.
Note: You can also move the camera to the home posi- tion by pressing the button 0, and then the PRE- SET/PGM PRESET button.
■Camera Function Control
You can recall the camera functions of combination cam- eras by entering the function number from this system con- troller. Refer to the operating instructions of combination camera for the association of camera numbers and func- tions.
1.Select a desired combination camera. (Refer to p. 32 Camera Selection.)
2.Enter a camera function number by pressing the numeric buttons. The entered number will appear on the LCD.
Mon01 Cam001 ____3
F1 F2 F3 F4
3.Press the CAM FUNC/SYS FUNC button.
The associated camera function will be activated.
Note: If you assign camera functions to the joystick function buttons (A, B, and top buttons), you can recall the cam- era functions by pressing these buttons. Refer to p. 47 MENU FUNCTION DESCRIPTIONS for details.
41