
UNIT SELECTION
To control the system, you need to select a desired unit (system unit, recorder, monitor, or camera) at the begin- ning.
■System Unit Selection
Notes:
•In advance, you need to set the unit number for each system unit. (Refer to the operating instructions of sys- tem units.)
•1 to 99 are available for the unit number.
1.Enter a unit number by pressing the numeric buttons. The entered number will appear on the LCD.
Mon01 Cam016 ___16
F1 | F2 | F3 | F4 |
2.Press the RECORDER/UNIT button while holding down the SHIFT button. The system will become ready for control. Then, the monitor number, camera number, and system unit number will appear on the LCD.
Mon02 Cam016 Unit16
F1 | F2 | F3 | F4 |
Notes:
•Three seconds after, model number will appear in place of unit number. To display the unit number again, hold down the RECORDER/UNIT.
Mon02 Cam016 HD316
F1 | F2 | F3 | F4 |
•If you have entered a wrong unit number, “Invalid” will appear on the LCD. Then, the LCD will return to the status before the system unit selection.
Invalid
■Recorder Selection
Notes:
•In advance, you need to set
•In the factory default, Recorder 1 to 16 is associated with Unit 1 to 16.
1.Enter a recorder number by pressing numeric buttons. The entered number will appear on the LCD.
Mon02 Cam128 ____2
F1 F2 F3 F4
2.Press the RECORDER/UNIT button. The system will become ready for control, and the monitor number, camera number, and system unit number will appear on the LCD.
Mon02 Cam016 Unit16
F1 F2 F3 F4
Notes:
•Three seconds after, model number will appear in place of unit number.
Mon02 Cam016 HD316
F1 | F2 | F3 | F4 |
•If you have entered a wrong recorder number, “Invalid” will appear on the LCD. Then, the LCD will return to the status before the recording selection.
Invalid
31