Panasonic WV-CU650 System Functions, Filtering ON/OFF WJ-HD300 Series Only, System Setup

Page 58

●Filtering ON/OFF (WJ-HD300 Series Only)

During the filtering playback, the searching filter will be temporarily canceled or recovered.

1.Display “HD300 Listed” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HD300	Listed		203
On	Off
F1	F2	F3	F4

Note: To cancel the numeric entry, press the CLEAR button.

3.Press the F1 button.

•Playback picture will be displayed on the multi- screen monitor.

•The specified camera channel will blink on the LCD for a few seconds, and the LCD display will return to Step 1.

HD500 V-Multi

204

Video CH=__5

2.Press the F2 button.

The searching filter will be canceled, and “s” mark will light up beside “Off”.

HD300	Listed		203
On	Off
F1	F2	F3	F4

Note: To recover the searching filter, press the F1 button. The searching filter will be recovered, and “s” mark will light up beside “On”.

●Displaying Camera and Playback Image (WJ-HD500 Series Only)

While camera images are being displayed in the multi- screen display, playback picture can be displayed on one of the multiscreen segments. (When the spot mode is acti- vated for the camera image on the monitor, playback pic- ture cannot be displayed.)

Note: Refer to the operating instructions of recorder for details on this function.

1.Display “HD500 V-Multi” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HD500 V-Multi

204

"Input Video CH"

Note: To quit the playback on the multiscreen monitor, press the STOP button.

■System Functions

●System Setup

You can display the setup menu of selected system unit on the active monitor.

Note: The details on the setup menu differ depending on system units. Refer to the operating instructions of sys- tem unit.

1.Display “System Setup” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

System	Setup		301
On	Off
F1	F2	F3	F4

2.Press the F1 button.

The setup menu of selected system unit will appear on the active monitor, and “s” mark will light up beside “On”.

System	Setup		301
On	Off
F1	F2	F3	F4

2.Enter the channel number of camera whose playback picture you wish to display.

The entered number will appear on the LCD.

HD500 V-Multi ____5

"Enter F1 Button"

3.Perform the camera setting while watching the setup menu on the monitor.

58

Image 58

Contents Operating Instructions English Version Important Safety Instructions Contents Features PrefaceDo not drop metallic parts through slots PrecautionsLimitation of Liability Do not attempt to disassemble the applianceDocument Convention Notification about System UnitsMain Unit Front View1On-screen display button OSD 0Alarm recall button ALM RecallCamera function/System function button 2Monitor lock/Logout button MON LOCK/LOGOUT@8Shuttle hold button Shuttle Hold #3Preset/Program preset button PRESET/PGM#9Adjustment button Adjust @9History button HistoryRear View 3D Joystick Unit LCD Display Descriptions Default Status LCD Display After LoginMon02 Cam016 HD316 Sub Menu Menu Functions Main Menu Menu FunctionsBlinking Invalid Controller No.1 No Exist ErrorMessages Displayed on the LCD Mon02 Cam016 HD316 BusyInstallations and Connections Basic System ConnectionsAdjustment of 3D Joystick Connection with the 3D Joystick UnitMode Switch Setting Setup Procedures HardwareSetup Procedures Controller NO. Switch SettingSetting Modes Setup Procedures FirmwareAdministrator Password Entry Setting Mode DescriptionPS·Data Communication Setting All ResetOperation Baud Rate Setting Stop Bit Setting Parity Bit SettingWait Time Setting Group Address Setting for System Controller Group Address Setting for System UnitsTo Change the Administrator Password Database Copy PSD Password Check Admin Password PS·Data Operator Password CheckData Base Rx Mode Completed Sum=1733 PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗Power-off Power-onBefore Operation Basic Operation Flow LCD/BUZZER AdjustmentBuzzer Alarm LCD BrightOperation Start Login PS Data Mode Auto Login If You Have Forgotten the Login PasswordOperation Start Auto Login Logout PS·Data Mode No UserSystem Unit Selection Unit SelectionRecorder Selection Monitor Selection Camera SelectionElectronic Zooming System Unit ControlMultiscreen Display Tour Sequence/Group SequenceSystem Function Control Manual Recording How to Display Search ListsRecorder Control Search PlaybackOperation WJ-HD300 Series Search Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2Example of searching filter display and settings Available buttons and functionsOperation WJ-HD500 Series Search Mode HD500 Edit Group Alm CopySearch Mode HD500 Drive LCD displayOperation WJ-HD200 Series Search Mode HD200Time & Date Search Playback Mmm/DD/YYYY Hhmm Mar/16/2004 0132 PMOther Available Functions Zooming Control Camera ControlCamera Panning/Tilting Control Lens Iris ControlHome Position Control Preset Position ControlCamera Function Control Wiper Control Camera Position ControlCamera Selection Recall Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316Defroster Control Operating Procedure Latch modeOperating Procedure Momentary mode Auxiliary ControlAlarm Reset Alarm ControlSystem Controller Behavior during the Alarm Mode Alarm SuspensionAlarm Recall HD500 Edit Group Copy Alarm Recall HD100 Alarm Recall HD200 EditOperation WJ-HD100 Series Menu Function Descriptions Menu FlowCamera Functions CAM Menu Function CategoriesRecorder Functions HDD System Functions SYS ControllerJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons To Recall Button Functions and Joystick Button Functions Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off RstTo Assign Menu Functions to Joystick Function Buttons Camera Function Assign a Code=Function Check Camera Setup 101 To Check Button Functions and Joystick Button FunctionsBW Mode Camera SetupAuto Mode Menu Function DetailsPatrol Learn 104 Start Stop BW Mode 103 Off Auto1 Auto2Patrol Learn Patrol Learn Pre03 Start StopRecorder Functions Auto Pan Setup and ActivationRepeat Playback Setting WJ-HD300 Series Only Disk Selection WJ-HD300 Series OnlyFiltering ON/OFF WJ-HD300 Series Only System SetupSystem Functions Displaying Camera and Playback Image WJ-HD500 Series OnlyMux Still 305 Input Still CH 304Mux Still Enter F1 Button Controller Functions Camera CleaningTime & Date Search Display Pattern Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing Camera Function Joystick Button FunctionsSystem Function Camera Sequence Auto PanCamera Sort Patrol PlayAuto Focus Iris ResetHome Position Camera +1Repeat Playback WJ-HD300 Series Only CameraRecorded-image Copy WJ-HD500 Series Only Alarm Search WJ-HD200 Series / WJ-HD100 Series Multiscreen DisplayTroubleshooting Problem Check item and Remedy ReferenceProblem Check item and Remedy Reference System Controller SpecificationsStandard Accessories Data PortPage 2004