Panasonic WV-CU650 operating instructions Camera, Repeat Playback WJ-HD300 Series Only

Page 72

Camera –1

You can change the camera image on the monitor to the lower channel.

1.Display “Camera –1” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

Camera

-1

 

511

“Enter

F1

Button”

F1

F2

F3

F4

2.Press the F1 button.

The image of lower camera channel will be displayed on the active monitor.

Note: When the Camera –1 function has been activated with the A button, the LCD display will become as follows.

Camera -1

A

A - B Repeat Playback (WJ-HD300 Series Only)

The description is the same as that of button function. Refer to p. 57 A – B Repeat Playback Setting.

Note: Refer to the operating instruction of recorder for details of this function.

1.Display “HD300 A – B Repeat” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HD300 A—B Repeat 512

“Enter F1 Button”

F1

F2

F3

F4

2.Press the F1 button at the point you wish to start play- back.

The playback start point (A) will be set, and “Start” will appear on the LCD for a few seconds.

HD300 A—B Repeat 512

Start

F1

F2

F3

F4

3.Press the F1 button again at the point you wish to end playback. The playback end point (B) will be set, and “End” will appear on the LCD for a few seconds. Then, the repeat playback will be performed between (A) and

(B).

HD300 A—B Repeat 512

End

F1

F2

F3

F4

Notes:

To quit the repeat playback, press the F1 button again. “Cancel” will appear on the LCD for a few seconds.

HD300 A—B Repeat 512

Cancel

When the A – B repeat playback function has been activated with the function button, the LCD display will become as follows.

HD300

A—B Repeat

A

Start

 

 

HD300 A—B Repeat

A

End

 

HD300 A—B Repeat

A

Cancel

 

Recorded-image Copy (WJ-HD500 Series Only)

You can copy recorded images from the built-in hard disk to an external recording device.

Note: Refer to the operating instruction of recorder for details of this function.

1.Display “HD500 Copy” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HD500

Copy

 

513

“Enter

F1

Button”

F1

F2

F3

F4

2.Press the F1 button.

The record copy function will be activated.

Note: When the record copy function has been acti- vated with the A button, the LCD display will become as follows.

72

Image 72
Contents Operating Instructions English Version Important Safety Instructions Contents Features PrefacePrecautions Limitation of LiabilityDo not drop metallic parts through slots Do not attempt to disassemble the applianceDocument Convention Notification about System UnitsMain Unit Front View0Alarm recall button ALM Recall Camera function/System function button1On-screen display button OSD 2Monitor lock/Logout button MON LOCK/LOGOUT#3Preset/Program preset button PRESET/PGM #9Adjustment button Adjust@8Shuttle hold button Shuttle Hold @9History button HistoryRear View 3D Joystick Unit Default Status LCD Display After Login LCD Display DescriptionsMon02 Cam016 HD316 Main Menu Menu Functions Sub Menu Menu FunctionsBlinking Controller No.1 No Exist Error Messages Displayed on the LCDInvalid Mon02 Cam016 HD316 BusyInstallations and Connections Basic System ConnectionsAdjustment of 3D Joystick Connection with the 3D Joystick UnitSetup Procedures Hardware Setup ProceduresMode Switch Setting Controller NO. Switch SettingSetup Procedures Firmware Administrator Password EntrySetting Modes Setting Mode DescriptionAll Reset PS·Data Communication SettingOperation Baud Rate Setting Parity Bit Setting Stop Bit SettingWait Time Setting Group Address Setting for System Controller Group Address Setting for System UnitsTo Change the Administrator Password Database Copy PS·Data Operator Password Check Data Base Rx Mode Completed Sum=1733PSD Password Check Admin Password PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗Power-on Power-offBefore Operation LCD/BUZZER Adjustment Buzzer AlarmBasic Operation Flow LCD BrightOperation Start Login If You Have Forgotten the Login Password Operation Start Auto LoginPS Data Mode Auto Login Logout PS·Data Mode No UserUnit Selection System Unit SelectionRecorder Selection Monitor Selection Camera SelectionSystem Unit Control Multiscreen DisplayElectronic Zooming Tour Sequence/Group SequenceSystem Function Control How to Display Search Lists Recorder ControlManual Recording Search PlaybackSearch Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2 Example of searching filter display and settingsOperation WJ-HD300 Series Available buttons and functionsSearch Mode HD500 Edit Group Alm Copy Search Mode HD500 DriveOperation WJ-HD500 Series LCD displaySearch Mode HD200 Time & Date Search PlaybackOperation WJ-HD200 Series Mmm/DD/YYYY Hhmm Mar/16/2004 0132 PMOther Available Functions Camera Control Camera Panning/Tilting ControlZooming Control Lens Iris ControlPreset Position Control Home Position ControlCamera Function Control Camera Position Control Camera Selection RecallWiper Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316Operating Procedure Latch mode Operating Procedure Momentary modeDefroster Control Auxiliary ControlAlarm Control System Controller Behavior during the Alarm ModeAlarm Reset Alarm SuspensionAlarm Recall HD500 Edit Group Copy Alarm Recall HD200 Edit Alarm Recall HD100Operation WJ-HD100 Series Menu Function Descriptions Menu FlowMenu Function Categories Camera Functions CAMRecorder Functions HDD System Functions SYS ControllerJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off Rst To Assign Menu Functions to Joystick Function ButtonsTo Recall Button Functions and Joystick Button Functions Camera Function Assign a Code=Function Check Camera Setup 101 To Check Button Functions and Joystick Button FunctionsCamera Setup Auto ModeBW Mode Menu Function DetailsBW Mode 103 Off Auto1 Auto2 Patrol LearnPatrol Learn 104 Start Stop Patrol Learn Pre03 Start StopAuto Pan Setup and Activation Repeat Playback Setting WJ-HD300 Series OnlyRecorder Functions Disk Selection WJ-HD300 Series OnlySystem Setup System FunctionsFiltering ON/OFF WJ-HD300 Series Only Displaying Camera and Playback Image WJ-HD500 Series Only304 Mux Still 305 Input Still CHMux Still Enter F1 Button Camera Cleaning Controller FunctionsTime & Date Search Display Pattern Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing Joystick Button Functions Camera FunctionSystem Function Auto Pan Camera SortCamera Sequence Patrol PlayIris Reset Home PositionAuto Focus Camera +1Camera Repeat Playback WJ-HD300 Series OnlyRecorded-image Copy WJ-HD500 Series Only Alarm Search WJ-HD200 Series / WJ-HD100 Series Multiscreen DisplayTroubleshooting Problem Check item and Remedy ReferenceProblem Check item and Remedy Reference Specifications Standard AccessoriesSystem Controller Data PortPage 2004