Panasonic WV-CU650 Messages Displayed on the LCD, Invalid, Mon02 Cam016 HD316 Busy

Page 15

Messages Displayed on the LCD

Invalid

Invalid

This message is displayed in the following circumstances.

When you have entered a wrong user ID or password, etc.

When you have a camera number or menu number, etc. that is not existing.

Busy

When a selected monitor is controlled by a higher-level user, the monitor number and “Busy” blinks on the LCD. (You cannot control the monitor.)

When a selected camera is controlled by a higher-level user, the camera number and “Busy” blinks on the LCD. (You cannot control the camera.)

To cancel the Busy status, select another monitor, or wait until “Busy” goes out.

Mon02 Cam016 HD316

Busy

"Busy" status is activated for a monitor.

Mon02 Cam016 HD316

Busy

"Busy" status is activated for a camera.

Prohibited

Mon02 Cam016 HD316

Prohibited

When you have tried an operation not authorized by the function level setting, camera level setting, or selected system unit, “Prohibited” blinks on the LCD.

When you have forgotten to select a system unit or monitor before selecting a camera, “Prohibited” blinks on the LCD.

When you have selected a system unit disconnected from the system, “Prohibited” blinks on the LCD.

After a few seconds, the LCD display will return to the default status.

Notes:

After a few seconds, this message will automatically disappear.

The illustration is an example in which a camera num- ber other than 1 to 256 has been entered.

In this document, gray area on illustration shows blink- ing.

Controller No.1 No Exist Error

Controller No.1

No Exist Error

This message is displayed when no system controller is set to CONTROLLER NO.1. Check that a system controller is set to CONTROLLER NO. 1 (Refer to p. 18 CONTROLLER NO. Switch Setting.)

15

Image 15
Contents Operating Instructions English Version Important Safety Instructions Contents Preface FeaturesDo not attempt to disassemble the appliance PrecautionsLimitation of Liability Do not drop metallic parts through slotsNotification about System Units Document ConventionFront View Main Unit2Monitor lock/Logout button MON LOCK/LOGOUT 0Alarm recall button ALM RecallCamera function/System function button 1On-screen display button OSD@9History button History #3Preset/Program preset button PRESET/PGM#9Adjustment button Adjust @8Shuttle hold button Shuttle HoldRear View 3D Joystick Unit Default Status LCD Display After Login LCD Display DescriptionsMon02 Cam016 HD316 Main Menu Menu Functions Sub Menu Menu FunctionsBlinking Mon02 Cam016 HD316 Busy Controller No.1 No Exist ErrorMessages Displayed on the LCD InvalidBasic System Connections Installations and ConnectionsConnection with the 3D Joystick Unit Adjustment of 3D JoystickController NO. Switch Setting Setup Procedures HardwareSetup Procedures Mode Switch SettingSetting Mode Description Setup Procedures FirmwareAdministrator Password Entry Setting ModesAll Reset PS·Data Communication SettingOperation Baud Rate Setting Parity Bit Setting Stop Bit SettingWait Time Setting Group Address Setting for System Units Group Address Setting for System ControllerTo Change the Administrator Password Database Copy PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗ PS·Data Operator Password CheckData Base Rx Mode Completed Sum=1733 PSD Password Check Admin PasswordPower-on Power-offBefore Operation LCD Bright LCD/BUZZER AdjustmentBuzzer Alarm Basic Operation FlowOperation Start Login Logout PS·Data Mode No User If You Have Forgotten the Login PasswordOperation Start Auto Login PS Data Mode Auto LoginUnit Selection System Unit SelectionRecorder Selection Camera Selection Monitor SelectionTour Sequence/Group Sequence System Unit ControlMultiscreen Display Electronic ZoomingSystem Function Control Search Playback How to Display Search ListsRecorder Control Manual RecordingAvailable buttons and functions Search Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2Example of searching filter display and settings Operation WJ-HD300 SeriesLCD display Search Mode HD500 Edit Group Alm CopySearch Mode HD500 Drive Operation WJ-HD500 SeriesMmm/DD/YYYY Hhmm Mar/16/2004 0132 PM Search Mode HD200Time & Date Search Playback Operation WJ-HD200 SeriesOther Available Functions Lens Iris Control Camera ControlCamera Panning/Tilting Control Zooming ControlPreset Position Control Home Position ControlCamera Function Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316 Camera Position ControlCamera Selection Recall Wiper ControlAuxiliary Control Operating Procedure Latch modeOperating Procedure Momentary mode Defroster ControlAlarm Suspension Alarm ControlSystem Controller Behavior during the Alarm Mode Alarm ResetAlarm Recall HD500 Edit Group Copy Alarm Recall HD200 Edit Alarm Recall HD100Operation WJ-HD100 Series Menu Flow Menu Function DescriptionsMenu Function Categories Camera Functions CAMRecorder Functions HDD Controller System Functions SYSJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Camera Function Assign a Code= Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off RstTo Assign Menu Functions to Joystick Function Buttons To Recall Button Functions and Joystick Button FunctionsTo Check Button Functions and Joystick Button Functions Function Check Camera Setup 101Menu Function Details Camera SetupAuto Mode BW ModePatrol Learn Pre03 Start Stop BW Mode 103 Off Auto1 Auto2Patrol Learn Patrol Learn 104 Start StopDisk Selection WJ-HD300 Series Only Auto Pan Setup and ActivationRepeat Playback Setting WJ-HD300 Series Only Recorder FunctionsDisplaying Camera and Playback Image WJ-HD500 Series Only System SetupSystem Functions Filtering ON/OFF WJ-HD300 Series Only304 Mux Still 305 Input Still CHMux Still Enter F1 Button Camera Cleaning Controller FunctionsTime & Date Search Display Pattern Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing Joystick Button Functions Camera FunctionSystem Function Patrol Play Auto PanCamera Sort Camera SequenceCamera +1 Iris ResetHome Position Auto FocusCamera Repeat Playback WJ-HD300 Series OnlyRecorded-image Copy WJ-HD500 Series Only Multiscreen Display Alarm Search WJ-HD200 Series / WJ-HD100 SeriesProblem Check item and Remedy Reference TroubleshootingProblem Check item and Remedy Reference Data Port SpecificationsStandard Accessories System ControllerPage 2004