Panasonic WV-CU650 operating instructions Group Address Setting for System Controller

Page 23

●Group Address Setting for System Controller

Note: Remain the factory default. When you have mistaken- ly changed the setting, recover the factory default as follows.

1.Select “Cnt G-Adr.” by rotating the JogDial. (Refer to Step 5 in p. 21.)

2.Press the CAM (SET) button.

The LCD display will change from the display mode to the editing mode.

PS • Data Com. Setup

Cnt G—Adr.B

3.Select a desired parameter by rotating the JogDial or pressing the + or – button.

You can select the desired parameter from “A” to “Z”. The factory default is “A”.

PS • Data Com. Setup

Cnt G—Adr.A

4.Press the MON (ESC) button.

The selected parameter will be determined, and the LCD display will return to the display mode.

PS • Data Com. Setup

Cnt G—Adr.A

●Group Address Setting for System Units

Note: Remain the factory default. When you have mistaken- ly changed the setting, recover the factory default as follows.

1.Select “Sys G-Adr.” by rotating the JogDial. (Refer to Step 5 in p. 21.)

2.Press the CAM (SET) button.

The LCD display will change from the display mode to the editing mode.

PS • Data Com. Setup

Sys G—Adr.B

3.Select "A" by rotating the JogDial or pressing the + or – button.

PS • Data Com. Setup

Sys G—Adr.A

4.Press the CAM (SET) button.

The parameter will be determined, and the cursor will jump to the sub parameter.

PS • Data Com. Setup

Sys G—Adr.A 05

5.Enter the unit number of system unit by rotating the JogDial or pressing the + or – button.

PS • Data Com. Setup

Sys G—Adr.A 01

Note: 1 to 99 is available for the unit number. The facto- ry default is 01.

6.Press the CAM (SET) button.

The sub parameter will be determined, and "OK" will appear on the LCD.

PS • Data Com. Setup

Sys G—Adr.A 01 OK

After a second, the LCD display will return to the status in Step 5.

If you set the unit numbers of other system units, repeat Step 5.

Note: If the parameters cannot be determined, "NG" will appear on the LCD. In this case, check the unit number of system unit, and repeat Step 3 to 6.

7.Press the MON (ESC) button.

The LCD display will return to the status in Step 2.

8.Press the MON (ESC) button again.

The LCD display will return from the editing mode to the display mode.

23

Image 23

Contents Operating Instructions English Version Important Safety Instructions Contents Preface FeaturesDo not attempt to disassemble the appliance PrecautionsLimitation of Liability Do not drop metallic parts through slotsNotification about System Units Document ConventionFront View Main Unit2Monitor lock/Logout button MON LOCK/LOGOUT 0Alarm recall button ALM RecallCamera function/System function button 1On-screen display button OSD@9History button History #3Preset/Program preset button PRESET/PGM#9Adjustment button Adjust @8Shuttle hold button Shuttle HoldRear View 3D Joystick Unit Mon02 Cam016 HD316 Default Status LCD Display After LoginLCD Display Descriptions Blinking Main Menu Menu FunctionsSub Menu Menu Functions Mon02 Cam016 HD316 Busy Controller No.1 No Exist ErrorMessages Displayed on the LCD InvalidBasic System Connections Installations and ConnectionsConnection with the 3D Joystick Unit Adjustment of 3D JoystickController NO. Switch Setting Setup Procedures HardwareSetup Procedures Mode Switch SettingSetting Mode Description Setup Procedures FirmwareAdministrator Password Entry Setting ModesOperation All ResetPS·Data Communication Setting Baud Rate Setting Wait Time Setting Parity Bit SettingStop Bit Setting Group Address Setting for System Units Group Address Setting for System ControllerTo Change the Administrator Password Database Copy PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗ PS·Data Operator Password CheckData Base Rx Mode Completed Sum=1733 PSD Password Check Admin PasswordBefore Operation Power-onPower-off LCD Bright LCD/BUZZER AdjustmentBuzzer Alarm Basic Operation FlowOperation Start Login Logout PS·Data Mode No User If You Have Forgotten the Login PasswordOperation Start Auto Login PS Data Mode Auto LoginRecorder Selection Unit SelectionSystem Unit Selection Camera Selection Monitor SelectionTour Sequence/Group Sequence System Unit ControlMultiscreen Display Electronic ZoomingSystem Function Control Search Playback How to Display Search ListsRecorder Control Manual RecordingAvailable buttons and functions Search Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2Example of searching filter display and settings Operation WJ-HD300 SeriesLCD display Search Mode HD500 Edit Group Alm CopySearch Mode HD500 Drive Operation WJ-HD500 SeriesMmm/DD/YYYY Hhmm Mar/16/2004 0132 PM Search Mode HD200Time & Date Search Playback Operation WJ-HD200 SeriesOther Available Functions Lens Iris Control Camera ControlCamera Panning/Tilting Control Zooming ControlCamera Function Control Preset Position ControlHome Position Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316 Camera Position ControlCamera Selection Recall Wiper ControlAuxiliary Control Operating Procedure Latch modeOperating Procedure Momentary mode Defroster ControlAlarm Suspension Alarm ControlSystem Controller Behavior during the Alarm Mode Alarm ResetAlarm Recall HD500 Edit Group Copy Operation WJ-HD100 Series Alarm Recall HD200 EditAlarm Recall HD100 Menu Flow Menu Function DescriptionsRecorder Functions HDD Menu Function CategoriesCamera Functions CAM Controller System Functions SYSJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Camera Function Assign a Code= Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off RstTo Assign Menu Functions to Joystick Function Buttons To Recall Button Functions and Joystick Button FunctionsTo Check Button Functions and Joystick Button Functions Function Check Camera Setup 101Menu Function Details Camera SetupAuto Mode BW ModePatrol Learn Pre03 Start Stop BW Mode 103 Off Auto1 Auto2Patrol Learn Patrol Learn 104 Start StopDisk Selection WJ-HD300 Series Only Auto Pan Setup and ActivationRepeat Playback Setting WJ-HD300 Series Only Recorder FunctionsDisplaying Camera and Playback Image WJ-HD500 Series Only System SetupSystem Functions Filtering ON/OFF WJ-HD300 Series OnlyMux Still Enter F1 Button 304Mux Still 305 Input Still CH Time & Date Search Display Pattern Camera CleaningController Functions Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing System Function Joystick Button FunctionsCamera Function Patrol Play Auto PanCamera Sort Camera SequenceCamera +1 Iris ResetHome Position Auto FocusRecorded-image Copy WJ-HD500 Series Only CameraRepeat Playback WJ-HD300 Series Only Multiscreen Display Alarm Search WJ-HD200 Series / WJ-HD100 SeriesProblem Check item and Remedy Reference TroubleshootingProblem Check item and Remedy Reference Data Port SpecificationsStandard Accessories System ControllerPage 2004