Panasonic WV-CU650 operating instructions Recorder Functions, Auto Pan Setup and Activation

Page 57

●Auto Pan Setup and Activation

You will set up and activate the auto pan function. The cam- era can pan between the start and end points you will set.

To set the start and end point of auto pan

1.Display “Auto Pan” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

Auto	Pan	Setup	105
Play	Rvrs	Start	End
F1	F2	F3	F4

2.By moving the 3D joystick, move the camera to a point you wish to start auto pan.

3.Press the F3 button.

The start point of auto pan will be set.

4.By moving the 3D joystick, move the camera to a point you wish to end auto pan.

5.Press the F4 button.

The end point of auto pan will be set.

To activate auto pan

Press the F1 button.

The auto pan will be activated, and the camera will pan between the set.

Notes:

•When you press the F2 button, the auto pan direction will be reversed.

•Auto pan will be canceled when you pan or tilt the selected camera by moving the 3D joystick.

■Recorder Functions

●Disk Selection (WJ-HD300 Series Only)

You will specify a disk for search playback.

1.Display “HD300 DiskSelect” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HD300 DiskSelect 201

Nr-A Cp-A Cpy1 Cpy2

F1

F2

F3

F4

2.Press one of the F1 to F4 buttons. The specified disk will be selected.

Available buttons and functions

F1: Nr-A

Specifies the normal or event recording area for playback.

F2: Cp-A

Specifies the copy area for playback.

F3: Cpy1

This function is reserved for future use.

F4: Cpy2

This function is reserved for future use.

3.When you specify a disk, the search list display will appear on the active monitor, and “Search Mode” menu will appear on the LCD. Then, perform the search play- back operation. (Refer to p. 35 Search Playback.)

Search Mode	HD300
Thumb	Text Copy

●A-B Repeat Playback Setting (WJ-HD300 Series Only)

You can playback the recorded images repeatedly by specifying the start point (A) and end point (B).

1.Display “HD300 A- B Repeat” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HD300 A—B Repeat 202

Start	End		Cancel
F1	F2	F3	F4

2.During playback, press the F1 button at the point you wish to start playback. The playback start point (A) will be set.

Note: To cancel the start point, press the F4 button.

3.Press the F2 button at the point you wish to end play- back. The playback end point (B) will be set, and the repeat playback will be performed between (A) and (B).

57

Image 57

Contents Operating Instructions English Version Important Safety Instructions Contents Preface FeaturesLimitation of Liability PrecautionsDo not drop metallic parts through slots Do not attempt to disassemble the applianceNotification about System Units Document ConventionFront View Main UnitCamera function/System function button 0Alarm recall button ALM Recall1On-screen display button OSD 2Monitor lock/Logout button MON LOCK/LOGOUT#9Adjustment button Adjust #3Preset/Program preset button PRESET/PGM@8Shuttle hold button Shuttle Hold @9History button HistoryRear View 3D Joystick Unit Default Status LCD Display After Login LCD Display DescriptionsMon02 Cam016 HD316 Main Menu Menu Functions Sub Menu Menu FunctionsBlinking Messages Displayed on the LCD Controller No.1 No Exist ErrorInvalid Mon02 Cam016 HD316 BusyBasic System Connections Installations and ConnectionsConnection with the 3D Joystick Unit Adjustment of 3D JoystickSetup Procedures Setup Procedures HardwareMode Switch Setting Controller NO. Switch SettingAdministrator Password Entry Setup Procedures FirmwareSetting Modes Setting Mode DescriptionAll Reset PS·Data Communication SettingOperation Baud Rate Setting Parity Bit Setting Stop Bit SettingWait Time Setting Group Address Setting for System Units Group Address Setting for System ControllerTo Change the Administrator Password Database Copy Data Base Rx Mode Completed Sum=1733 PS·Data Operator Password CheckPSD Password Check Admin Password PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗Power-on Power-offBefore Operation Buzzer Alarm LCD/BUZZER AdjustmentBasic Operation Flow LCD BrightOperation Start Login Operation Start Auto Login If You Have Forgotten the Login PasswordPS Data Mode Auto Login Logout PS·Data Mode No UserUnit Selection System Unit SelectionRecorder Selection Camera Selection Monitor SelectionMultiscreen Display System Unit ControlElectronic Zooming Tour Sequence/Group SequenceSystem Function Control Recorder Control How to Display Search ListsManual Recording Search PlaybackExample of searching filter display and settings Search Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2Operation WJ-HD300 Series Available buttons and functionsSearch Mode HD500 Drive Search Mode HD500 Edit Group Alm CopyOperation WJ-HD500 Series LCD displayTime & Date Search Playback Search Mode HD200Operation WJ-HD200 Series Mmm/DD/YYYY Hhmm Mar/16/2004 0132 PMOther Available Functions Camera Panning/Tilting Control Camera ControlZooming Control Lens Iris ControlPreset Position Control Home Position ControlCamera Function Control Camera Selection Recall Camera Position ControlWiper Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316Operating Procedure Momentary mode Operating Procedure Latch modeDefroster Control Auxiliary ControlSystem Controller Behavior during the Alarm Mode Alarm ControlAlarm Reset Alarm SuspensionAlarm Recall HD500 Edit Group Copy Alarm Recall HD200 Edit Alarm Recall HD100Operation WJ-HD100 Series Menu Flow Menu Function DescriptionsMenu Function Categories Camera Functions CAMRecorder Functions HDD Controller System Functions SYSJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons To Assign Menu Functions to Joystick Function Buttons Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off RstTo Recall Button Functions and Joystick Button Functions Camera Function Assign a Code=To Check Button Functions and Joystick Button Functions Function Check Camera Setup 101Auto Mode Camera SetupBW Mode Menu Function DetailsPatrol Learn BW Mode 103 Off Auto1 Auto2Patrol Learn 104 Start Stop Patrol Learn Pre03 Start StopRepeat Playback Setting WJ-HD300 Series Only Auto Pan Setup and ActivationRecorder Functions Disk Selection WJ-HD300 Series OnlySystem Functions System SetupFiltering ON/OFF WJ-HD300 Series Only Displaying Camera and Playback Image WJ-HD500 Series Only304 Mux Still 305 Input Still CHMux Still Enter F1 Button Camera Cleaning Controller FunctionsTime & Date Search Display Pattern Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing Joystick Button Functions Camera FunctionSystem Function Camera Sort Auto PanCamera Sequence Patrol PlayHome Position Iris ResetAuto Focus Camera +1Camera Repeat Playback WJ-HD300 Series OnlyRecorded-image Copy WJ-HD500 Series Only Multiscreen Display Alarm Search WJ-HD200 Series / WJ-HD100 SeriesProblem Check item and Remedy Reference TroubleshootingProblem Check item and Remedy Reference Standard Accessories SpecificationsSystem Controller Data PortPage 2004