Associating Recorder Numbers with Unit Numbers

Note: To return to Step 3, rotate the shuttle ring coun- terclockwise or move the 3D joystick to the left.

5.Select a desired unit number by performing either of the following.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

Cam-Unit Map

408

Cam016 Unit02

Note: You can select a unit number from 1 to 99.

6.Press the ENTER or CAM (SET) button. “Set OK?” will appear on the LCD.

Cam-Unit	Map		408
Cam016		Set	OK?

Note: To cancel the setting, press the EXIT or MON (ESC) button. The LCD display will return to Step 6.

7.Press the ENTER or CAM (SET) button again.

The specified camera channel and unit number will be set for the selected camera-unit map.

“Memory” will appear on the LCD for a few seconds, and the LCD display will return to Step 1.

Cam-Unit Map

408 Cam016 Memory

To delete a camera-unit map

1.Perform Step 1 and 4 in p. 66.

2.Press the CLEAR button.

“Clear OK?” will appear on the LCD.

Cam-Unit	Map		408
Cam016		Clear	OK?

Note: To cancel deleting the setting, press the EXIT or MON (ESC) button.

3.Press the ENTER or CAM (SET) button. The camera-unit map will be deleted.

“Erased” will appear on the LCD for a few seconds, and the LCD display will return to Step 3.

Cam-Unit Map

408

Cam016 Erased

Note: After all the camera-unit maps have been delet- ed, “Cam000” will appear for the camera channel area.

●Associating Recorder Numbers with Unit Numbers

You can register HDD-unit maps (the association settings of recorder numbers and unit numbers). Up to 16 HDD-unit maps can be registered. You can select a recorder by entering a desired recorder number.

Note: As the factory default, recorder numbers have been associated with unit numbers having the same num- bers. (“HDD01” with “Unit01”, “HDD02” with “Unit02”...)

1.Display “HDD-Unit Map” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

HDD-Unit Map

409 HDD01 Unit01

2.Select a desired recorder number by performing either of the following.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

HDD-Unit Map

409 HDD06 Unit06

Note: You can select a recorder number from 1 to 16.

3 .Rotate the shuttle ring clockwise or move the 3D joy-

stick to the right. The cursor will jump to the next item.

Note: To return to Step 2, rotate the shuttle ring coun- terclockwise or move the 3D joystick to the left.

4.Select a desired unit number by performing either of the following.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

HDD-Unit Map

409

HDD06 Unit05

Note: You can select a unit number from 1 to 99.

5.Press the ENTER or CAM (SET) button. “Set OK?” will appear on the LCD.

HDD-Unit	Map		409
HDD06		Set	OK?

Note: To cancel the setting, press the EXIT or MON (ESC) button. The LCD display will return to Step 4.