Panasonic WV-CU650 Setup Procedures Firmware, Administrator Password Entry, Setting Modes

Page 19

SETUP PROCEDURES (FIRMWARE)

Administrator Password Entry

If you log into the system in the administrator mode, PS·Data communication setting, all reset, operator pass- word check. and database copy will become available.

To activate the administrator mode, you need to enter the administrator password.

Notes:

The factory default of administrator password is “650”. However, for security, you should change the password setting. To change the setting, refer to p. 24.

Take a note of your administrator password.

Setting Modes

If you power on the system controller while pressing the fol- lowing buttons, the system will run in an associated setting mode.

Notes:

You cannot change the system from the following modes (refer to the diagram) to the normal operation mode. To start up the normal operation mode, turn off the system controller, and then turn on the controller again.

The administrator password entry is required for the fol- lowing modes.

Buttons pressed

Setting Mode

Description

while

 

 

the power-on

 

 

 

 

 

2, 4, and 6

All reset

The communication

 

 

settings and

 

 

PS·Data database

 

 

can be restored to

 

 

the factory default.*

MON (ESC) and 6

PS·Data

PS·Data communi-

 

Communication

cation setting can

 

setting

be performed.

 

 

 

MON (ESC) and 1

Administrator

The administrator

 

password change

password can be

 

 

changed.

 

 

 

MON (ESC) and 2

PS·Data database

The PS·Data data-

 

copy

base can be copied

 

 

from the source

 

 

system controller

 

 

(Controller No. 1) to

 

 

a destination sys-

 

 

tem controller.

 

 

 

MON (ESC) and 4

PS·Data password

The passwords of

 

display

up to 16 operators

 

 

can be displayed

 

 

on the LCD.

*The panning, tilting, and zooming calibration settings are not restored.

19

Image 19
Contents Operating Instructions English Version Important Safety Instructions Contents Preface FeaturesDo not attempt to disassemble the appliance PrecautionsLimitation of Liability Do not drop metallic parts through slotsNotification about System Units Document ConventionFront View Main Unit2Monitor lock/Logout button MON LOCK/LOGOUT 0Alarm recall button ALM RecallCamera function/System function button 1On-screen display button OSD@9History button History #3Preset/Program preset button PRESET/PGM#9Adjustment button Adjust @8Shuttle hold button Shuttle HoldRear View 3D Joystick Unit LCD Display Descriptions Default Status LCD Display After LoginMon02 Cam016 HD316 Sub Menu Menu Functions Main Menu Menu FunctionsBlinking Mon02 Cam016 HD316 Busy Controller No.1 No Exist ErrorMessages Displayed on the LCD InvalidBasic System Connections Installations and ConnectionsConnection with the 3D Joystick Unit Adjustment of 3D JoystickController NO. Switch Setting Setup Procedures HardwareSetup Procedures Mode Switch SettingSetting Mode Description Setup Procedures FirmwareAdministrator Password Entry Setting ModesPS·Data Communication Setting All ResetOperation Baud Rate Setting Stop Bit Setting Parity Bit SettingWait Time Setting Group Address Setting for System Units Group Address Setting for System ControllerTo Change the Administrator Password Database Copy PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗ PS·Data Operator Password CheckData Base Rx Mode Completed Sum=1733 PSD Password Check Admin PasswordPower-off Power-onBefore Operation LCD Bright LCD/BUZZER AdjustmentBuzzer Alarm Basic Operation FlowOperation Start Login Logout PS·Data Mode No User If You Have Forgotten the Login PasswordOperation Start Auto Login PS Data Mode Auto LoginSystem Unit Selection Unit SelectionRecorder Selection Camera Selection Monitor SelectionTour Sequence/Group Sequence System Unit ControlMultiscreen Display Electronic ZoomingSystem Function Control Search Playback How to Display Search ListsRecorder Control Manual RecordingAvailable buttons and functions Search Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2Example of searching filter display and settings Operation WJ-HD300 SeriesLCD display Search Mode HD500 Edit Group Alm CopySearch Mode HD500 Drive Operation WJ-HD500 SeriesMmm/DD/YYYY Hhmm Mar/16/2004 0132 PM Search Mode HD200Time & Date Search Playback Operation WJ-HD200 SeriesOther Available Functions Lens Iris Control Camera ControlCamera Panning/Tilting Control Zooming ControlHome Position Control Preset Position ControlCamera Function Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316 Camera Position ControlCamera Selection Recall Wiper ControlAuxiliary Control Operating Procedure Latch modeOperating Procedure Momentary mode Defroster ControlAlarm Suspension Alarm ControlSystem Controller Behavior during the Alarm Mode Alarm ResetAlarm Recall HD500 Edit Group Copy Alarm Recall HD100 Alarm Recall HD200 EditOperation WJ-HD100 Series Menu Flow Menu Function DescriptionsCamera Functions CAM Menu Function CategoriesRecorder Functions HDD Controller System Functions SYSJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Camera Function Assign a Code= Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off RstTo Assign Menu Functions to Joystick Function Buttons To Recall Button Functions and Joystick Button FunctionsTo Check Button Functions and Joystick Button Functions Function Check Camera Setup 101Menu Function Details Camera SetupAuto Mode BW ModePatrol Learn Pre03 Start Stop BW Mode 103 Off Auto1 Auto2Patrol Learn Patrol Learn 104 Start StopDisk Selection WJ-HD300 Series Only Auto Pan Setup and ActivationRepeat Playback Setting WJ-HD300 Series Only Recorder FunctionsDisplaying Camera and Playback Image WJ-HD500 Series Only System SetupSystem Functions Filtering ON/OFF WJ-HD300 Series OnlyMux Still 305 Input Still CH 304Mux Still Enter F1 Button Controller Functions Camera CleaningTime & Date Search Display Pattern Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing Camera Function Joystick Button FunctionsSystem Function Patrol Play Auto PanCamera Sort Camera SequenceCamera +1 Iris ResetHome Position Auto FocusRepeat Playback WJ-HD300 Series Only CameraRecorded-image Copy WJ-HD500 Series Only Multiscreen Display Alarm Search WJ-HD200 Series / WJ-HD100 SeriesProblem Check item and Remedy Reference TroubleshootingProblem Check item and Remedy Reference Data Port SpecificationsStandard Accessories System ControllerPage 2004