@8Shuttle hold button Shuttle Hold, #0- button

@8Shuttle hold button (SHUTTLE HOLD)

•If you press this button while rotating the shuttle ring, playback speed will be maintained even after removing a hand from the shuttle ring. (The LED indicator on this button blinks during the fast playback.)

Note: This operation differs from “Hold playback speed” performed by holding the shuttle ring of recorder. When you hold the playback speed from the system controller, the EL-ZOOM, MULTI- SCREEN, and OSD buttons are unavailable.

•If you press this button again, normal playback speed is recovered.

@9History button (HISTORY)

When you press the + or – button while holding down this button, camera images selected in the past are dis- played in order or in reverse order.

#0– button [–]

This button is pressed when selecting a camera with the lower channel number. During setup, this button is pressed to decrease the value of selected parameter.

#1+ button [+]

This button is pressed when selecting a camera with the higher channel number. During setup, this button is pressed to increase the value of selected parameter.

#2Recorder/Unit Selection button (RECORDER/UNIT)

•Selects a recorder.

•When you press while holding down the SHIFT button, this button selects a system unit.

#3Preset/Program preset button (PRESET/PGM

PRESET)

•Recalls a preset position or the home position of combi- nation camera.

•When you press while holding down the SHIFT button, this button programs preset positions.

#4Camera position button (CAM POSI)

This button is pressed to select the camera position (the combination of camera number and preset posi- tion).

#5Numeric buttons (0, 1 to 9)

Enters camera numbers, monitor numbers, or unit num- bers, etc.

#6Monitor/Escape button (MON (ESC))

•Selects a monitor.

•When pressed during setup, this button determines the current selection to return to the main menu.

#7 Camera/Set button (CAM (SET))

•Selects a camera.

•When pressed during setup, this button selects an item to go to a submenu.

#8LCD (Liquid Crystal Display)

Displays the numbers of unit, monitor and camera cur- rently selected. The LCD also displays the functions assigned to F1 to F8 buttons.

#9Adjustment button (ADJUST)

This button is pressed to perform the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer.

$0Menu button (MENU)

Displays the list of menu functions on the LCD. Menu functions are assignable to the function buttons (F1 to F4/F5 to F8) or joystick function buttons (A, B, and top buttons).

$1Function buttons (F1 to F4/F5 to F8)

Recall button functions you assign.

Note: When you press while holding down the SHIFT button, the F1 to F4 buttons become F5 to F8.

$2Exit button (EXIT)

While a menu function, determined with the ENTER but- ton, is being displayed on the LCD, this button is pressed to return to the upper menu.

$3Enter button (ENTER)

While menu functions are displayed on the LCD, this button is determines a function to assign.

$4Feet

When extending these feet, you can raise the front side by approx. 1 cm {0.39 in.}.