Panasonic WV-CU650 BW Mode 103 Off Auto1 Auto2, Patrol Learn 104 Start Stop

Page 56

BW Mode

 

103

On

Off

Auto1

Auto2

F1

F2

F3

F4

2.Press one of the F1 to F4 buttons. BW mode will be activated.

Available buttons and functions

F1: On

Changes the camera image from color to black and white.

F2: Off

Changes the camera image from black and white to color .

F3: Auto1

Activates Auto 1 mode. (The camera selects black and white mode if the picture is dark, or color mode if the picture is bright enough.)

F4: Auto2

Activates Auto 2 mode. (The camera detects the light source type to prevent malfunction. This set- ting is applicable when using a near-infrared light source in a dark place.)

Notes:

•The camera detects light source based on the informa- tion the CCD image pickup element receives. If an object is continuously moving or has the same color as the background, the object may not be properly recog- nized. When activating Auto 2 mode, make sure the wavelength of light source is 800 nm or more.

•If the available parameters for selected camera are ON, OFF, and AUTO, you can activate AUTO by pressing the F3 button.

To recover the color mode

Press the F2 button. The color mode is recovered for the camera image.

●Patrol Learn

You will perform the patrol learn setup.

Note: Refer to the operating instructions of camera for details on patrol learn.

1.Display “Patrol Learn” sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.)

Patrol

Learn

104

Start

Stop

 

 

F1

F2

F3

F4

2.Press the F1 button.

The patrol learn setup will start.

3.Perform desired camera operations by moving the 3D joystick or zoom wheel controller, etc.

The following controls are available for patrol learn.

•Panning/Tilting (3D joystick)

•Iris control (IRIS OPEN/CLOSE buttons)

•Focus control (FOCUS FAR/NEAR buttons)

•Zoom control (Zoom wheel controller)

•Preset position

Note: The available total time of patrol learn differs depending on cameras. When the time is over, the patrol learn setup will automatically stop.

4. To quit the patrol learn setup, press the F2 button.

To activate preset positions during the patrol learn

To move the camera to a preset position during the patrol learn, you will perform the following operations after Step 2 of Patrol Learn.

1.Enter a preset position number.

The entered number will appear on the LCD.

Patrol

Learn

____3

Start

Stop

 

 

F1

F2

F3

F4

Note: To cancel the entry, press the CLEAR button.

2.Press the PRESET/PGM PRESET button.

“Pre=nn” (nn is a number.) will blink on the LCD, and the camera will move to the preset position.

Patrol Learn Pre03

Start Stop

F1

F2

F3

F4

Note: After the camera has moved to the preset posi- tion, “Pre-nn” will go out.

56

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Operating Instructions English Version Important Safety Instructions Contents Features PrefacePrecautions Limitation of LiabilityDo not drop metallic parts through slots Do not attempt to disassemble the applianceDocument Convention Notification about System UnitsMain Unit Front View0Alarm recall button ALM Recall Camera function/System function button1On-screen display button OSD 2Monitor lock/Logout button MON LOCK/LOGOUT#3Preset/Program preset button PRESET/PGM #9Adjustment button Adjust@8Shuttle hold button Shuttle Hold @9History button HistoryRear View 3D Joystick Unit Mon02 Cam016 HD316 Default Status LCD Display After LoginLCD Display Descriptions Blinking Main Menu Menu FunctionsSub Menu Menu Functions Controller No.1 No Exist Error Messages Displayed on the LCDInvalid Mon02 Cam016 HD316 BusyInstallations and Connections Basic System ConnectionsAdjustment of 3D Joystick Connection with the 3D Joystick UnitSetup Procedures Hardware Setup ProceduresMode Switch Setting Controller NO. Switch SettingSetup Procedures Firmware Administrator Password EntrySetting Modes Setting Mode DescriptionOperation All ResetPS·Data Communication Setting Baud Rate Setting Wait Time Setting Parity Bit SettingStop Bit Setting Group Address Setting for System Controller Group Address Setting for System UnitsTo Change the Administrator Password Database Copy PS·Data Operator Password Check Data Base Rx Mode Completed Sum=1733PSD Password Check Admin Password PSD Password Check Admin Password ∗ ∗ ∗ ∗ ∗Before Operation Power-onPower-off LCD/BUZZER Adjustment Buzzer AlarmBasic Operation Flow LCD BrightOperation Start Login If You Have Forgotten the Login Password Operation Start Auto LoginPS Data Mode Auto Login Logout PS·Data Mode No UserRecorder Selection Unit SelectionSystem Unit Selection Monitor Selection Camera SelectionSystem Unit Control Multiscreen DisplayElectronic Zooming Tour Sequence/Group SequenceSystem Function Control How to Display Search Lists Recorder ControlManual Recording Search PlaybackSearch Mode HD300 List Text Copy Nr-A Cp-A Cpy1 Cpy2 Example of searching filter display and settingsOperation WJ-HD300 Series Available buttons and functionsSearch Mode HD500 Edit Group Alm Copy Search Mode HD500 DriveOperation WJ-HD500 Series LCD displaySearch Mode HD200 Time & Date Search PlaybackOperation WJ-HD200 Series Mmm/DD/YYYY Hhmm Mar/16/2004 0132 PMOther Available Functions Camera Control Camera Panning/Tilting ControlZooming Control Lens Iris ControlCamera Function Control Preset Position ControlHome Position Control Camera Position Control Camera Selection RecallWiper Control Mon02 Cam001 HD316 F1 F2 F3 F4 Mon01 C-P011 HD316Operating Procedure Latch mode Operating Procedure Momentary modeDefroster Control Auxiliary ControlAlarm Control System Controller Behavior during the Alarm ModeAlarm Reset Alarm SuspensionAlarm Recall HD500 Edit Group Copy Operation WJ-HD100 Series Alarm Recall HD200 EditAlarm Recall HD100 Menu Function Descriptions Menu FlowRecorder Functions HDD Menu Function CategoriesCamera Functions CAM System Functions SYS ControllerJoystick Button Functions J/S Menu To Recall Menu Functions To Assign Menu Functions to Function Buttons Mon02 Cam128 HD316 F1 F2 F3 F4 Camera Setup Off Rst To Assign Menu Functions to Joystick Function Buttons To Recall Button Functions and Joystick Button Functions Camera Function Assign a Code=Function Check Camera Setup 101 To Check Button Functions and Joystick Button FunctionsCamera Setup Auto ModeBW Mode Menu Function DetailsBW Mode 103 Off Auto1 Auto2 Patrol LearnPatrol Learn 104 Start Stop Patrol Learn Pre03 Start StopAuto Pan Setup and Activation Repeat Playback Setting WJ-HD300 Series OnlyRecorder Functions Disk Selection WJ-HD300 Series OnlySystem Setup System FunctionsFiltering ON/OFF WJ-HD300 Series Only Displaying Camera and Playback Image WJ-HD500 Series OnlyMux Still Enter F1 Button 304Mux Still 305 Input Still CH Time & Date Search Display Pattern Camera CleaningController Functions Auto Login/Logout Setup Operator Registration or Change Function Level Setting Camera Level Setting Camera Position Registration or Clearing Associating Camera Numbers with Unit Numbers Associating Recorder Numbers with Unit Numbers LCD Title Editing System Function Joystick Button FunctionsCamera Function Auto Pan Camera SortCamera Sequence Patrol PlayIris Reset Home PositionAuto Focus Camera +1Recorded-image Copy WJ-HD500 Series Only CameraRepeat Playback WJ-HD300 Series Only Alarm Search WJ-HD200 Series / WJ-HD100 Series Multiscreen DisplayTroubleshooting Problem Check item and Remedy ReferenceProblem Check item and Remedy Reference Specifications Standard AccessoriesSystem Controller Data PortPage 2004
Top Page Image Contents