Panasonic WJ-SX650 manual Monitor Display Information

Page 13

!3VS Output Connector (VS OUT)

!4Serial Port (SERIAL)

Supplies VS output signals to external devices. While !1

Connects to a PC.

is accepting a VS input signal, !3supplies an output

 

signal synchronizing the VS input signal. While !1is not

Note: When q is set as Video Output Board 2, r, !1,

accepting the VS input signal, !3supplies an internal

!2, !3, and !4are not available.

synchronization output signal.

 

■Monitor Display Information

The following are the details on terminal mode operations. For PS·Data operations, refer to p. 48 OPERATION (OTHER THAN THE TERMINAL MODE) or the operating instructions of system controllers.

q

 

w

r

e

 

qTime and Date Information

Current time and date are displayed.

During daylight saving time (summer time), "∗" is dis-

played beside the time. Example: Aug/02/2005 ∗20:15:56

Note: While a recorder is being selected, time and date are not displayed.

wMonitor Status Information Monitor number

M01 to 32: Monitor number

Note: During monitor lock, monitor number is highlight- ed.

Controller number

Displays a device that selects and controls the monitor. K1-1 to 8-4: Terminal mode system controller

(Example: For K8-4, "8" means the terminal (TMNL) number and "4" means the controller number of sys- tem controller.)

PSD: PS·Data mode system controller

PC: PC connected to the SERIAL port

/T001 to 128: Timer event

Sequence number

Displays the active sequence number.

T01 to 32: Tour sequence number

G01 to 32: Group sequence number

Note: During sequence pause, "P" is displayed beside the sequence number.

eCamera Information Camera number

C001 to 999: Camera number

R01 to 16: Recorder number

Camera title

Displays the registered camera title.

Camera title setting is performed in "Camera" – "Camera Title" of WJ-SX650 Series Administrator Console.

rEvent Information

TERMINAL001 to 256: Terminal alarm has occurred. (Example: For TERMINAL001, "001" means the number of alarm input signal accepted by the ALARM IN port of video input board.)

CAMERA001 to 099: Camera alarm has occurred. (Example: For CAMERA001, "001" means the num- ber of camera supplying an alarm input signal to the unit.)

RECORDER001 to 999: Recorder alarm has occurred. (Example: For RECORDER001, "001" means the

number of camera associated with the recorder supplying an alarm input signal to the unit.)

SERIAL0001 to 1024: Serial alarm has occurred. (Example: For SERIAL0001, "0001" means the serial

command alarm input number.)

VIDEO LOSS001 to 999: Video loss has occurred.

(Example: For VIDEO LOSS001, "001" means the num-

ber of camera to which video loss has occurred) SUSPEND: Alarm is suspended.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model Nos. WJ-SX650 Series English Version Important Safety Instructions Contents Limitation of Liability Disclaimer of WarrantyTrademarks and Registered Trademarks Precautions Preparations pages xx, xx, xx About These Operating InstructionsAuthentication by user IDs, passwords, and level settings FeaturesTimer event and camera event can be scheduled Alarm operation and alarm event can be scheduledFront View WJ-SX650 Matrix Switcher/WJ-SX650U Card CageRear View 1Signal Ground Terminal Signal GNDA-3/IN B-3/IN C-3 board Video Input Board WJ-PB65C32X-2 board IN-3 boardOUT X-3 board Video Output Board WJ-PB65M16OUT X-2 board OUT X-1 boardMonitor Display Information WV-CU950/650 System Controller Display InformationCamera/recorder/sequence number 001 to 999 Camera number WV-CU360C/CJChecking Board Composition InstallationsSwitch Settings for Video Input Main Board Front view of video output main board Switch Settings for Video Output Main BoardHost Func Mounting Video Input and Output Boards Board Mounting Procedure Places to avoid Installing the Main UnitRack Mounting EIA equivalents Products of other manufacturers EIARecommended ConnectionsStandards This unit x 1, camera x 30, monitor x 16, and recorder x Basic System ConnectionsThis unit x 3, camera x 150, monitor x 32, and recorder x Expanded System ConnectionsThis unit x 4, camera x 240, monitor x 32, and recorder x Line termination OFF Card Cage ConnectionsRS-485 Camera Connections Camera ConnectionsOFF Daisy Chain Connection ConnectionWV-CA48/JN PC Connection Monitor ConnectionsRecorder Connection Connection to Video Output Connectors of RecordersRecorders unit address Camera in channel Video input board Recorder number Unit Address System Video OUTConnection between Recorders and Video Input Boards OFF Terminal Mode Connection Recorder SettingsSystem Controller Connection Example PS·Data Mode ConnectionExternal Device Connections Alarm Sensor ConnectionsPin No Designation GNDTerminal Duration Remarks System Status CheckDisplay example of System Status MonitorSetup Menu Setup ProcedureRecorder 1 to 10 on Recorder 11 to 16 OFF Data 1, 2, 5 and 6 ports Tmnl Data 3, 4, 7 and 8 ports HDRSetup Menu Installation and Uninstallation WJ-SX650 Series Administrator ConsoleInstallation UninstallationStarting Up User Name admin Password sx650Window Details Tool BarReference No Explanation Tooltip Details2005 to 2099 Year ON, OFF, AUTO, B/W setting Display SystemCamera SequenceSchedule AlarmOperator Communication ControllerBasic Operations Setup Menu OSDTop Menu Year Alarm MenuMonth Day TimeRecorder Alarm Terminal Alarm MenuInput Board Data Port Menu System Menu800 bps/9 600 bps/19 200 bps/38 400 bps Data bit 8 bits Parity check None Stop bit 1 bitRS485 Camera Menu VD2/DATA/CABLE Compensation MenuVD2 RS485Information Operator Registration Login and LogoutOperation Start Login Power-on/offOperation Start/End Auto Login/Logout Operation End LogoutMonitor Selection Monitor ControlMonitor Lock Camera Control Preset Position ControlCamera Selection Camera Selection RecallAvailable buttons and functions F1 All home positions All Cameras ControlRecorder Control Recorder Selection Recorder Control EndRunning Sequence Group PresetDescriptions of Sequence Tour SequenceSetting item Parameter Remarks Sequence SettingTour Sequence Group Sequence/PresetSequence Stop Sequence PauseAvailable operations during sequence pause Sequence step forward/backwardAlarm Occurrence Alarm DescriptionsTerminal alarm setting Group Sequence/Preset Alarm ModesVideo Loss SpotAlarm Control Alarm Suspension Return to Alarm Mode StatusAlarm History Display Details on Alarm History DisplayREC Timer Event Timer DescriptionsCamera Event Auto TrackCleaning Alarm in Camera Not UseBW and Scene Patrols Scene PatrolsAlarm recover WV-CU950/650 Terminal Mode OperationLists of Operations and Functions Operation list of WV-CU950/650 and WV-CU360C/CJFunction WV-CU950/650 Function list of WV-CU950/650 and WV-CU360C/CJWV-CU950/650, WV CU360C/CJALL Shift + SetupCAM ID EventShift + ALM ALL Reset Shift + ALL Reset ALM ResetALM Recall ACKCamera control Focus Near Focus FARFocus FAR + Focus NearWiper DEF on Shift + DEF on OFF DEF OFF Shift + DEF OFF Recorder controlShift + CAM Func OSD ON/OFF OSD→ Multi Screen Screen SELPause PlayGO to Last StopRecorder + If you press the Menu button without selecting a recorder Menu Flow WV-CU950/650If you select a recorder, and then press the Menu button If you select a recorder, and then press the Search buttonPS·Data Mode Operations Operation Other than Terminal ModeControlling from a PC Controlling from a Web Browser Accessing a RecorderConnections and Operations Alarm event Refer to p Camera Access Refer to p Recorder Access Refer to pGlossary Monitor lock Refer to pPage Matrix Switcher WJ-SX650 Series TroubleshootingRS-485 communication Coaxial communicationProblem Check item and remedy Check if the alarm event has been set WJ-SX650 Series Administrator Console Problem Check item and remedy Reference Power Cord, Connectors, and Power PlugMatrix Switcher WJ-SX650 Series SpecificationsVideo Input Board WJ-PB65C21 Card Cage WJ-SX650UVideo Output Board WJ-PB65M16 Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K Standard AccessoriesSub/BNC Video Cable WJ-CA68 CD-ROMN0805-0 V8QA6300AN
Top Page Image Contents