Panasonic WJ-SX650 manual Alarm Descriptions, Alarm Occurrence, Terminal alarm setting

Page 66

ALARM DESCRIPTIONS

Alarm Occurrence

When this unit accept an alarm input signal (terminal alarm, camera alarm, recorder alarm, serial alarm, or video loss), an alarm event (tour sequence, etc.) is activated automatically. Each alarm input signal is associated with an alarm event setting. (The setting activates the alarm input signal and alarm event.) Up to 1 024 alarm event settings are available. The alarm event setting is performed in "Alarm" – "Alarm Event" of WJ-SX650 Series Administrator Console.

By performing the settings of "Alarm Event", the following events will be activated when this unit accepts an alarm input signal.

Alarm event information will be displayed on the associated monitors (Refer to p. 16 Monitor Display Information.)

Depending on the setting of "Display Mode", camera images will be displayed, or sequences will be activated on the asso- ciated monitors. In this document, these actions are mentioned as the alarm mode, and pictures displayed during the alarm mode is mentioned as alarm pictures.

If a recorder is selected for "Recording Source LCN", event recording will be activated. (Recording will follow the command alarm setting and event recording setting of recorder. Refer to the operating instructions of recorder for details.)

If an alarm output terminal is selected for "Alarm Output", alarm output signal will be supplied from the video output board. The associated recorder can be notified of the alarm occurrence, and external alarm devices (buzzer, etc.) can be activat- ed.

Notes:

To activate terminal alarm output signals, perform settings of No.1 to 64. No.65 and greater are assigned for serial commands.

To activate serial alarm output signals, serial command settings are required. The settings are performed in "Communication" – "Serial Command" of WJ-SX650 Series Administrator Console.

ALARM indicators of all system controllers blink.

Up to 10 000 alarm records are saved chronologically. The latest 1 000 alarm records can be displayed as the alarm his- tory on the monitor. (Refer to p. 33 Alarm History Display.) The Alarm History Display can be downloaded from the PC to the unit.

Alarm information is notified to the PC in serial commands. The serial command setting is performed in "Communication" – "Serial Command" of WJ-SX650 Series Administrator Console.

Camera 100

This unit Alarm Output 50

 

Preset Position 1

 

(Zooming in No.1 (Entrance))

650

Terminal Alarm

 

256

Monitor 5

No.1 (Entrance)

 

Alarm input signal from a sensor

Records the image of Camera 10. (Recording follows the command alarm setting and event recording setting of recorder.)

1

2

3

4

5

6

7

8

9

10/0

11

12

13

14

15

16

Recorder 10

Notifies the

PC

alarm event

occurrence.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm Input 256

 

 

 

 

 

 

Sensor

 

 

 

 

 

 

system

 

 

 

 

Infrared sensor

 

 

 

 

Terminal alarm setting

 

 

 

 

 

No.

Display Mode

Spot

 

Monitor

Recording

Alarm Output

LCN

Preset

Source (LCN)

 

 

 

 

 

 

 

 

 

256

SPOT

100

1

5

10

50

66

Image 66
Contents Model Nos. WJ-SX650 Series English Version Important Safety Instructions Contents Disclaimer of Warranty Limitation of LiabilityTrademarks and Registered Trademarks Precautions About These Operating Instructions Preparations pages xx, xx, xxTimer event and camera event can be scheduled FeaturesAuthentication by user IDs, passwords, and level settings Alarm operation and alarm event can be scheduledWJ-SX650 Matrix Switcher/WJ-SX650U Card Cage Front View1Signal Ground Terminal Signal GND Rear ViewX-2 board Video Input Board WJ-PB65C32A-3/IN B-3/IN C-3 board IN-3 boardOUT X-2 board Video Output Board WJ-PB65M16OUT X-3 board OUT X-1 boardMonitor Display Information System Controller Display Information WV-CU950/650WV-CU360C/CJ Camera/recorder/sequence number 001 to 999 Camera numberInstallations Checking Board CompositionSwitch Settings for Video Input Main Board Switch Settings for Video Output Main Board Front view of video output main boardHost Func Mounting Video Input and Output Boards Board Mounting Procedure Rack Mounting Installing the Main UnitPlaces to avoid EIA equivalents Products of other manufacturers EIAConnections RecommendedStandards Basic System Connections This unit x 1, camera x 30, monitor x 16, and recorder xExpanded System Connections This unit x 3, camera x 150, monitor x 32, and recorder xThis unit x 4, camera x 240, monitor x 32, and recorder x Card Cage Connections Line termination OFFCamera Connections RS-485 Camera ConnectionsOFF Connection Daisy Chain ConnectionWV-CA48/JN Monitor Connections PC ConnectionConnection to Video Output Connectors of Recorders Recorder ConnectionRecorders unit address Camera in channel Video input board Video OUT Recorder number Unit Address SystemConnection between Recorders and Video Input Boards OFF Recorder Settings Terminal Mode ConnectionSystem Controller Connection PS·Data Mode Connection ExamplePin No Designation Alarm Sensor ConnectionsExternal Device Connections GNDDisplay example of System Status System Status CheckTerminal Duration Remarks MonitorRecorder 1 to 10 on Recorder 11 to 16 OFF Setup ProcedureSetup Menu Data 1, 2, 5 and 6 ports Tmnl Data 3, 4, 7 and 8 ports HDRSetup Menu Installation WJ-SX650 Series Administrator ConsoleInstallation and Uninstallation UninstallationWindow Details User Name admin Password sx650Starting Up Tool BarTooltip Details Reference No Explanation2005 to 2099 Year ON, OFF, AUTO, B/W setting Camera SystemDisplay SequenceAlarm ScheduleOperator Controller CommunicationSetup Menu OSD Basic OperationsTop Menu Month Alarm MenuYear Day TimeTerminal Alarm Menu Recorder AlarmInput Board 800 bps/9 600 bps/19 200 bps/38 400 bps System MenuData Port Menu Data bit 8 bits Parity check None Stop bit 1 bitVD2 VD2/DATA/CABLE Compensation MenuRS485 Camera Menu RS485Information Login and Logout Operator RegistrationOperation Start/End Auto Login/Logout Power-on/offOperation Start Login Operation End LogoutMonitor Control Monitor SelectionMonitor Lock Camera Selection Preset Position ControlCamera Control Camera Selection RecallAll Cameras Control Available buttons and functions F1 All home positionsRecorder Control Recorder Control End Recorder SelectionDescriptions of Sequence Group PresetRunning Sequence Tour SequenceSequence Setting Setting item Parameter RemarksGroup Sequence/Preset Tour SequenceAvailable operations during sequence pause Sequence PauseSequence Stop Sequence step forward/backwardAlarm Descriptions Alarm OccurrenceTerminal alarm setting Video Loss Alarm ModesGroup Sequence/Preset SpotAlarm Control Alarm History Display Return to Alarm Mode StatusAlarm Suspension Details on Alarm History DisplayREC Camera Event Timer DescriptionsTimer Event Auto TrackBW and Scene Patrols Alarm in Camera Not UseCleaning Scene PatrolsLists of Operations and Functions Terminal Mode OperationAlarm recover WV-CU950/650 Operation list of WV-CU950/650 and WV-CU360C/CJWV-CU950/650, WV Function list of WV-CU950/650 and WV-CU360C/CJFunction WV-CU950/650 CU360C/CJCAM ID Shift + SetupALL EventALM Recall ALM ResetShift + ALM ALL Reset Shift + ALL Reset ACKCamera control Focus FAR + Focus Focus FARFocus Near NearWiper Recorder control DEF on Shift + DEF on OFF DEF OFF Shift + DEF OFFShift + CAM Func → Multi Screen OSDOSD ON/OFF Screen SELGO to Last PlayPause StopRecorder + If you select a recorder, and then press the Menu button Menu Flow WV-CU950/650If you press the Menu button without selecting a recorder If you select a recorder, and then press the Search buttonOperation Other than Terminal Mode PS·Data Mode OperationsControlling from a Web Browser Accessing a Recorder Controlling from a PCConnections and Operations Glossary Camera Access Refer to p Recorder Access Refer to pAlarm event Refer to p Monitor lock Refer to pPage Troubleshooting Matrix Switcher WJ-SX650 SeriesCoaxial communication RS-485 communicationProblem Check item and remedy Check if the alarm event has been set WJ-SX650 Series Administrator Console Power Cord, Connectors, and Power Plug Problem Check item and remedy ReferenceSpecifications Matrix Switcher WJ-SX650 SeriesCard Cage WJ-SX650U Video Input Board WJ-PB65C21Video Output Board WJ-PB65M16 Sub/BNC Video Cable WJ-CA68 Standard AccessoriesExpansion Cable Kit WJ-CA65L20K/WJ-CA65L07K CD-ROMN0805-0 V8QA6300AN