Panasonic WJ-SX650 manual Return to Alarm Mode Status, Alarm Suspension, Alarm History Display

Page 69

Notes:

Alarm all reset will also be conducted when setting changes are performed in SETUP MENU or WJ-SX650 Series Administrator Console.

To reset the alarms occurred to recorders, perform alarm all reset. Alarm all reset is available even while no alarms are occurring.

WV-CU360C/CJ

Press the OSD and ALM H buttons at a time. The Alarm History Display will appear on the selected monitor.

Return to Alarm Mode Status

You can recover from the ACK status to the alarm mode status.

WV-CU950/650

Press the ACK button while holding down the SHIFT button. The alarm mode will be recovered.

WV-CU360C/CJ

This operation is not available.

Alarm Suspension

You can suspend the unit from accepting alarm input sig- nals when you do not want to be disturbed.

1.Press the ALM SUSPEND*1 (or SUSPEND*2) button while holding down the SHIFT button.

The alarm will be suspended. *1 WV-CU950/650

*2 WV-CU360C/CJ

2.To cancel the alarm suspension mode, press the ALM SUSPEND button while holding down the SHIFT button again.

Alarm History Display

The latest 1 000 alarm records (date, time and details) can be displayed as the alarm history on an active monitor.

Note: Alarm History Display is not available on monitors in the alarm mode or during recorder selection.

WV-CU950/650

Press the ALM RECALL button. The Alarm History Display will appear on the selected monitor.

Details on Alarm History Display

ALARM

HISTORY

 

 

1 of

100

M D Y H M S

ALARM

ACTION

 

REC

Aug31/0611:59:00PM

ALL

12345

K4-8

Aug31/0611:58:00PM

C-999

M32

C100

001

Aug31/0611:57:00PM

V-001

M03

T32

256

Aug31/0611:56:00PM

 

POWER

 

Apr15/0509:15:25AM

 

POWER

 

Apr15/0509:15:25AM

R-003

 

 

 

Apr15/0509:13:54AM

S-0002

M10*G32

———

Apr15/0509:12:32AM

T-001

M20

———

999

Jan02/05

03:05:10PM

S

6789

 

PC

Jan01/05

03:04:08PM

S

101

 

PSD

T-TERMINAL C-CAMERA

 

R-RECORDER

S-SERIAL

V-VIDEO

LOSS

SSUSPEND

 

 

 

 

 

 

 

"" beside the time indicates daylight saving time (sum- mer time).

The following items are display details.

• ALARM (Highlighted for reset alarms)

T-001 to 256: Terminal alarm

(Example: For T-001, "001" means the number of alarm input signal accepted by the ALARM IN port of video input board.)

C-001 to 999: Camera alarm

(Example: For C-001, "001" means the number of camera supplying an alarm input signal to the unit.)

R-001 to 999: Recorder alarm

(Example: For R-001, "001" means the number of camera associated with the recorder supplying an alarm input signal to the unit.)

S-0001 to 1024: Serial alarm

(Example: For S-0001, "0001" means the serial com- mand alarm input number.)

V-001 to 999: Video loss

(Example: For V-001, "001" means the number of camera to which video loss has occurred)

ALL: Alarm all reset

S : Alarm suspension ON/OFF

• ACTION

POWER: The unit is powered on. (Highlighted: Power off)

M01 to 32: Alarm occurred to Monitor 1 to 32. (For group sequence and group preset, the smallest monitor number is displayed with "".)

C001 to C999: Camera 001 to Camera 999 was activat- ed for spot mode.

69

Image 69
Contents Model Nos. WJ-SX650 Series English Version Important Safety Instructions Contents Disclaimer of Warranty Limitation of LiabilityTrademarks and Registered Trademarks Precautions Preparations pages xx, xx, xx About These Operating InstructionsAuthentication by user IDs, passwords, and level settings FeaturesTimer event and camera event can be scheduled Alarm operation and alarm event can be scheduledFront View WJ-SX650 Matrix Switcher/WJ-SX650U Card CageRear View 1Signal Ground Terminal Signal GNDA-3/IN B-3/IN C-3 board Video Input Board WJ-PB65C32X-2 board IN-3 boardOUT X-3 board Video Output Board WJ-PB65M16OUT X-2 board OUT X-1 boardMonitor Display Information WV-CU950/650 System Controller Display InformationCamera/recorder/sequence number 001 to 999 Camera number WV-CU360C/CJChecking Board Composition InstallationsSwitch Settings for Video Input Main Board Switch Settings for Video Output Main Board Front view of video output main boardHost Func Mounting Video Input and Output Boards Board Mounting Procedure Places to avoid Installing the Main UnitRack Mounting EIA equivalents Products of other manufacturers EIAConnections RecommendedStandards This unit x 1, camera x 30, monitor x 16, and recorder x Basic System ConnectionsThis unit x 3, camera x 150, monitor x 32, and recorder x Expanded System ConnectionsThis unit x 4, camera x 240, monitor x 32, and recorder x Line termination OFF Card Cage ConnectionsCamera Connections RS-485 Camera ConnectionsOFF Connection Daisy Chain ConnectionWV-CA48/JN PC Connection Monitor ConnectionsConnection to Video Output Connectors of Recorders Recorder ConnectionRecorders unit address Camera in channel Video input board Recorder number Unit Address System Video OUTConnection between Recorders and Video Input Boards OFF Recorder Settings Terminal Mode ConnectionSystem Controller Connection Example PS·Data Mode ConnectionExternal Device Connections Alarm Sensor ConnectionsPin No Designation GNDTerminal Duration Remarks System Status CheckDisplay example of System Status MonitorSetup Menu Setup ProcedureRecorder 1 to 10 on Recorder 11 to 16 OFF Data 1, 2, 5 and 6 ports Tmnl Data 3, 4, 7 and 8 ports HDRSetup Menu Installation and Uninstallation WJ-SX650 Series Administrator ConsoleInstallation UninstallationStarting Up User Name admin Password sx650Window Details Tool BarReference No Explanation Tooltip Details2005 to 2099 Year ON, OFF, AUTO, B/W setting Display SystemCamera SequenceAlarm ScheduleOperator Communication ControllerSetup Menu OSD Basic OperationsTop Menu Year Alarm MenuMonth Day TimeRecorder Alarm Terminal Alarm MenuInput Board Data Port Menu System Menu800 bps/9 600 bps/19 200 bps/38 400 bps Data bit 8 bits Parity check None Stop bit 1 bitRS485 Camera Menu VD2/DATA/CABLE Compensation MenuVD2 RS485Information Operator Registration Login and LogoutOperation Start Login Power-on/offOperation Start/End Auto Login/Logout Operation End LogoutMonitor Control Monitor SelectionMonitor Lock Camera Control Preset Position ControlCamera Selection Camera Selection RecallAvailable buttons and functions F1 All home positions All Cameras ControlRecorder Control Recorder Selection Recorder Control EndRunning Sequence Group PresetDescriptions of Sequence Tour SequenceSetting item Parameter Remarks Sequence SettingTour Sequence Group Sequence/PresetSequence Stop Sequence PauseAvailable operations during sequence pause Sequence step forward/backwardAlarm Descriptions Alarm OccurrenceTerminal alarm setting Group Sequence/Preset Alarm ModesVideo Loss SpotAlarm Control Alarm Suspension Return to Alarm Mode StatusAlarm History Display Details on Alarm History DisplayREC Timer Event Timer DescriptionsCamera Event Auto TrackCleaning Alarm in Camera Not UseBW and Scene Patrols Scene PatrolsAlarm recover WV-CU950/650 Terminal Mode OperationLists of Operations and Functions Operation list of WV-CU950/650 and WV-CU360C/CJFunction WV-CU950/650 Function list of WV-CU950/650 and WV-CU360C/CJWV-CU950/650, WV CU360C/CJALL Shift + SetupCAM ID EventShift + ALM ALL Reset Shift + ALL Reset ALM ResetALM Recall ACKCamera control Focus Near Focus FARFocus FAR + Focus NearWiper Recorder control DEF on Shift + DEF on OFF DEF OFF Shift + DEF OFFShift + CAM Func OSD ON/OFF OSD→ Multi Screen Screen SELPause PlayGO to Last StopRecorder + If you press the Menu button without selecting a recorder Menu Flow WV-CU950/650If you select a recorder, and then press the Menu button If you select a recorder, and then press the Search buttonPS·Data Mode Operations Operation Other than Terminal ModeControlling from a Web Browser Accessing a Recorder Controlling from a PCConnections and Operations Alarm event Refer to p Camera Access Refer to p Recorder Access Refer to pGlossary Monitor lock Refer to pPage Matrix Switcher WJ-SX650 Series TroubleshootingRS-485 communication Coaxial communicationProblem Check item and remedy Check if the alarm event has been set WJ-SX650 Series Administrator Console Problem Check item and remedy Reference Power Cord, Connectors, and Power PlugMatrix Switcher WJ-SX650 Series SpecificationsCard Cage WJ-SX650U Video Input Board WJ-PB65C21Video Output Board WJ-PB65M16 Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K Standard AccessoriesSub/BNC Video Cable WJ-CA68 CD-ROMN0805-0 V8QA6300AN