Panasonic WJ-SX650 manual Camera control

Camera control

Function	WV-CU950/650	WV-CU360C/CJ	Note
Programs the preset position.	Enter the number. (Numeric	Enter the number. (Numeric
	buttons)	buttons)
	→ [SHIFT] + [PGM PRESET]	→ [SHIFT] +
		[PROGRAM PRESET]
Moves to the preset position.	Enter the number. (Numeric	Enter the number. (Numeric	WV-CU950/650, WV-
	buttons) → [PRESET]	buttons) → [CALL PRESET]	CU360C/CJ:
			Without numeric entry, the
			camera will move to the home
			position.
Camera setup menu	Open "Camera Setup" menu.		WV-CU950/650, WV-
	→		CU360C/CJ:
			• Refer to p. 36 Operation list
			of WV-CU950/650 and WV-
			CU360C/CJ for setup menu
			operations.
			• Moves the cursor: Joystick
			CDAB
			• To perform the setting of
			panning/tilting, lens iris, lens
			focus, or zooming in the
			setup menu, control the
			camera while holding down
			the SHIFT button.
• Opens the camera setup	[F1]	[SHIFT] + [CAM SETUP]
menu
• Closes the camera setup	[F2]	[SHIFT] + [CAM SETUP]
menu
<In the camera setup menu>	[F3]	[RESET]
• Opens the special menu. /
Resets the camera setting.
• Resets all the camera set-	[F4]	[SHIFT] + [ALL RESET]
tings.
Pan/Tilt control	Joystick CDAB	Joystick CDAB	WV-CU950/650, WV-
			CU360C/CJ:
			The camera will pan and tilt
			according to the direction of
			joystick movement.
Iris control			WV-CU950/650, WV-
• Opens the lens iris.	[IRIS OPEN]	[IRIS OPEN]	CU360C/CJ:
			Lens iris will keep opening up
			while this button is held down.
• Closes the lens iris.	[IRIS CLOSE]	[IRIS CLOSE]	WV-CU950/650, WV-
			CU360C/CJ:
			Lens iris will keep closing
			down while this button is held
			down.
• Resets the lens iris to the	[A]	[IRIS OPEN] + [IRIS CLOSE]	WV-CU950/650:
default status.			You can assign another func-
			tion to this button.
			The setting is performed in
			"Controller" – "Key
			Assignment" of WJ-SX650
			Series Administrator Console.

77