Panasonic WJ-SX650 manual Tooltip Details, Reference No Explanation

Note: Do not edit the setup data files by using text editors, etc. You may become unable to open the setup data files.

■Tooltip Details

When you point the cursor on a button or pull-down menu, a tooltip appears. Tool tips that have additional explana- tions include reference numbers such as "∗1". Refer to the following diagram for these additional explanations.

Reference No.	Explanation
1	1 to 8: Port No.
2	4800 bps, 9600 bps, 19200 bps, 38400 bps: Transmission speed
3	Character entry limit: 20 characters Available characters: Alphanumeric characters and symbols
4	1,2: Level
5	1 to 8: Video input board No.
6	Available parameters: Blank, 1 to 999
7	ON: Use
	OFF: Not use
	Note: ON is not available for recorders when camera input channels are set for RS-485 cameras. To acti-
	vate recorder connections, set "--" for DATA Port and Address in "System" – "RS485 Camera".
8	Available parameters: Blank, 1 to 999
	Note: Select the camera numbers that has been set in "System" – "Logical Camera Number".
9	[DATA1] TMNL1, PSD: Port type
	[DATA1] TMNL2: Port type
	[DATA3] TMNL3, HDR1: Port type
	[DATA4] TMNL4, HDR 2: Port type
	[DATA5] TMNL 5: Port type
	[DATA6] TMNL 6: Port type
	[DATA7] TMNL7, HDR3: Port type
	[DATA8] TMNL8, HDR4: Port type
10	4800 bps, 9600 bps, 19200 bps: Transmission speed
	To change the transmission speed, conform the settings of this unit to that of connected devices.
11	[Input Board 1] 1 to 4: Port number
	[Input Board 2] 5 to 8: Port number
	[Input Board 3] 9 to 12: Port number
	[Input Board 4] 13 to 16: Port number
	[Input Board 5] 17 to 20: Port number
	[Input Board 6] 21 to 24: Port number
	[Input Board 7] 25 to 28: Port number
	[Input Board 8] 29 to 32: Port number
	Note: Port numbers cannot be set for camera channels accepting video input signals from recorders. To
	activate RS-485 camera connections, change the settings in "System" – "Recorder".
12	1 to 8: Camera unit number
	Note: Camera unit address cannot be set for camera channels accepting video input signals from
	recorders. To activate RS-485 camera connections, change the settings in "System" – "Recorder".
13	ON: Overlap
	OFF: Not overlap
14	S: Less than 400 m {1 300 ft}
	M: 400 m {1 300 ft} to 700 m {2 300 ft}
	L: 700 m {2 300 ft} to 900 m {3 000 ft}
	Note: Refer to p. 61 for details on the cable length.

42