Panasonic WJ-SX650 manual Operation Other than Terminal Mode, PS·Data Mode Operations

Page 85

OPERATION (OTHER THAN TERMINAL MODE)

This chapter includes notifications on operations from sys- tem controllers in the PS·Data mode, a web browser accessing the recorder, or a PC.

■PS·Data Mode Operations

Note: When using a system controller in the PS·Data mode, check the software version.

The available software versions are as follows. WV-CU950/650:Ver. 2.00 or later WV-CU360C/CJ:Ver. 8.10 or later

The following is the restrictions of PS·Data mode opera- tions. Refer to the operating instructions of system con- troller for details.

• Login

Log into the system by entering the user ID and password registered in the system controller. After login, you can control the unit as a PS·Data operator. PS·Data operator setting is performed in "Operator" – "Operator" of WJ-SX650 Series Administrator Console.

• Logout

Auto logout is not available. Log out from the system manu- ally.

• Camera selection

When using WV-CU360C/CJ, you cannot select Camera 200 or greater.

• Camera position

When using WV-CU950/650, camera positions registered in the system controller are activated. (Up to 999 camera positions are available.) This function is not available with WV-CU360C/CJ.

• Camera selection recall

Camera selection steps are memorized in the system con- troller. (Even when you select another monitor, the memo- rized steps are not cleared.) This function is not available with WV-CU360C/CJ.

• Preset

When using WV-CU360C/CJ, you cannot select Preset Position 065 or greater.

• Recorder selection

You cannot select a recorder by entering the recorder num- ber. To select the recorder, enter the logical camera num- ber associated with the camera input channel connected to the recorder.

• Recorder control

When using WV-CU360C/CJ, refer to the operating instruc- tions of recorder.

• Alarm

Alarm ACK, alarm individual reset, and alarm monitor reset are not available. (Alarm all reset is available.) When con- trolling Alarm History Display from WV-CU360C/CJ, you cannot skip to 10 pages forward or backward. (Refer to p. 39.)

• Error message display

When you fail in operations, error messages (Not Avail and Prohibited) will not be displayed on the LCD (or LED).

You cannot control the following functions by pressing the associated buttons on system controllers. Control them by entering the system function numbers. (When using WV- CU950/650, you can specify the system functions marked with "*" either by pressing the numeric buttons or recalling the menu functions on the LCD.)

•WV-CU950/650

1.Enter the system function number by pressing the numeric buttons.

2.Press the SYS FUNC*1 (or FUNCTION*2) button while holding down the SHIFT button.

*1 WV-CU950/650 *2 WV-CU360C/CJ

System function

System function number

Monitor lock ON/OFF*

101

 

 

System status display ON/OFF

102

 

 

Time and date information*

104

 

 

Camera information ON/OFF*

105

 

 

Event information*

106

 

 

Monitor status ON/OFF*

107

 

 

All home positions ON/OFF

120

 

 

All auxiliaries ON/OFF

121

 

 

85

Page 84 Page 86
Image 85
Page 84 Page 86
Contents Model Nos. WJ-SX650 Series English Version Important Safety Instructions Contents Limitation of Liability Disclaimer of WarrantyTrademarks and Registered Trademarks Precautions Preparations pages xx, xx, xx About These Operating InstructionsAuthentication by user IDs, passwords, and level settings FeaturesTimer event and camera event can be scheduled Alarm operation and alarm event can be scheduledFront View WJ-SX650 Matrix Switcher/WJ-SX650U Card CageRear View 1Signal Ground Terminal Signal GNDA-3/IN B-3/IN C-3 board Video Input Board WJ-PB65C32X-2 board IN-3 boardOUT X-3 board Video Output Board WJ-PB65M16OUT X-2 board OUT X-1 boardMonitor Display Information WV-CU950/650 System Controller Display InformationCamera/recorder/sequence number 001 to 999 Camera number WV-CU360C/CJChecking Board Composition InstallationsSwitch Settings for Video Input Main Board Front view of video output main board Switch Settings for Video Output Main BoardHost Func Mounting Video Input and Output Boards Board Mounting Procedure Places to avoid Installing the Main UnitRack Mounting EIA equivalents Products of other manufacturers EIARecommended ConnectionsStandards This unit x 1, camera x 30, monitor x 16, and recorder x Basic System ConnectionsThis unit x 3, camera x 150, monitor x 32, and recorder x Expanded System ConnectionsThis unit x 4, camera x 240, monitor x 32, and recorder x Line termination OFF Card Cage ConnectionsRS-485 Camera Connections Camera ConnectionsOFF Daisy Chain Connection ConnectionWV-CA48/JN PC Connection Monitor ConnectionsRecorder Connection Connection to Video Output Connectors of RecordersRecorders unit address Camera in channel Video input board Recorder number Unit Address System Video OUTConnection between Recorders and Video Input Boards OFF Terminal Mode Connection Recorder SettingsSystem Controller Connection Example PS·Data Mode ConnectionExternal Device Connections Alarm Sensor ConnectionsPin No Designation GNDTerminal Duration Remarks System Status CheckDisplay example of System Status MonitorSetup Menu Setup ProcedureRecorder 1 to 10 on Recorder 11 to 16 OFF Data 1, 2, 5 and 6 ports Tmnl Data 3, 4, 7 and 8 ports HDRSetup Menu Installation and Uninstallation WJ-SX650 Series Administrator ConsoleInstallation UninstallationStarting Up User Name admin Password sx650Window Details Tool BarReference No Explanation Tooltip Details2005 to 2099 Year ON, OFF, AUTO, B/W setting Display SystemCamera SequenceSchedule AlarmOperator Communication ControllerBasic Operations Setup Menu OSDTop Menu Year Alarm MenuMonth Day TimeRecorder Alarm Terminal Alarm MenuInput Board Data Port Menu System Menu800 bps/9 600 bps/19 200 bps/38 400 bps Data bit 8 bits Parity check None Stop bit 1 bitRS485 Camera Menu VD2/DATA/CABLE Compensation MenuVD2 RS485Information Operator Registration Login and LogoutOperation Start Login Power-on/offOperation Start/End Auto Login/Logout Operation End LogoutMonitor Selection Monitor ControlMonitor Lock Camera Control Preset Position ControlCamera Selection Camera Selection RecallAvailable buttons and functions F1 All home positions All Cameras ControlRecorder Control Recorder Selection Recorder Control EndRunning Sequence Group PresetDescriptions of Sequence Tour SequenceSetting item Parameter Remarks Sequence SettingTour Sequence Group Sequence/PresetSequence Stop Sequence PauseAvailable operations during sequence pause Sequence step forward/backwardAlarm Occurrence Alarm DescriptionsTerminal alarm setting Group Sequence/Preset Alarm ModesVideo Loss SpotAlarm Control Alarm Suspension Return to Alarm Mode StatusAlarm History Display Details on Alarm History DisplayREC Timer Event Timer DescriptionsCamera Event Auto TrackCleaning Alarm in Camera Not UseBW and Scene Patrols Scene PatrolsAlarm recover WV-CU950/650 Terminal Mode OperationLists of Operations and Functions Operation list of WV-CU950/650 and WV-CU360C/CJFunction WV-CU950/650 Function list of WV-CU950/650 and WV-CU360C/CJWV-CU950/650, WV CU360C/CJALL Shift + SetupCAM ID EventShift + ALM ALL Reset Shift + ALL Reset ALM ResetALM Recall ACKCamera control Focus Near Focus FARFocus FAR + Focus NearWiper DEF on Shift + DEF on OFF DEF OFF Shift + DEF OFF Recorder controlShift + CAM Func OSD ON/OFF OSD→ Multi Screen Screen SELPause PlayGO to Last StopRecorder + If you press the Menu button without selecting a recorder Menu Flow WV-CU950/650If you select a recorder, and then press the Menu button If you select a recorder, and then press the Search buttonPS·Data Mode Operations Operation Other than Terminal ModeControlling from a PC Controlling from a Web Browser Accessing a RecorderConnections and Operations Alarm event Refer to p Camera Access Refer to p Recorder Access Refer to pGlossary Monitor lock Refer to pPage Matrix Switcher WJ-SX650 Series TroubleshootingRS-485 communication Coaxial communicationProblem Check item and remedy Check if the alarm event has been set WJ-SX650 Series Administrator Console Problem Check item and remedy Reference Power Cord, Connectors, and Power PlugMatrix Switcher WJ-SX650 Series SpecificationsVideo Input Board WJ-PB65C21 Card Cage WJ-SX650UVideo Output Board WJ-PB65M16 Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K Standard AccessoriesSub/BNC Video Cable WJ-CA68 CD-ROMN0805-0 V8QA6300AN
Top Page Image Contents