Panasonic WJ-SX650 manual Problem Check item and remedy

Problem

Check item and remedy Reference

• Check the LCD (or LED) display or indicators of system con-

troller. When "Busy (or BUSY)" is blinking (or lighting),17, 18 recorder control is not available.

• Depending on the recorder status, response may be delayed.

Check the status and retry the control.

–

Cannot control a recorder.

"RECORDER ERROR" is dis- played on the monitor, and recorder control is unavail- able.

During sequence, black screen and "NOT ASSIGNED" are displayed on the monitor.

Auxiliary control does not become OFF even after the sequence, timer event, or alarm event ends.

Timer event or camera event is not activated.

• Did you control the recorder on the recorder front panel?
Soon after that, control from system controllers may become	–
unavailable. Wait for a moment and retry the control.

•Check if Monitor 2 is selected with the MONITOR1/MONI- TOR2 button of recorder. (Refer to the operating instructions of recorder for details.)

•As the unit is connected to the MONITOR OUT 2 connector

of recorder, do not select Monitor 1 with the	–
MONITOR1/MONITOR2 button of recorder. When you have
selected Monitor 1, perform an operation that is available for
Monitor 2 only (playback, etc.). Monitor 2 will be selected
automatically.
• Check the connection and settings between the recorder and	63
the unit.
• Check if the recorders version is correct.
WJ-HD300 Series: Ver. 1.61 or later	63
WJ-HD300A Series: Ver. 3.10 or later

• Check if the sequence setting contains LCN's not registered.	26
• If the sequence, timer event, or alarm event has turned on
the auxiliary control, the auxiliary control does not become			23
OFF automatically. Turn off the auxiliary devices manually, or
set an event that turns off the auxiliary control.
• If the timer event or camera event is set to be activated at the
		34, 35, 85
start time of the summer time (daylight saving time), the
event will not be activated.
• If the setting data is uploaded after the start time, the event			34, 35
will not be activated.
• Timer event will not be activated when monitors are selected
by operators with higher priority than the timer event, display-			34
ing SETUP MENU, or being in the alarm mode.

91