Panasonic WJ-SX650 Controlling from a Web Browser Accessing a Recorder, Controlling from a PC

■Connections of Matrix Switchers (WJ-SX650 Series) and a PS·Data System Controller

By setting the DATA ports of matrix switchers to PSD in SETUP MENU (refer to p. 90) and connecting a PS·Data system con- troller (CONTROLLER NO.: 1) to one of the ports, you can control these units from the system controller. (Refer to p. 69 for details on connections.)

By connecting a PS·Data system controller (CONTROLLER NO.: 1) to the DATA ports of the units with Cable Kit WV-CA48/10K, you can control these units from the system controller. (Refer to p. 69 for details on connections.)

Notes:

•Connect Cable Kit to the DATA 1 port.

•Set the DATA 1 port of each unit to PSD. (Refer to p. 90.)

Unit Address: 1 Unit Address: 2 Unit Address: 3

Matrix Switcher WJ-SX 650	Matrix Switcher WJ-SX 650
Matrix Switcher WJ-SX 650

Cable Kit

WV-CA48/10K

A B

1	2	3
4	5	6
7	8	9
	0

CONTROLLER NO.: 1

Connections and Operations

•When controlling two or more units from a PS·Data system controller, you need to select a unit before operation. Refer to WV-CU950/650 Operating Instructions for system unit selection.

•The unit address of each unit must be different from that of system controller. The unit address settings are performed in "Communication" – "PS·Data" of WJ-SX650 Series Administrator Console.

•When an alarm occurs to a unit, other units will accept the alarm as a serial alarm input.

•User level settings for alarm suspension must be the same within all the units. If alarm suspension is restricted in the level setting of a unit, operators with the restricted levels cannot suspend even alarms occurring to other units.

•The LCD settings are performed in "System" – "Logical Camera Number" of WJ-SX650 Series Administrator Console. Up to LCN 999 are available for the settings.

■Controlling from a Web Browser Accessing a Recorder

If a recorder is connected to the unit, you can control cameras using a web browser installed on a PC accessing the recorder. You can set priority for web browser control. Priority setting is performed in "Operator" – "Operator" of WJ-SX650 Series Administrator Console.

Notes:

•Refer to the operating instructions of recorder for details on browser control.

•Regardless of priority setting, during the recorder control from a system controller, camera control is not available from a web browser accessing recorders connected to the same DATA port in the daisy chain.

■Controlling from a PC

You can perform the operations and functions of system controllers by logging into the system and sending RS-232C com- mands from a PC connected to the unit. Refer to Serial (RS-232C) Connector Command Reference (PDF file on the supplied CD-ROM) for available commands.

86