Panasonic AWHE60SE, AWHE60SN manual Selecting the units, Selecting the shooting modes scene files

Page 10

Selecting the units

Up to four units can be operated using one wireless remote control.

Up to five units and devices can be operated using one controller.

Select the unit (or units) to be operated from the wireless remote control or controller.

Even when using only one unit, it must still be selected.

When performing the operations using the wireless remote control

When performing the operations using the controller

When the AWRP655 is connected:

1Press the [1], [2], [3], [4] or [5] button of

[CONTROL/PREVIEW MONITOR OUT SEL].

When the AWRP555 is connected:

1Press the [CAM1], [CAM2], [CAM3] or [CAM4] button.

The unit’s status display lamp blinks green when a signal matched by the remote control ID has been received, and it blinks orange when a signal that is not matched by the remote control ID has been received.

1Press the [1], [2], [3], [4] or [5] button of [CONTROL].

When the AWRP50 is connected:

Refer to the Operating Instructions of the controller.

Selecting the shooting modes (scene files)

wwTypes of shooting modes

This unit has four preset shooting modes, each of which corresponds to a set of circumstances in which the subject will be shot.

Select the mode that satisfies the shooting conditions and suits your preferences.

The settings can be changed by menu operations.

ppThe results of the white balance and other adjustments are stored in the memory separately by shooting mode. Be absolutely sure to select the shooting mode before making any adjustments.

Note

ppIf “FullAuto” has been selected as the setting for Scene on the camera menu, for example, all the auto settings will be turned on, and manual operations will no longer be possible for some of the items.

FullAuto

The shutter speed and lens iris setting are adjusted automatically.

Manual1

The settings of your preferences can be established in line with the shooting scene, lighting and other conditions.

Manual2

The settings of your preferences can be established in line with the shooting scene, lighting and other conditions.

Manual3

The settings of your preferences can be established in line with the shooting scene, lighting and other conditions.

10

Image 10
Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE About copyright and licence Illustrations and screen displays featured in the manualTrademarks and registered trademarks AbbreviationsContents WwOverview Before useWwRequired personal computer environment WwNetwork security WwDisclaimer of warrantyBefore use Usage restrictions英語版 要入手 WwConcerning the plug-in viewer softwareSelect the shooting mode Basic shooting operationsSet the Operate switch on the controller to on How to turn the power on and offWwTurning the power on Pp Power on presetWwTurning the power off How to turn the power on and offSet the Operate switch on the controller to OFF Selecting the shooting modes scene files Selecting the unitsWwTypes of shooting modes WwHow to select the shooting mode Selecting the shooting modes scene filesAW ‑RP655 display AW ‑HE60 scene file Shooting QqUsing the zoom functionQqSwitching the direction or zoom speed QqChanging the camera’s directionMultiple color bands color bars are displayed Lens focus is not adjusted automaticallyUnit does not move Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris Manual shootingWhen 59.94 Hz has been set as the unit’s frequency WwManually adjusting the shutter speedQq How to set the shutter speed using the AW‑RP555 When 50 Hz has been set as the unit’s frequencyPress the OFF, LOW or HI button WwManually adjusting the gainPress the Gain button to turn off its lamp Preset memories Set the memory recording mode Preset memoriesSet to the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected WwWhite balance adjustment White balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the SET button for 2 seconds White balance adjustmentPress the AWC button QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Press the M/IRIS button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the IRIS - buttonBlack level master pedestal adjustment Press the Iris button several times to turn off its lampWwGenlock adjustment Genlock adjustment AW‑HE60S onlyQqHorizontal phase adjustment QqColor phase adjustment Genlock adjustment AW‑HE60S onlyPress the Mode button Genlock adjustment AW‑HE60S only Basic operations Table of operationsBasic operations Previous menuPress the  or  button to change the setting Jog dial L Jog dial mainJog dial R QqProcedure for camera menu operation AW‑RP655 Press the Menu button to exit the camera menuMode button lights up at the BAR setting Press the Item button QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Menu button for 2 seconds to exit the camera menuQqProcedure for camera menu operation AW‑RP50 Camera OSDCamera menu items WwSetting the camera menu itemsWwTop Menu screen WwCamera screen When Manual1 to 3 is selected WwCamera screen When FullAuto is selectedCamera menu items WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwSystem screen WwGenlock screen AW‑HE60S onlySqueeze Down CONV. Mode Squeeze, SideCut, LetterBoxWwOutput screen SideCutFormat Set screen QqChanging the formatFormat change check screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwMaintenance screen WwFirmware Version screenQqConcerning initialization Default GatewayWwIP Network screen IP AddressFactory setting Menu Selection items FullAuto Manual1 Camera menu item tableCamera menu item table RGB‑NOR, RGB‑ENHControls and settings from web screen Operating system installed Web browser Controls and settings from web screenWwDisplaying the web screen using a personal computer Start the web browser of the personal computerControls and settings from web screen  Image Capture Size button Image Capture Size WwLive screen Single display mode Multi-Screen list box Multi-screen  Compression button Compression Camera button / Color bar button CAM/BAR  Power ON button / Standby button OSD Menu Operation  Operation lock button Op.Lock Main area IP video display area  Focus  Preset Zoom  Control pad and its buttons SnapShot  Full-screen displayWwLive screen Multi display mode WwSetup screen QqBasic screenCamera title 0 to 20 half-size characters Automatic installation of viewer software On, Off Basic button  Camera title display areaQqImage screen IP video settings Video over IP Video over IP Monitoring mode 16 9 resizeImage capture size QVGA, VGA Jpeg image settingsImage settings Transmission On, OffImage capture size QVGA, VGA Initial setting VGA Refresh intervalMulticast port 1024 to 50000 Only even numbers can be set Multicast address Setting range 224.0.0.0 toMulticast TTL/HOPLimit 1 to Image  Image Image adjust Preset positionImage adjust screen 仕向地による違い Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBColor Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Speed With Zoom POS  Focus ADJ With PTZ Preset Setting Preset Speed 1 to  Limitation Setting Genlock AW‑HE60S only Horizontal Phase -206 to +49 System screen Output  Frequency 59.94Hz, 50Hz Other Images for which this setting is established QqMulti-screen Multi-screen setup  IP address To 128 half-size characters Camera title To 20 half-size characters QqUser mng Host auth. screen  Host auth  Access level  Host check Priority stream Activation Priority streamStream type QqServer QqNetwork Network screen  IP networkDNS Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68 System name 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  Location 0 to 32 half-size charactersSystem log screen QqMaintenance Error description  Time & date MAC address Product info. screen Model no  Serial no Viewer software installation counter  Status Reset to the default Except the network settings Default reset screen Reboot  Download Back up screen Upload WpDisplaying the web screen using a mobile terminal  Pan/Tilt Resolution switching  Iris  Camera menu OSD menu operation  Tally lamp lighting status displaysCategory Display Description of error NTP-related error displaysLogin-related displays System log displaysLimiters WwBasic limiter operations Setting/releasing the limitersWwSetting the limiters Press the Menu buttonWwReleasing the limiters Setting/releasing the limitersWwResetting the limiters Pp Releasing the upper limit position of the movement rangeWwConcerning the safe mode Safe modeTrouble-triggered safe mode WwSystem requirements for a personal computer WwTrademarks and Registered TrademarksSymptom WwPrecautions when using WindowsSolution 英語版必要 QqRestrictions 108109 Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsIndex XxA XxFIndex XxN XxTMemo Web Site http//panasonic.net Panasonic Corporation