Panasonic AWHE60HN, AWHE60SN, AWHE60SE manual Genlock adjustment AW‑HE60S only, WwGenlock adjustment

Page 29

Genlock adjustment (AW‑HE60S only)

wwGenlock adjustment

The genlock adjustment is performed to achieve phase alignment by applying external synchronization (genlock) when a multiple number of cameras will be used or when the unit will be used in combination with other devices.

This unit supports the BBS signal as the genlock signal. Ask your dealer to perform this adjustment.

(Use a dual-trace oscilloscope for the adjustment.)

(The genlock function is not available with the AW‑HE60H.)

qqHorizontal phase adjustment

Observe the waveforms of the external sync signal input (black burst signal) and video signal output on the dual‑trace oscilloscope, and use the wireless remote control or controller to bring the horizontal phase into alignment.

External sync signal input (black burst signal)

Video signal output

Bring the horizontal phase into alignment.

When performing the operations using the wireless remote control

1Follow the operation steps in “Basic operations” (page 34) to display the Top Menu.

2Press the [] or [] button to bring the cursor to “System”.

Top	Menu
Camera	Scene: FullAuto
System

Maintenance

3Press the [] button.

The “System” sub‑menu is displayed.

System

Genlock

Output

Other

Return

4Press the [] or [] button to bring the cursor to “Genlock”, and press the [] button.

The “Genlock” sub‑menu is displayed.

Genlock
Horizontal	Phase	0
Subcarrier	Phase
Coarse		90°
Fine		0
H Phase.SC	Fine Step	1

Return

5Press the [] or [] button to bring the cursor to “Horizontal Phase”, and press the [] button.

The “Horizontal Phase” value starts blinking.

6Press the [] or [] button to change the “Horizontal Phase” value, adjust the value so that the horizontal phase is brought into alignment, and press the [] button.

7Press the [MENU] button for 2 seconds.

The camera menu display is exited.

When performing the operations using the controller

These operations can be performed using the camera menus by following the operation steps in “Basic operations” (pages 32 to 39).

29

Image 29

Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Trademarks and registered trademarks Illustrations and screen displays featured in the manualAbout copyright and licence AbbreviationsContents WwRequired personal computer environment Before useWwOverview Before use WwDisclaimer of warrantyWwNetwork security Usage restrictionsWwConcerning the plug-in viewer software 英語版要入手Basic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on Pp Power on presetSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisQq How to set the shutter speed using the AW‑RP555 WwManually adjusting the shutter speedWhen 59.94 Hz has been set as the unit’s frequency When 50 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Set to the memory recording mode Preset memoriesSet the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Item button Press the Menu button for 2 seconds to exit the camera menuCamera OSD QqProcedure for camera menu operation AW‑RP50WwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenWwOutput screen Down CONV. Mode Squeeze, SideCut, LetterBoxSqueeze SideCutFormat change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenWwIP Network screen Default GatewayQqConcerning initialization IP AddressCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen WwDisplaying the web screen using a personal computer Controls and settings from web screenOperating system installed Web browser Start the web browser of the personal computerControls and settings from web screen  Multi-Screen list box Multi-screen WwLive screen Single display mode Image Capture Size button Image Capture Size  Compression button Compression OSD Menu Operation  Power ON button / Standby button Camera button / Color bar button CAM/BAR  Operation lock button Op.Lock Main area IP video display area  Zoom  Preset Focus  Control pad and its buttons Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Basic button Automatic installation of viewer software On, OffCamera title 0 to 20 half-size characters  Camera title display area Video over IP Monitoring mode IP video settings Video over IPQqImage screen 16 9 resizeImage settings Jpeg image settingsImage capture size QVGA, VGA Transmission On, OffRefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng  Host check Host auth. screen  Host auth  Access levelStream type Priority stream Priority stream Activation QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Community 0 to 32 half-size characters Snmp screen System name 0 to 32 half-size characters  Location 0 to 32 half-size characters Error description QqMaintenanceSystem log screen  Time & date Model no Product info. screen MAC address  Serial no Status  Viewer software installation counter Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationLogin-related displays NTP-related error displaysCategory Display Description of error System log displaysLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press the Menu buttonWwResetting the limiters Setting/releasing the limitersWwReleasing the limiters Pp Releasing the upper limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerSolution WwPrecautions when using WindowsSymptom 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation