Panasonic AWHE60SE, AWHE60SN, AWHE60HN, AWHE60HE manual  Priority stream Activation, Stream type

Page 86

Controls and settings from web screen (continued)

Priority stream

Selected on this screen are the settings for the priority stream which enables the images to be sent with no reduction in image quality or image refresh speed even when a multiple number of users are accessing the unit at the same time.

Priority stream

Activation

<Initial setting: Off>

Whether to use priority stream transmission is set here using “On” or “Off.”

Stream type

<Initial setting: JPEG>

JPEG or H.264 is set as the stream type here.

JPEG

JPEG images are sent.

H.264 H.264 images are sent.

Note

ppIf “On” has been selected as the priority stream “Activation” setting, the number of users who are allowed access may be limited.

Destination IP address(1) <Initial setting: blank>

The IP address of the first send destination is input here.

Destination IP address(2) <Initial setting: blank>

The IP address of the second send destination is input here.

Refresh interval*

[1fps, 2fps, 3fps, 5fps, 6fps, 10fps, 15fps*, 30fps*]

<Initial setting: 1fps>

The speed at which the images are to be refreshed is set here. This setting takes effect only when “JPEG” has been selected as the “Stream type” setting.

Note

ppWhen “On” is selected as the “H.264 transmission” (page 67) and a value with an asterisk (*) is selected, the image refresh interval may become longer than the value which is set.

Image capture size [QVGA, VGA] <Initial setting: VGA>

QVGA or VGA is selected here as the image resolution. This setting takes effect only when “JPEG” has been selected as the “Stream type” setting.

86

Image 86
Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE About copyright and licence Illustrations and screen displays featured in the manualTrademarks and registered trademarks AbbreviationsContents WwRequired personal computer environment Before useWwOverview WwNetwork security WwDisclaimer of warrantyBefore use Usage restrictions英語版 要入手 WwConcerning the plug-in viewer softwareSelect the shooting mode Basic shooting operationsSet the Operate switch on the controller to on How to turn the power on and offWwTurning the power on Pp Power on presetSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files WwHow to select the shooting mode Selecting the shooting modes scene filesAW ‑RP655 display AW ‑HE60 scene file Shooting QqUsing the zoom functionQqSwitching the direction or zoom speed QqChanging the camera’s directionMultiple color bands color bars are displayed Lens focus is not adjusted automaticallyUnit does not move Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris Manual shootingWhen 59.94 Hz has been set as the unit’s frequency WwManually adjusting the shutter speedQq How to set the shutter speed using the AW‑RP555 When 50 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Set the memory recording mode Preset memoriesSet to the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Press the M/IRIS button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the IRIS - buttonBlack level master pedestal adjustment Press the Iris button several times to turn off its lampQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Basic operations Table of operationsBasic operations Previous menuPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L QqProcedure for camera menu operation AW‑RP655 Press the Menu button to exit the camera menuMode button lights up at the BAR setting Press the Item button QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Menu button for 2 seconds to exit the camera menuQqProcedure for camera menu operation AW‑RP50 Camera OSDWwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwSystem screen WwGenlock screen AW‑HE60S onlySqueeze Down CONV. Mode Squeeze, SideCut, LetterBoxWwOutput screen SideCutFormat Set screen QqChanging the formatFormat change check screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwMaintenance screen WwFirmware Version screenQqConcerning initialization Default GatewayWwIP Network screen IP AddressFactory setting Menu Selection items FullAuto Manual1 Camera menu item tableCamera menu item table RGB‑NOR, RGB‑ENHControls and settings from web screen Operating system installed Web browser Controls and settings from web screenWwDisplaying the web screen using a personal computer Start the web browser of the personal computerControls and settings from web screen  Image Capture Size button Image Capture Size WwLive screen Single display mode Multi-Screen list box Multi-screen  Compression button Compression Camera button / Color bar button CAM/BAR  Power ON button / Standby button OSD Menu Operation  Operation lock button Op.Lock Main area IP video display area  Focus  Preset Zoom  Control pad and its buttons SnapShot  Full-screen displayWwLive screen Multi display mode WwSetup screen QqBasic screenCamera title 0 to 20 half-size characters Automatic installation of viewer software On, Off Basic button  Camera title display areaQqImage screen IP video settings Video over IP Video over IP Monitoring mode 16 9 resizeImage capture size QVGA, VGA Jpeg image settingsImage settings Transmission On, OffImage capture size QVGA, VGA Initial setting VGA Refresh intervalMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Image  Image Image adjust Preset positionImage adjust screen 仕向地による違い Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBColor Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Speed With Zoom POS  Focus ADJ With PTZ Preset Setting Preset Speed 1 to  Limitation Setting Genlock AW‑HE60S only Horizontal Phase -206 to +49 System screen Output  Frequency 59.94Hz, 50Hz Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng Host auth. screen  Host auth  Access level  Host checkStream type Priority stream Priority stream Activation QqServer QqNetwork Network screen  IP networkDNS Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68 System name 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  Location 0 to 32 half-size charactersSystem log screen QqMaintenance Error description  Time & date MAC address Product info. screen Model no  Serial no Viewer software installation counter  Status Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download WpDisplaying the web screen using a mobile terminal  Pan/Tilt Resolution switching  Iris  Camera menu OSD menu operation  Tally lamp lighting status displaysCategory Display Description of error NTP-related error displaysLogin-related displays System log displaysLimiters WwBasic limiter operations Setting/releasing the limitersWwSetting the limiters Press the Menu buttonWwReleasing the limiters Setting/releasing the limitersWwResetting the limiters Pp Releasing the upper limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwSystem requirements for a personal computer WwTrademarks and Registered TrademarksSolution WwPrecautions when using WindowsSymptom 英語版必要 QqRestrictions 108109 Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsIndex XxA XxFIndex XxN XxTMemo Web Site http//panasonic.net Panasonic Corporation