Panasonic AWHE60HE, AWHE60SN, AWHE60HN, AWHE60SE manual Jog dial main, Jog dial L, Jog dial R

Page 35

Basic operations (continued)

wwControl exercised from the Multi-Function Controller AWRP655

Each time the [MODE] button is pressed, the setting is switched between CAM and BAR. The [MODE] button lights up at the BAR setting.

This is used to switch between AUTO and MANU for the gain. The [GAIN] button lights when the AUTO setting is selected.

For switching WHITE BAL A,

B or ATW.

For executing AWB.

*1, *2

Jog dial (main)

When the LCD is in the gain adjustment mode ([GAIN] button: MANU)

Select the desired gain setting from GAIN 0 dB to 18 dB. *5

When the LCD is in the gain adjustment mode ([GAIN] button: AUTO)

Select the desired gain setting from AGC MAX GAIN 6 dB, 12 dB or 18 dB.

When the LCD is in the pedestal adjustment mode

Adjust the PEDESTAL TOTAL setting (–150 to +150). *6

When the camera menu mode is established

Perform the camera menu operations.

Each time the [EXT(AF)] button is pressed,

the focus setting is switched between auto focus and manual focus. When auto focus is selected, the [EXT(AF)] button lights.

When the focus setting is switched between auto focusing and manual focusing by the camera, the resulting status (lamp on or off) will not be reflected in the button.

The unit does not have an ABC function.

This is used to acquire the

 

Jog dial (L)

 

When the LCD is in the gain

statuses of the camera and

 

 

adjustment mode

synchronize the data. *3

 

 

Adjust the R GAIN setting (–150 to

 

 

 

 

 

+150). *4, *7

These are used for menu operation.

Jog dial (R)

When the LCD is in the camera menu mode

Press the jog dial (R) to cancel the setting change.

When the LCD is in the gain adjustment mode

Adjust the B GAIN setting (–150 to +150). *4, *7

This is used to switch between the Day mode and Night mode.

For selecting the cameras to be operated.

*1:

The AWC switch indicator blinks while the white

*5:

With this unit, the gain setting is reflected in

 

balance is being adjusted.

 

increments of 3 dB in the control.

 

When AWB is completed successfully, the lamp

*6:

With this unit, the setting is reflected in increments

 

goes off; when it is not completed successfully, it

 

of 15 dB in the control.

 

lights up.

 

On the camera menu, the setting is adjusted in

*2:

The switch lights without AWB being executed when

 

range from –10 to +10.

 

the white balance mode of the main unit is ATW, or

*7:

With this unit, the setting is reflected in increments

 

when the Color Bar is being displayed.

 

of 5 dB in the control.

*3:

SCENE FILE, CAM/BAR, and GAINUP of each

 

On the camera menu, the setting is adjusted in

 

SCENE, as well as the W/B MODE statuses are

 

range from –30 to +30.

 

synchronized.

 

 

*4: The R gain and B gain cannot be adjusted if ATW is used as the White Balance Mode setting.

35

Image 35
Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Abbreviations Illustrations and screen displays featured in the manualTrademarks and registered trademarks About copyright and licenceContents WwRequired personal computer environment Before useWwOverview Usage restrictions WwDisclaimer of warrantyBefore use WwNetwork securityWwConcerning the plug-in viewer software 英語版 要入手Basic shooting operations Select the shooting modePp Power on preset How to turn the power on and offWwTurning the power on Set the Operate switch on the controller to onSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqChanging the camera’s direction QqUsing the zoom functionQqSwitching the direction or zoom speed ShootingMenu screen is displayed Lens focus is not adjusted automaticallyUnit does not move Multiple color bands color bars are displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisWhen 50 Hz has been set as the unit’s frequency WwManually adjusting the shutter speedQq How to set the shutter speed using the AW‑RP555 When 59.94 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Hold down the Reset button Preset memoriesSet to the memory recording mode Set the memory recording modeWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Press the IRIS - button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the M/IRIS buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Item buttonCamera OSD QqProcedure for camera menu operation AW‑RP50WwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenSideCut Down CONV. Mode Squeeze, SideCut, LetterBoxWwOutput screen SqueezeFormat unchanged screen QqChanging the formatFormat change check screen Format Set screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenIP Address Default GatewayWwIP Network screen QqConcerning initializationCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen Start the web browser of the personal computer Controls and settings from web screenWwDisplaying the web screen using a personal computer Operating system installed Web browserControls and settings from web screen  Compression button Compression WwLive screen Single display mode Multi-Screen list box Multi-screen  Image Capture Size button Image Capture Size Operation lock button Op.Lock  Power ON button / Standby button OSD Menu Operation  Camera button / Color bar button CAM/BAR Main area IP video display area  Control pad and its buttons  Preset Zoom  Focus Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Camera title display area Automatic installation of viewer software On, Off Basic button Camera title 0 to 20 half-size characters16 9 resize IP video settings Video over IP Video over IP Monitoring mode QqImage screenTransmission On, Off Jpeg image settingsImage settings Image capture size QVGA, VGARefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng  Host check Host auth. screen  Host auth  Access levelStream type Priority stream Priority stream Activation QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Location 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  System name 0 to 32 half-size characters Time & date QqMaintenance Error description System log screen Serial no Product info. screen Model no  MAC address Status  Viewer software installation counter Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationSystem log displays NTP-related error displaysLogin-related displays Category Display Description of errorLimiters Press the Menu button Setting/releasing the limitersWwSetting the limiters WwBasic limiter operationsPp Releasing the upper limit position of the movement range Setting/releasing the limitersWwResetting the limiters WwReleasing the limitersTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerSolution WwPrecautions when using WindowsSymptom 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation