Panasonic AWHE60HE, AWHE60SN manual WwOutput screen, Down CONV. Mode Squeeze, SideCut, LetterBox

Page 47

Camera menu items (continued)

wwOutput screen

 

Output

 

Format

1080i

Down

CONV. Mode LetterBox

HDMI

Color

YCbCr422

Return

Format

[1080/59.94p, 1080/59.94i, 720/59.94p, 480/59.94p, 480/59.94i, 1080/29.97PsF, 1080/50p, 1080/50i, 720/50p, 576/50p, 576/50i, 1080/25PsF]

The video format is changed on this screen.

The formats of the images which can be output differ between the AWHE60H and AWHE60S.

For details on how to change the format, refer to “Changing the format” (page 48).

Down CONV. Mode

[Squeeze, SideCut, LetterBox]

The down-conversion mode is selected here.

HDMI Color (AWHE60H only)

[RGB-NOR, RGB-ENH, YCbCr422, YCbCr444]

Set here is the HDMI color output.

When an HDMI monitor is used, use “YCbCr422” under normal circumstances.

In cases where, for instance, HDMI (RGB) signals are converted and output to a DVI monitor, the settings required will differ depending on the color gradation supported by the monitor.

RGB-NOR

The RGB output signals are output in the

 

16 to 235 range.

 

 

RGB-ENH

The RGB output signals are output in the

 

0 to 255 range.

If the black parts of the images appear overexposed when “RGB-NOR” has been selected, use the “RGB-ENH” setting instead.

Conversely, if the images are displayed with a loss of dark detail when “RGB-ENH” has been selected, use the “RGB-NOR” setting instead.

Note

ppIf an HDMI Color setting which is not supported by the monitor has been specified, the HDMI Color setting may be changed automatically.

(The menu display will remain unchanged.)

With the AWHE60S, this item cannot be selected.

Squeeze

When the 4:3 aspect ratio has been set for the monitor screen, the images are squeezed horizontally and extended vertically changing the view of the angle.

Return

Use this to return to the previous menu.

SideCut

With the vertical height serving as the reference, the parts which extend beyond this at the two sides are cropped changing the view of the angle.

LetterBox

With the horizontal width serving as the reference, black bands are added at the top and bottom changing the view of the angle.

ppWhen output is selected for the color bar, the mode is fixed to Squeeze.

If “SideCut” or “LetterBox” has been selected, the images will not appear for a few seconds when the color bar display is set to ON or OFF.

47

Image 47
Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Abbreviations Illustrations and screen displays featured in the manualTrademarks and registered trademarks About copyright and licenceContents WwRequired personal computer environment Before useWwOverview Usage restrictions WwDisclaimer of warrantyBefore use WwNetwork securityWwConcerning the plug-in viewer software 英語版 要入手Basic shooting operations Select the shooting modePp Power on preset How to turn the power on and offWwTurning the power on Set the Operate switch on the controller to onSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqChanging the camera’s direction QqUsing the zoom functionQqSwitching the direction or zoom speed ShootingMenu screen is displayed Lens focus is not adjusted automaticallyUnit does not move Multiple color bands color bars are displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisWhen 50 Hz has been set as the unit’s frequency WwManually adjusting the shutter speedQq How to set the shutter speed using the AW‑RP555 When 59.94 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Hold down the Reset button Preset memoriesSet to the memory recording mode Set the memory recording modeWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Press the IRIS - button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the M/IRIS buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Item buttonCamera OSD QqProcedure for camera menu operation AW‑RP50WwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenSideCut Down CONV. Mode Squeeze, SideCut, LetterBoxWwOutput screen SqueezeFormat unchanged screen QqChanging the formatFormat change check screen Format Set screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenIP Address Default GatewayWwIP Network screen QqConcerning initializationCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen Start the web browser of the personal computer Controls and settings from web screenWwDisplaying the web screen using a personal computer Operating system installed Web browserControls and settings from web screen  Compression button Compression WwLive screen Single display mode Multi-Screen list box Multi-screen  Image Capture Size button Image Capture Size Operation lock button Op.Lock  Power ON button / Standby button OSD Menu Operation  Camera button / Color bar button CAM/BAR Main area IP video display area  Control pad and its buttons  Preset Zoom  Focus Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Camera title display area Automatic installation of viewer software On, Off Basic button Camera title 0 to 20 half-size characters16 9 resize IP video settings Video over IP Video over IP Monitoring mode QqImage screenTransmission On, Off Jpeg image settingsImage settings Image capture size QVGA, VGARefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng  Host check Host auth. screen  Host auth  Access levelStream type Priority stream Priority stream Activation QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Location 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  System name 0 to 32 half-size characters Time & date QqMaintenance Error description System log screen Serial no Product info. screen Model no  MAC address Status  Viewer software installation counter Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationSystem log displays NTP-related error displaysLogin-related displays Category Display Description of errorLimiters Press the Menu button Setting/releasing the limitersWwSetting the limiters WwBasic limiter operationsPp Releasing the upper limit position of the movement range Setting/releasing the limitersWwResetting the limiters WwReleasing the limitersTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerSolution WwPrecautions when using WindowsSymptom 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation