Panasonic AWHE60HE, AWHE60SN manual Black level master pedestal adjustment, Press the M/IRIS button

Page 27

Black level (master pedestal) adjustment

wwBlack level (master pedestal) adjustment

The black level can be adjusted when using a multiple number of cameras including the unit. Ask your dealer to perform this adjustment.

(Use an oscilloscope or waveform monitor for the adjustment.)

Adjust the black level in accordance with the units and devices used.

The black level can be adjusted only when Manual1, Manual2 or Manual3 is selected as the shooting mode (scene file).

When performing the operations using the wireless remote control

1Press the [M/IRIS] button.

Set the iris to the manual mode.

2Press the [IRIS –] button.

The lens iris is stopped down.

3Select Manual1, Manual2 or Manual3 by following the procedure in “How to select the shooting mode” (page 11) under “Selecting the shooting modes (scene files)”.

4Press the [] or [] button to bring the cursor to “Picture”.

5Press the [] button.

The “Picture 1/2” sub‑menu is displayed.

	Picture	1/2
Chroma Level			0
AWB	Mode		AWB A
R	Gain		0
B	Gain		0
Detail			High
Flesh Tone		Mode	Off
DNR			High

Return

6Press the [] or [] button to move to the “Picture 2/2” sub-menu, and bring the cursor to “Pedestal”.

Picture		2/2
Pedestal			0
DRS			Off
Gamma	Type		Normal
Gamma	Level		Mid
Back Light		COMP.	Off
Day/Night			Day

Return

7Press the [] button to start the “Pedestal” value blinking.

8Press the [] or [] button, change the “Pedestal” value, and press the [] button to enter the selection.

Adjust the black level to a value of approx. 0.035 V.

9Press the [MENU] button for 2 seconds.

The camera menu display is exited.

10 If necessary, press the [A/IRIS] button to adjust the iris automatically.

27

Image 27

Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Abbreviations Illustrations and screen displays featured in the manualTrademarks and registered trademarks About copyright and licenceContents Before use WwOverviewWwRequired personal computer environment Usage restrictions WwDisclaimer of warrantyBefore use WwNetwork securityWwConcerning the plug-in viewer software 英語版要入手Basic shooting operations Select the shooting modePp Power on preset How to turn the power on and offWwTurning the power on Set the Operate switch on the controller to onHow to turn the power on and off WwTurning the power offSet the Operate switch on the controller to OFF Selecting the units Selecting the shooting modes scene filesWwTypes of shooting modes Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqChanging the camera’s direction QqUsing the zoom functionQqSwitching the direction or zoom speed ShootingMenu screen is displayed Lens focus is not adjusted automaticallyUnit does not move Multiple color bands color bars are displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisWhen 50 Hz has been set as the unit’s frequency WwManually adjusting the shutter speedQq How to set the shutter speed using the AW‑RP555 When 59.94 Hz has been set as the unit’s frequencyWwManually adjusting the gain Press the OFF, LOW or HI buttonPress the Gain button to turn off its lamp Preset memories Hold down the Reset button Preset memoriesSet to the memory recording mode Set the memory recording modeWhen the AW‑RP555 is connected White balance adjustment WwWhite balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B White balance adjustment Press the SET button for 2 secondsPress the AWC button QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Press the IRIS - button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the M/IRIS buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentGenlock adjustment AW‑HE60S only WwGenlock adjustmentQqHorizontal phase adjustment Genlock adjustment AW‑HE60S only QqColor phase adjustmentPress the Mode button Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial main Jog dial LJog dial R Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Press the Menu button for 2 seconds to exit the camera menu QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Item buttonCamera OSD QqProcedure for camera menu operation AW‑RP50WwSetting the camera menu items Camera menu itemsWwTop Menu screen WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedCamera menu items WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenSideCut Down CONV. Mode Squeeze, SideCut, LetterBoxWwOutput screen SqueezeFormat unchanged screen QqChanging the formatFormat change check screen Format Set screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenIP Address Default GatewayWwIP Network screen QqConcerning initializationCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen Start the web browser of the personal computer Controls and settings from web screenWwDisplaying the web screen using a personal computer Operating system installed Web browserControls and settings from web screen  Compression button Compression WwLive screen Single display mode Multi-Screen list box Multi-screen  Image Capture Size button Image Capture Size Operation lock button Op.Lock  Power ON button / Standby button OSD Menu Operation  Camera button / Color bar button CAM/BAR Main area IP video display area  Control pad and its buttons  Preset Zoom  Focus Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Camera title display area Automatic installation of viewer software On, Off Basic button Camera title 0 to 20 half-size characters16 9 resize IP video settings Video over IP Video over IP Monitoring mode QqImage screenTransmission On, Off Jpeg image settingsImage settings Image capture size QVGA, VGARefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast address Setting range 224.0.0.0 to Multicast port 1024 to 50000 Only even numbers can be setMulticast TTL/HOPLimit 1 to Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established Multi-screen setup  IP address To 128 half-size characters QqMulti-screen Camera title To 20 half-size characters QqUser mng  Host check Host auth. screen  Host auth  Access levelPriority stream  Priority stream ActivationStream type QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Location 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  System name 0 to 32 half-size characters Time & date QqMaintenance Error description System log screen Serial no Product info. screen Model no  MAC address Status  Viewer software installation counterDefault reset screen  Reset to the default Except the network settings Reboot Back up screen  Download Upload  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationSystem log displays NTP-related error displaysLogin-related displays Category Display Description of errorLimiters Press the Menu button Setting/releasing the limitersWwSetting the limiters WwBasic limiter operationsPp Releasing the upper limit position of the movement range Setting/releasing the limitersWwResetting the limiters WwReleasing the limitersSafe mode WwConcerning the safe modeTrouble-triggered safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerWwPrecautions when using Windows SymptomSolution 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation