Panasonic AWHE60HN, AWHE60SN, AWHE60SE, AWHE60HE  Viewer software installation counter,  Status

Page 93

Controls and settings from web screen (continued)

Viewer software installation counter

The number of plug-in viewer software applications which have been installed automatically from the unit is displayed by this counter.

Firmware file

1After consulting with your dealer, download the latest software to the hard disk of your personal computer.

Notes

ppNo spaces or full-size characters can be used for

the directory in which the software will be stored.

ppKeep the maximum combined number of characters to be used for the name of the directory in which the software will be stored and for the name of the software which has been downloaded to less than 250 characters.

2Click the Browse button, and specify the downloaded software.

3Click the Execute button.

The software upgrade check screen is displayed.

After upgrading the software version, be absolutely sure to delete the temporary Internet files.

Note

ppBe absolutely sure to upgrade the software versions from the personal computer in the same network (LAN) as the unit whose firmware version is to be updated.

Status

The current status of the unit is displayed here.

Notes

ppAfter the Execute button has been pressed, it will take about one minute with the Camera Main software or about 3 minutes with the Network software for the progress bar that indicates the progress made in the version upgrading to appear.

ppUse the personal computer on the same subnet as the camera to upgrade the software version.

ppBefore using the version upgrading software, be absolutely sure to check the precautions to be observed with your dealer, and follow the dealer’s instructions.

ppUse the following files specified by Panasonic Corporation as the software used for version upgrading.

Camera Main	bin files

Network	img files

EEPROM	eep files

ppBe absolutely sure to write the filenames as below (see *) for the files of the software used for version upgrading.

Camera Main	he60_cameramain_xxxxx.bin*

Network	he60_network_xxxxx.img*

EEPROM	he60_cam_eepxxxxx.eep*

*: Enter the software version in the “xxxxx” part.

ppDo not turn off the unit’s power while a software version is being upgraded.

(Do not turn off the power until the progress bar display is cleared.)

ppWhile a software version is being upgraded, do not attempt to execute any other operations until the version has been upgraded.

93

Image 93

Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Trademarks and registered trademarks Illustrations and screen displays featured in the manualAbout copyright and licence AbbreviationsContents Before use WwOverviewWwRequired personal computer environment Before use WwDisclaimer of warrantyWwNetwork security Usage restrictionsWwConcerning the plug-in viewer software 英語版要入手Basic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on Pp Power on presetHow to turn the power on and off WwTurning the power offSet the Operate switch on the controller to OFF Selecting the units Selecting the shooting modes scene filesWwTypes of shooting modes Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisQq How to set the shutter speed using the AW‑RP555 WwManually adjusting the shutter speedWhen 59.94 Hz has been set as the unit’s frequency When 50 Hz has been set as the unit’s frequencyWwManually adjusting the gain Press the OFF, LOW or HI buttonPress the Gain button to turn off its lamp Preset memories Set to the memory recording mode Preset memoriesSet the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected White balance adjustment WwWhite balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B White balance adjustment Press the SET button for 2 secondsPress the AWC button QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentGenlock adjustment AW‑HE60S only WwGenlock adjustmentQqHorizontal phase adjustment Genlock adjustment AW‑HE60S only QqColor phase adjustmentPress the Mode button Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial main Jog dial LJog dial R Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Item button Press the Menu button for 2 seconds to exit the camera menuCamera OSD QqProcedure for camera menu operation AW‑RP50WwSetting the camera menu items Camera menu itemsWwTop Menu screen WwCamera screen When FullAuto is selected WwCamera screen When Manual1 to 3 is selectedCamera menu items WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenWwOutput screen Down CONV. Mode Squeeze, SideCut, LetterBoxSqueeze SideCutFormat change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenWwIP Network screen Default GatewayQqConcerning initialization IP AddressCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen WwDisplaying the web screen using a personal computer Controls and settings from web screenOperating system installed Web browser Start the web browser of the personal computerControls and settings from web screen  Multi-Screen list box Multi-screen WwLive screen Single display mode Image Capture Size button Image Capture Size  Compression button Compression OSD Menu Operation  Power ON button / Standby button Camera button / Color bar button CAM/BAR  Operation lock button Op.Lock Main area IP video display area  Zoom  Preset Focus  Control pad and its buttons Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Basic button Automatic installation of viewer software On, OffCamera title 0 to 20 half-size characters  Camera title display area Video over IP Monitoring mode IP video settings Video over IPQqImage screen 16 9 resizeImage settings Jpeg image settingsImage capture size QVGA, VGA Transmission On, OffRefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast address Setting range 224.0.0.0 to Multicast port 1024 to 50000 Only even numbers can be setMulticast TTL/HOPLimit 1 to Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established Multi-screen setup  IP address To 128 half-size characters QqMulti-screen Camera title To 20 half-size characters QqUser mng  Host check Host auth. screen  Host auth  Access levelPriority stream  Priority stream ActivationStream type QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Community 0 to 32 half-size characters Snmp screen System name 0 to 32 half-size characters  Location 0 to 32 half-size characters Error description QqMaintenanceSystem log screen  Time & date Model no Product info. screen MAC address  Serial no Status  Viewer software installation counterDefault reset screen  Reset to the default Except the network settings Reboot Back up screen  Download Upload  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationLogin-related displays NTP-related error displaysCategory Display Description of error System log displaysLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press the Menu buttonWwResetting the limiters Setting/releasing the limitersWwReleasing the limiters Pp Releasing the upper limit position of the movement rangeSafe mode WwConcerning the safe modeTrouble-triggered safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerWwPrecautions when using Windows SymptomSolution 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation