Panasonic AWHE60SE, AWHE60SN, AWHE60HN, AWHE60HE manual WwOther 2/2 screen

Page 50

Camera menu items (continued)

wwOther 2/2 screen

 

Other

2/2

 

Tally Enable

Enable

OSD

Mix

 

 

SDI

/COMP

Off ByBrowser

Browser/Video

On

OSD Off With Tally

Off

OSD

Status

 

Off

Wireless Control

Enable

Return

Tally Enable [Disable, Enable]

“Enable” or “Disable” is set here for the function which turns on or turns off the tally lamp using the tally control signal.

OSD Mix

Whether the camera menus, statuses and other displays are to be turned Off or On can be selected here for each output picture.

SDI(HDMI)/COMP [Off, On, Off ByBrowser] Browser/Video [Off, On]

Off: The camera menus and statuses are not displayed on the output pictures targeted by the setting items listed above.

On: The camera menus and statuses are displayed for the output pictures covered by the setting items listed above.

Off ByBrowser:

If a menu has been opened from the browser screen, the camera menus and statuses are not displayed on the output images for which this setting is established.

Note

ppEven if the display has been set to the off position the camera menus will still be displayed for one minute whenever the power of the unit is turned on.

OSD Off With Tally [Off, On]

This is used to enable or disable the function for clearing the OSD menu displays when the tally signal is received by a command or contact.

When the tally signal is released, the original OSD menu displays are restored.

OSD Status [Off, On]

“Off” or “On” is set here for the status display which appears during AWB operations.

Wireless Control [Disable, Enable]

“Enable” or “Disable” is set here for operations conducted from the wireless remote control.

The operations are enabled when the unit’s power is turned on from an external device other than a wireless remote control, and they are disabled when the power is turned on from a wireless remote control.

Notes

ppAt the point when this item’s setting is changed, the new setting is not reflected in operation.

It is reflected when the unit is set to the standby mode and its power is turned on.

ppFollow one of the procedures below if the item’s setting is changed by mistake and the unit can no longer be operated from a wireless remote control.

When menu operations can be performed using another control device:

First change the item using a control device capable of performing menu operations, and then turn off the unit’s power and turn it back on.

When menu operations cannot be performed using other control devices:

1.Turn off the power of the units and devices that are connected.

2.Disconnect the unit’s power cable, and plug it back in.

3.Perform the operation for turning on the unit’s power from the wireless remote control.

4.After changing this item, turn off the unit’s power and turn it back on.

Return

Use this to return to the previous menu.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE About copyright and licence Illustrations and screen displays featured in the manualTrademarks and registered trademarks AbbreviationsContents WwRequired personal computer environment Before useWwOverview WwNetwork security WwDisclaimer of warrantyBefore use Usage restrictions英語版 要入手 WwConcerning the plug-in viewer softwareSelect the shooting mode Basic shooting operationsSet the Operate switch on the controller to on How to turn the power on and offWwTurning the power on Pp Power on presetSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files WwHow to select the shooting mode Selecting the shooting modes scene filesAW ‑RP655 display AW ‑HE60 scene file Shooting QqUsing the zoom functionQqSwitching the direction or zoom speed QqChanging the camera’s directionMultiple color bands color bars are displayed Lens focus is not adjusted automaticallyUnit does not move Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris Manual shootingWhen 59.94 Hz has been set as the unit’s frequency WwManually adjusting the shutter speedQq How to set the shutter speed using the AW‑RP555 When 50 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Set the memory recording mode Preset memoriesSet to the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Press the M/IRIS button Black level master pedestal adjustmentWwBlack level master pedestal adjustment Press the IRIS - buttonBlack level master pedestal adjustment Press the Iris button several times to turn off its lampQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Basic operations Table of operationsBasic operations Previous menuPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L QqProcedure for camera menu operation AW‑RP655 Press the Menu button to exit the camera menuMode button lights up at the BAR setting Press the Item button QqProcedure for camera menu operation AW‑RP555Perform one of the following steps to select the menu item Press the Menu button for 2 seconds to exit the camera menuQqProcedure for camera menu operation AW‑RP50 Camera OSDWwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwSystem screen WwGenlock screen AW‑HE60S only Squeeze Down CONV. Mode Squeeze, SideCut, LetterBox WwOutput screen SideCutFormat Set screen QqChanging the formatFormat change check screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwMaintenance screen WwFirmware Version screenQqConcerning initialization Default GatewayWwIP Network screen IP AddressFactory setting Menu Selection items FullAuto Manual1 Camera menu item tableCamera menu item table RGB‑NOR, RGB‑ENHControls and settings from web screen Operating system installed Web browser Controls and settings from web screenWwDisplaying the web screen using a personal computer Start the web browser of the personal computerControls and settings from web screen  Image Capture Size button Image Capture Size WwLive screen Single display mode Multi-Screen list box Multi-screen  Compression button Compression Camera button / Color bar button CAM/BAR  Power ON button / Standby button OSD Menu Operation  Operation lock button Op.Lock Main area IP video display area  Focus  Preset Zoom  Control pad and its buttons SnapShot  Full-screen displayWwLive screen Multi display mode WwSetup screen QqBasic screenCamera title 0 to 20 half-size characters Automatic installation of viewer software On, Off Basic button  Camera title display areaQqImage screen IP video settings Video over IP Video over IP Monitoring mode 16 9 resizeImage capture size QVGA, VGA Jpeg image settingsImage settings Transmission On, OffImage capture size QVGA, VGA Initial setting VGA Refresh intervalMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Image  Image Image adjust Preset positionImage adjust screen 仕向地による違い Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBColor Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Speed With Zoom POS  Focus ADJ With PTZ Preset Setting Preset Speed 1 to  Limitation Setting Genlock AW‑HE60S only Horizontal Phase -206 to +49 System screen Output  Frequency 59.94Hz, 50Hz Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng Host auth. screen  Host auth  Access level  Host checkStream type Priority stream Priority stream Activation QqServer QqNetwork Network screen  IP networkDNS Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68 System name 0 to 32 half-size characters Snmp screen Community 0 to 32 half-size characters  Location 0 to 32 half-size charactersSystem log screen QqMaintenance Error description  Time & date MAC address Product info. screen Model no  Serial no Viewer software installation counter  Status Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download WpDisplaying the web screen using a mobile terminal  Pan/Tilt Resolution switching  Iris  Camera menu OSD menu operation  Tally lamp lighting status displaysCategory Display Description of error NTP-related error displaysLogin-related displays System log displaysLimiters WwBasic limiter operations Setting/releasing the limitersWwSetting the limiters Press the Menu buttonWwReleasing the limiters Setting/releasing the limitersWwResetting the limiters Pp Releasing the upper limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwSystem requirements for a personal computer WwTrademarks and Registered TrademarksSolution WwPrecautions when using WindowsSymptom 英語版必要 QqRestrictions 108109 Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsIndex XxA XxFIndex XxN XxTMemo Web Site http//panasonic.net Panasonic Corporation
Top Page Image Contents