Panasonic AWHE60SN, AWHE60HN, AWHE60SE, AWHE60HE manual Basic operations, Table of operations

Basic operations

Camera menus are displayed on the monitor when the unit’s settings are to be selected.

The monitor is connected to the video signal output connector.

The basic camera menu operations involve displaying

sub‑menus from the Top Menu items, and selecting settings on the sub‑menus.

Some sub‑menus have menu items for performing more detailed settings.

The camera menu operations are conducted using the wireless remote control.

If a controller is connected, they can also be conducted using the controller.

ppIt may be necessary to upgrade the controller’s version in order to support the AW‑HE60.

For further details, consult with your dealer.

Described below are the basic operations for changing the camera menu item settings using the wireless remote control and controller (AW‑RP655, AW‑RP555 or AW‑RP50).

Only the steps taken using the wireless remote control will be described here for the operations conducted to select and set the items.

For details of the operations conducted using the controller, substitute “controller” for “wireless remote control” when reading the basic operations. Also, refer to the Operating Instructions of the controller.

Table of operations

Camera menu	Wireless remote		Controller
operation	control	AW‑RP655	AW‑RP555	AW‑RP50
Selecting the	Press the [CAM1],	Press one of the [1] to [5]
		buttons of [CONTROL/	Press one of the [1] to [5]	Press one of the [CAMERA
unit to be	[CAM2], [CAM3] or
		PREVIEW MONITOR OUT	buttons of [CONTROL].	STATUS/SELECTION] buttons.
operated	[CAM4] button.
		SEL].
		1. Press the [MENU] button.
		The display on the
		AW‑RP655’s LCD panel
		changes to the menu mode.
		2. Turn the jog dial (main)
		to display “CAMERA
		SETTING” on the LCD
		panel, and press the [OK]
Displaying the	Press the [MENU]	button.	Press the [MENU] button for	Press the [CAMERA OSD]
		3. The scene selection menu
Top Menu	button for 2 seconds.		2 seconds.	button for 2 seconds.
		now appears on the LCD
		panel so select the scene to
		be set, and press the [OK]
		button.
		4. If the “OPEN CAMERA
		MENU?  OK Key”
		message appears on the
		LCD panel, press the [OK]
		button again.
Selecting the	Press the [] or []	Turn the jog dial (main).	Press the [YES] or [NO] button.	Turn the F1 dial.
items	([] or []) button.
Displaying the	Press the [] button.	Press the jog dial (main).	Press the [ITEM] button.	Press the F1 dial.
sub‑menus

32