Panasonic AWHE60HN, AWHE60SN, AWHE60SE, AWHE60HE manual WwOther 1/2 screen

Page 49

Camera menu items (continued)

wwOther 1/2 screen

Other 1/2

 

 

Install

Position

Desktop

Preset

Speed

 

10

Preset

Scope

Mode

A

Digital

Zoom

Disable

Speed With Zoom POS.

On

Focus Mode

Auto

Focus

ADJ With

PTZ. ----

Return

Install Position [Desktop, Hanging]

“Desktop” or “Hanging” is selected here as the method used to install the unit.

Desktop: Stand-alone installation

Hanging: Suspended installation

When “Hanging” has been selected, the top, bottom, left and right of the images will be reversed, and up/down/left/right control for panning and tilting will also be reversed.

Digital Zoom [Disable, Enable]

“Enable” or “Disable” is set here for the digital zoom function.

If zooming is performed toward the Tele end beyond the maximum position when “Enable” has been selected, the digital zoom can be operated continuously. Zooming will stop temporarily at the position where the optical zoom and digital zoom are switched so after it has stopped at this position, proceed with zooming again.

When the setting is changed to “Disable” while already in the digital zoom region, the zoom will automatically move to the maximum position of the optical zoom.

Note

ppThe digital zoom is set to off when color bars are displayed during digital zooming.

Speed With Zoom POS. [Off, On]

“Off” or “On” is set here for the function used to adjust the camera direction’s adjustment speed in conjunction with the zoom magnification.

When “On” is set, the panning and tilting operations will become slower in the zoom status.

This function has no effect during preset operations.

Preset Speed [1 to 30]

There are 30 preset pan-tilt operation speeds when regenerating the camera direction and other information which are registered in the preset memory.

Notes

ppIf a high value is selected for the Preset Speed

setting, the image on the screen may shake when operation stops.

ppWhen connecting the unit to the AWRP655 for use, the “DIAGONAL SPEED (P/T SETTING)” setting of the AWRP655 takes effect.

To change the Preset Speed, change the AWRP655 setting.

Preset Scope [Mode A, Mode B, Mode C]

Selected here are the setting items to be recalled when the contents of the preset memory are regenerated.

Mode A: Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain, White-BAL

Mode B: Pan, Tilt, Zoom (including digital zoom), Focus, Iris

Mode C: Pan, Tilt, Zoom (including digital zoom), Focus

Focus Mode [Auto, Manual]

“Auto” or “Manual” is set here for the focusing function.

Auto: The subjects are always brought into focus automatically.

Manual: The focus is operated manually.

Focus ADJ With PTZ. [Off, On]

“Off” or “On” is set here for the function which compensates for out-of-focusing when it occurs during panning, tilting or zooming operations at the manual focus setting.

When “Off” is set, adjust the focus as required after zooming or set the focus to the auto mode.

This item can be selected only when “Manual” has been selected as the “Focus Mode” setting.

Return

Use this to return to the previous menu.

49

Image 49
Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Trademarks and registered trademarks Illustrations and screen displays featured in the manualAbout copyright and licence AbbreviationsContents WwOverview Before useWwRequired personal computer environment Before use WwDisclaimer of warrantyWwNetwork security Usage restrictionsWwConcerning the plug-in viewer software 英語版 要入手Basic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on Pp Power on presetWwTurning the power off How to turn the power on and offSet the Operate switch on the controller to OFF Selecting the shooting modes scene files Selecting the unitsWwTypes of shooting modes Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisQq How to set the shutter speed using the AW‑RP555 WwManually adjusting the shutter speedWhen 59.94 Hz has been set as the unit’s frequency When 50 Hz has been set as the unit’s frequencyPress the OFF, LOW or HI button WwManually adjusting the gainPress the Gain button to turn off its lamp Preset memories Set to the memory recording mode Preset memoriesSet the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected WwWhite balance adjustment White balance adjustmentQqAutomatic adjustment AWB AWB A or AWB B Press the SET button for 2 seconds White balance adjustmentPress the AWC button QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentWwGenlock adjustment Genlock adjustment AW‑HE60S onlyQqHorizontal phase adjustment QqColor phase adjustment Genlock adjustment AW‑HE60S onlyPress the Mode button Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial L Jog dial mainJog dial R Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Item button Press the Menu button for 2 seconds to exit the camera menuCamera OSD QqProcedure for camera menu operation AW‑RP50Camera menu items WwSetting the camera menu itemsWwTop Menu screen WwCamera screen When Manual1 to 3 is selected WwCamera screen When FullAuto is selectedCamera menu items WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenWwOutput screen Down CONV. Mode Squeeze, SideCut, LetterBoxSqueeze SideCutFormat change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenWwIP Network screen Default GatewayQqConcerning initialization IP AddressCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen WwDisplaying the web screen using a personal computer Controls and settings from web screenOperating system installed Web browser Start the web browser of the personal computerControls and settings from web screen  Multi-Screen list box Multi-screen WwLive screen Single display mode Image Capture Size button Image Capture Size  Compression button Compression OSD Menu Operation  Power ON button / Standby button Camera button / Color bar button CAM/BAR  Operation lock button Op.Lock Main area IP video display area  Zoom  Preset Focus  Control pad and its buttons Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Basic button Automatic installation of viewer software On, OffCamera title 0 to 20 half-size characters  Camera title display area Video over IP Monitoring mode IP video settings Video over IPQqImage screen 16 9 resizeImage settings Jpeg image settingsImage capture size QVGA, VGA Transmission On, OffRefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast port 1024 to 50000 Only even numbers can be set Multicast address Setting range 224.0.0.0 toMulticast TTL/HOPLimit 1 to Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established QqMulti-screen Multi-screen setup  IP address To 128 half-size characters Camera title To 20 half-size characters QqUser mng  Host check Host auth. screen  Host auth  Access level Priority stream Activation Priority streamStream type QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Community 0 to 32 half-size characters Snmp screen System name 0 to 32 half-size characters  Location 0 to 32 half-size characters Error description QqMaintenanceSystem log screen  Time & date Model no Product info. screen MAC address  Serial no Status  Viewer software installation counter Reset to the default Except the network settings Default reset screen Reboot  Download Back up screen Upload  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationLogin-related displays NTP-related error displaysCategory Display Description of error System log displaysLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press the Menu buttonWwResetting the limiters Setting/releasing the limitersWwReleasing the limiters Pp Releasing the upper limit position of the movement rangeWwConcerning the safe mode Safe modeTrouble-triggered safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerSymptom WwPrecautions when using WindowsSolution 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation