Panasonic AWHE60HN, AWHE60SN manual Camera menu items, WwCamera screen When FullAuto is selected

Page 41

Camera menu items (continued)

wwCamera screen

(when FullAuto is selected)

This menu is used for the camera image settings.

Camera

SceneFullAuto

Contrast Level0

Day/NightDay

Return

Scene

[FullAuto, Manual1, Manual2, Manual3]

Selected here is the shooting mode that matches the shooting situation.

Select the mode which best suits the prevailing shooting conditions and the user’s preferences.

FullAuto: In this mode, the optimum settings and adjustments for the shooting conditions at hand are automatically established. When “FullAuto” has been selected, the detailed setting and adjustment menus are not displayed.

Manual1 to 3: In these modes, the detailed settings and adjustments are established manually to match the prevailing shooting conditions and the user’s preferences.

When the Manual1, Manual2 or Manual3 mode has been selected, the detailed setting and adjustment menu for the mode concerned is displayed.

Contrast Level [–5 to +5]

Use the contrast level to adjust the image brightness.

Day/Night [Day, Night]

This is used to select normal shooting or low light shooting (by exposing the subjects to infrared rays).

Day: Normal shooting

Night: Low light shooting

In Night mode, Black-and-white images are output.

The lens iris is forcibly set to open.

Return

Use this to return to the previous menu.

wwCamera screen

(when Manual1 to 3 is selected)

Camera

SceneManual1

Contrast

Picture

Color Matrix

Return

Scene

[FullAuto, Manual1, Manual2, Manual3]

Refer to section on Scene in the column on the left.

Contrast

Select this to display the Contrast screen to adjust the brightness.

Picture

This menu item displays the Picture screen on which to adjust the picture quality.

Two screens (Picture 1/2 and Picture 2/2) are provided for the picture quality adjustment menu.

Color Matrix

This menu item is used to adjust the 16-axis color matrix.

Return

Use this to return to the previous menu.

41

Image 41

Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Trademarks and registered trademarks Illustrations and screen displays featured in the manualAbout copyright and licence AbbreviationsContents WwRequired personal computer environment Before useWwOverview Before use WwDisclaimer of warrantyWwNetwork security Usage restrictionsWwConcerning the plug-in viewer software 英語版要入手Basic shooting operations Select the shooting modeWwTurning the power on How to turn the power on and offSet the Operate switch on the controller to on Pp Power on presetSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files Selecting the shooting modes scene files WwHow to select the shooting modeAW ‑RP655 display AW ‑HE60 scene file QqSwitching the direction or zoom speed QqUsing the zoom functionShooting QqChanging the camera’s directionUnit does not move Lens focus is not adjusted automaticallyMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations Manual shooting WwManually adjusting the focusManual shooting WwManually adjusting the irisQq How to set the shutter speed using the AW‑RP555 WwManually adjusting the shutter speedWhen 59.94 Hz has been set as the unit’s frequency When 50 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Set to the memory recording mode Preset memoriesSet the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment WwBlack level master pedestal adjustment Black level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonPress the Iris button several times to turn off its lamp Black level master pedestal adjustmentQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Table of operations Basic operationsPrevious menu Basic operationsPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L Press the Menu button to exit the camera menu QqProcedure for camera menu operation AW‑RP655Mode button lights up at the BAR setting Perform one of the following steps to select the menu item QqProcedure for camera menu operation AW‑RP555Press the Item button Press the Menu button for 2 seconds to exit the camera menuCamera OSD QqProcedure for camera menu operation AW‑RP50WwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwGenlock screen AW‑HE60S only WwSystem screenWwOutput screen Down CONV. Mode Squeeze, SideCut, LetterBoxSqueeze SideCutFormat change check screen QqChanging the formatFormat Set screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwFirmware Version screen WwMaintenance screenWwIP Network screen Default GatewayQqConcerning initialization IP AddressCamera menu item table Factory setting Menu Selection items FullAuto Manual1RGB‑NOR, RGB‑ENH Camera menu item tableControls and settings from web screen WwDisplaying the web screen using a personal computer Controls and settings from web screenOperating system installed Web browser Start the web browser of the personal computerControls and settings from web screen  Multi-Screen list box Multi-screen WwLive screen Single display mode Image Capture Size button Image Capture Size  Compression button Compression OSD Menu Operation  Power ON button / Standby button Camera button / Color bar button CAM/BAR  Operation lock button Op.Lock Main area IP video display area  Zoom  Preset Focus  Control pad and its buttons Full-screen display  SnapShotWwLive screen Multi display mode QqBasic screen WwSetup screen Basic button Automatic installation of viewer software On, OffCamera title 0 to 20 half-size characters  Camera title display area Video over IP Monitoring mode IP video settings Video over IPQqImage screen 16 9 resizeImage settings Jpeg image settingsImage capture size QVGA, VGA Transmission On, OffRefresh interval Image capture size QVGA, VGA Initial setting VGAMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Preset position Image  Image Image adjust仕向地による違い Image adjust screen Scene FullAuto, Manual1, Manual2, Manual3  Contrast Contrast Mode Auto, ManualAWB  Picture Chroma Level -3 to +3Color Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Focus ADJ With PTZ  Speed With Zoom POS Limitation Setting  Preset Setting Preset Speed 1 toSystem screen  Genlock AW‑HE60S only Horizontal Phase -206 to +49 Frequency 59.94Hz, 50Hz  Output Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng  Host check Host auth. screen  Host auth  Access levelStream type Priority stream Priority stream Activation QqServer Network screen  IP network QqNetworkPort numbers already used 20, 21, 23, 25, 42, 53, 67, 68 DNS Community 0 to 32 half-size characters Snmp screen System name 0 to 32 half-size characters  Location 0 to 32 half-size characters Error description QqMaintenanceSystem log screen  Time & date Model no Product info. screen MAC address  Serial no Status  Viewer software installation counter Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download  Pan/Tilt WpDisplaying the web screen using a mobile terminal Resolution switching  Iris  Tally lamp lighting status displays  Camera menu OSD menu operationLogin-related displays NTP-related error displaysCategory Display Description of error System log displaysLimiters WwSetting the limiters Setting/releasing the limitersWwBasic limiter operations Press the Menu buttonWwResetting the limiters Setting/releasing the limitersWwReleasing the limiters Pp Releasing the upper limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwTrademarks and Registered Trademarks WwSystem requirements for a personal computerSolution WwPrecautions when using WindowsSymptom 英語版必要 108 QqRestrictions109 Restriction 2 When using Windows 7 with some products Restriction 1 On the setup pages for some productsXxA XxF IndexXxN XxT IndexMemo Web Site http//panasonic.net Panasonic Corporation