Panasonic AWHE60SN, AWHE60HN, AWHE60SE, AWHE60HE manual  Scene FullAuto, Manual1, Manual2, Manual3

Controls and settings from web screen (continued)

Scene

[FullAuto, Manual1, Manual2, Manual3]

Selected here is the shooting mode that matches the shooting situation.

Select the mode which best suits the prevailing shooting conditions and the user’s preferences.

FullAuto	In this mode, the optimum settings and
	adjustments for the shooting conditions at
	hand are automatically established.
	When “FullAuto” has been selected, the
	detailed setting and adjustment menus
	are not displayed.
Manual1 to 3	In these modes, the detailed settings and
	adjustments are established manually to
	match the prevailing shooting conditions
	and the user’s preferences.
	When the Manual1, Manual2 or Manual3
	mode has been selected, the detailed
	setting and adjustment menu for the
	mode concerned is displayed.

Contrast

Contrast Mode [Auto, Manual]

This item is used to select whether the image brightness (contrast) is to be controlled automatically or manually.

Auto	The iris, shutter speed and frame addition
	are controlled and the camera brightness is
	adjusted automatically.
Manual	Operations are performed using the manually
	set values.

Contrast Level [–5 to +5]

Set here is the contrast level when the image brightness is adjusted.

This item can be set when “Auto” has been selected as the “Contrast Mode” setting.

Shutter Mode [Off, Step, Synchro]

Select for camera shutter speed.

This item can be set when “Manual” has been selected as the “Contrast Mode” setting.

When a higher shutter speed is selected, fast-moving subjects do not become blurred easily but the images will be darker.

Off	The shutter is set to OFF (so that it cannot be
	tripped).
Step	The step shutter is set (the steps can be
	changed).
Synchro	The synchro shutter is set (the setting can be
	changed continuously).

The shutter speeds that can be set are listed below.

[When 59.94 Hz has been set as the unit’s frequency]

When “Step” is selected as	When “Synchro” is selected
the “Shutter Mode”	as the “Shutter Mode”
1/100, 1/250, 1/500, 1/1000,	60.24 Hz to max. 646.21 Hz
1/2000, 1/4000, 1/10000	(255 steps)

[When 50 Hz has been set as the unit’s frequency]

When “Step” is selected as	When “Synchro” is selected
the “Shutter Mode”	as the “Shutter Mode”
1/120, 1/250, 1/500, 1/1000,	50.20 Hz to max. 538.51 Hz
1/2000, 1/4000, 1/10000	(255 steps)

Frame Mix [Auto, Off, 6dB, 12dB, 18dB]

Select for frame addition (gain-up using sensor storage) amount.

This item can be set when “Off” is selected as the “Shutter Mode” item setting.

When frame addition is performed, it will appear as if the images are missing some frames.

AutoF. Mix Max Gain [0dB, 6dB, 12dB, 18dB]

When “Auto” for the “Contrast Mode” or “Auto” for the “Frame Mix” is selected, the maximum frame addition amount can be set.

If frame addition is performed at the Auto setting, it will appear as if the images are missing some frames.

Gain

[Auto, 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB]

The image gain is adjusted here.

In locations which are too dark, adjust the gain upward; conversely, in locations which are too bright, adjust it downward.

When “Auto” is set, the light quantity is adjusted automatically.

The noise increases when the gain is increased.

AGC Max Gain [6dB, 12dB, 18dB]

When “Auto” is selected as the “Gain” setting, the maximum gain-up amount can be set.

72