Panasonic AWHE60HE, AWHE60SN, AWHE60HN, AWHE60SE manual QqServer

Controls and settings from web screen (continued)

qqServer

This screen has items that relate to the NTP server addresses, port numbers and other NTP server settings.

NTP screen

仕向地による

タイムゾーンの違い

Time adjustment

<Initial setting: Off>

Select one of the following settings as the time adjustment method.

The time is adjusted by the method selected here and used as the unit’s standard time.

Off	The time is counted from 0:00 on
	January 1, 1990 as the unit’s startup
	time.
Synchronization	The time automatically adjusted in
with NTP server	synchronization with the NTP server is
	used as the unit’s standard time.

NTP server address

[1 to 128 half-size characters]

<Initial setting: blank>

The host name or IP address of the NTP server is input here.

Note

ppTo input the “NTP server address” host name,

the DNS setting (page 89) must be selected on the Network screen of the Network settings.

NTP port [1 to 65535]

<Initial setting: 123>

The port number of the NTP server is input here.

Time adjustment interval

<Initial setting: 1h>

The interval (1 to 24 hours in 1-hour increments) for acquiring the time from the NTP server and updating the time is selected here.

Time zone

<Initial setting for AW‑HE60HN/AW‑HE60SN:

(GMT -08:00) Pacific Time (US & Canada), Tijuana> <Initial setting for AW‑HE60HE/AW‑HE60SE:

(GMT -08:00) Greenwich Mean Time: Dublin, Edinburgh, Lisbon, London>

Select the time zone that corresponds with the region in which the unit is going to be used.

87