Panasonic AWHE60HN  Zoom,  Focus,  Control pad and its buttons,  Brightness,  Speed,  Scene

Controls and settings from web screen (continued)

Zoom

Use this to enable or disable the digital zoom.

Use this to adjust the zoom (magnification) to 1.0.

Use this to adjust the zoom (magnification) in the Wide direction.

Use this to adjust the zoom (magnification) in the Tele direction.

Focus

Use this to switch between auto and manual focusing.

When Auto is selected, the focus is adjusted automatically.

Use this to adjust the focus in the Near direction.

It does not work during automatic adjustments.

When this is pressed while the focus is being adjusted manually, the focus will be temporarily adjusted automatically.

It does not work during automatic adjustments.

Use this to adjust the focus in the Far direction.

It does not work during automatic adjustments.

Control pad and its buttons

To adjust the image in the horizontal or vertical direction (panning or tilting), left-click the pad and the buttons.

The more the outside of the pad is clicked, the faster the camera operates. Adjustment is also possible by dragging the mouse.

Right-click the pad to initiate zooming and focusing.

When the top half of the pad is clicked in the up or down direction, the zoom (magnification) is adjusted in the Tele direction; conversely, when the bottom half of the pad is adjusted, the zoom is adjusted in the Wide direction.

When the left half of the pad is clicked in the left or right direction, the focus is adjusted in the Near direction; conversely when the right half of the pad is adjusted, the focus is adjusted in the Far direction.

The zooming can also be adjusted by operating the mouse wheel.

Note

ppWhen the mouse is used for dragging and dropping from the control pad area to a position outside this area, the panning, tilting and other operations will not stop.

In a case like this, click the control pad area to stop these operations.

Brightness

Use this to make the image darker. It does not work during automatic adjustments.

Use this to make the image lighter. It does not work during automatic adjustments.

Use this to switch the brightness adjustment between auto and manual.

When Auto is selected, the picture brightness is adjusted automatically.

Speed

Use this to select the speed at which the pan, tilt, zoom and focus operations are to be performed.

Preset

When the preset position is selected from the pull‑down menu and the Move button is clicked, the camera direction moves to the preset position which was registered ahead of time.

Preset positions are registered on the preset position screen.

The camera direction moves to the preset position which is now selected on the pull‑down menu.

The settings that are reproduced at this position are the settings which were established on the “Preset Scope” menu (see pages 49, 78 and 81).

The camera direction moves to the home position if “Home” has been selected on the pull‑down menu.

Scene

Use this if the scenes are to be switched when the shooting mode is selected from the pull-down menu and the Set button is clicked.

Use this to switch to the shooting mode now being selected using the pull-down menu.

61