Panasonic AWHE60SN, AWHE60HN, AWHE60SE, AWHE60HE manual WwPicture 2/2 screen

Page 44

Camera menu items (continued)

wwPicture 2/2 screen

Picture		2/2
Pedestal			0
DRS			Off
Gamma	Type		Normal
Gamma	Level		Mid
Back Light		COMP.	Off
Day/Night			Day

Return

Pedestal [–10 to +10]

This item is used to adjust the black level (adjust the pedestal) so that the dark parts of the images are easier to see.

These parts become darker when a negative setting is selected and, conversely, lighter when a positive setting is selected.

DRS [Off, Low, High]

Set here is the DRS function which provides just the right amount of compensation when images with significant light/dark differences are displayed.

When “Low” or “High” is selected, the effect is enhanced even more.

This may make noise more perceptible with some scenes.

Gamma Type [Off, Normal, Cinema]

Selected here is the type of gamma curve.

The selected setting takes effect when “Off” is selected as the “DRS” item setting.

Normally, the “Normal” setting is used.

When “Cinema” is selected, images giving off an atmosphere like movies can be shot.

Gamma Level [Low, Mid, High]

This item is used to adjust the gamma compensation level. The item’s setting takes effect when “Off” has been selected as the “DRS” setting and “Normal” as the “Gamma Type” setting.

When “Low” is set, the images appear sedate and composed. The resulting gamma curve has a gentle gradient in the low-brightness areas, and the contrast is sharper.

Conversely, when “High” is set, the tonal range in the dark area is expanded so that the images take on a lighter tone. The resulting gamma curve has a sharp gradient in the low-brightness areas, and the contrast is softer.

Back Light COMP. [Off, On]

“On” or “Off” is set here for the backlight compensation function.

Under backlight conditions, the function prevents darkening as a result of light striking the backs of subjects, and makes it possible to shoot images in shade or shadow more brightly.

The function takes effect when “Auto” has been selected as the Contrast Mode, Gain or Frame Mix item setting.

Day/Night [Day, Night]

This is used to select normal shooting or low light shooting (by exposing the subjects to infrared rays).

Day: Normal shooting

Night: Low light shooting

In Night mode, Black-and-white images are output.

The lens iris is forcibly set to open.

Return

Use this to return to the previous menu.

44

Image 44

Contents AW‑HE60HN AW‑HE60SN AW‑HE60HE AW‑HE60SE Illustrations and screen displays featured in the manual Trademarks and registered trademarksAbout copyright and licence AbbreviationsContents WwRequired personal computer environment Before useWwOverview WwDisclaimer of warranty Before useWwNetwork security Usage restrictions英語版要入手 WwConcerning the plug-in viewer softwareSelect the shooting mode Basic shooting operationsHow to turn the power on and off WwTurning the power onSet the Operate switch on the controller to on Pp Power on presetSet the Operate switch on the controller to OFF How to turn the power on and offWwTurning the power off WwTypes of shooting modes Selecting the unitsSelecting the shooting modes scene files WwHow to select the shooting mode Selecting the shooting modes scene filesAW ‑RP655 display AW ‑HE60 scene file QqUsing the zoom function QqSwitching the direction or zoom speedShooting QqChanging the camera’s directionLens focus is not adjusted automatically Unit does not moveMultiple color bands color bars are displayed Menu screen is displayedMore advanced operations WwManually adjusting the focus Manual shootingWwManually adjusting the iris Manual shootingWwManually adjusting the shutter speed Qq How to set the shutter speed using the AW‑RP555When 59.94 Hz has been set as the unit’s frequency When 50 Hz has been set as the unit’s frequencyPress the Gain button to turn off its lamp WwManually adjusting the gainPress the OFF, LOW or HI button Preset memories Preset memories Set to the memory recording modeSet the memory recording mode Hold down the Reset buttonWhen the AW‑RP555 is connected QqAutomatic adjustment AWB AWB A or AWB B White balance adjustmentWwWhite balance adjustment Press the AWC button White balance adjustmentPress the SET button for 2 seconds QqAuto tracking white adjustment ATW QqManual adjustment Gain and B gain adjustment Black level master pedestal adjustment WwBlack level master pedestal adjustmentPress the M/IRIS button Press the IRIS - buttonBlack level master pedestal adjustment Press the Iris button several times to turn off its lampQqHorizontal phase adjustment Genlock adjustment AW‑HE60S onlyWwGenlock adjustment Press the Mode button Genlock adjustment AW‑HE60S onlyQqColor phase adjustment Genlock adjustment AW‑HE60S only Basic operations Table of operationsBasic operations Previous menuPress the  or  button to change the setting Jog dial R Jog dial mainJog dial L QqProcedure for camera menu operation AW‑RP655 Press the Menu button to exit the camera menuMode button lights up at the BAR setting QqProcedure for camera menu operation AW‑RP555 Perform one of the following steps to select the menu itemPress the Item button Press the Menu button for 2 seconds to exit the camera menuQqProcedure for camera menu operation AW‑RP50 Camera OSDWwTop Menu screen WwSetting the camera menu itemsCamera menu items Camera menu items WwCamera screen When FullAuto is selectedWwCamera screen When Manual1 to 3 is selected WwContrast screen WwPicture 1/2 screen WwPicture 2/2 screen Ww16-axis color matrix WwSystem screen WwGenlock screen AW‑HE60S onlyDown CONV. Mode Squeeze, SideCut, LetterBox WwOutput screenSqueeze SideCutQqChanging the format Format change check screenFormat Set screen Format unchanged screenWwOther 1/2 screen WwOther 2/2 screen WwMaintenance screen WwFirmware Version screenDefault Gateway WwIP Network screenQqConcerning initialization IP AddressFactory setting Menu Selection items FullAuto Manual1 Camera menu item tableCamera menu item table RGB‑NOR, RGB‑ENHControls and settings from web screen Controls and settings from web screen WwDisplaying the web screen using a personal computerOperating system installed Web browser Start the web browser of the personal computerControls and settings from web screen WwLive screen Single display mode  Multi-Screen list box Multi-screen Image Capture Size button Image Capture Size  Compression button Compression Power ON button / Standby button  OSD Menu Operation Camera button / Color bar button CAM/BAR  Operation lock button Op.Lock Main area IP video display area  Preset  Zoom Focus  Control pad and its buttons SnapShot  Full-screen displayWwLive screen Multi display mode WwSetup screen QqBasic screenAutomatic installation of viewer software On, Off  Basic buttonCamera title 0 to 20 half-size characters  Camera title display areaIP video settings Video over IP  Video over IP Monitoring modeQqImage screen 16 9 resizeJpeg image settings Image settingsImage capture size QVGA, VGA Transmission On, OffImage capture size QVGA, VGA Initial setting VGA Refresh intervalMulticast TTL/HOPLimit 1 to Multicast address Setting range 224.0.0.0 toMulticast port 1024 to 50000 Only even numbers can be set Image  Image Image adjust Preset positionImage adjust screen 仕向地による違い Contrast Contrast Mode Auto, Manual  Scene FullAuto, Manual1, Manual2, Manual3 Picture Chroma Level -3 to +3 AWBColor Matrix Normal, EBU, NTSC, User User Color Matrix Setup screen Preset position setting screen  Preset  Zoom  Speed With Zoom POS  Focus ADJ With PTZ Preset Setting Preset Speed 1 to  Limitation Setting Genlock AW‑HE60S only Horizontal Phase -206 to +49 System screen Output  Frequency 59.94Hz, 50Hz Other Images for which this setting is established  Camera title To 20 half-size characters Multi-screen setup  IP address To 128 half-size charactersQqMulti-screen QqUser mng Host auth. screen  Host auth  Access level  Host checkStream type Priority stream Priority stream Activation QqServer QqNetwork Network screen  IP networkDNS Port numbers already used 20, 21, 23, 25, 42, 53, 67, 68Snmp screen  Community 0 to 32 half-size characters System name 0 to 32 half-size characters  Location 0 to 32 half-size charactersQqMaintenance  Error descriptionSystem log screen  Time & dateProduct info. screen  Model no MAC address  Serial no Viewer software installation counter  Status Reboot Default reset screen Reset to the default Except the network settings  Upload Back up screen Download WpDisplaying the web screen using a mobile terminal  Pan/Tilt Resolution switching  Iris  Camera menu OSD menu operation  Tally lamp lighting status displaysNTP-related error displays Login-related displaysCategory Display Description of error System log displaysLimiters Setting/releasing the limiters WwSetting the limitersWwBasic limiter operations Press the Menu buttonSetting/releasing the limiters WwResetting the limitersWwReleasing the limiters Pp Releasing the upper limit position of the movement rangeTrouble-triggered safe mode Safe modeWwConcerning the safe mode WwSystem requirements for a personal computer WwTrademarks and Registered TrademarksSolution WwPrecautions when using WindowsSymptom 英語版必要 QqRestrictions 108109 Restriction 1 On the setup pages for some products Restriction 2 When using Windows 7 with some productsIndex XxA XxFIndex XxN XxTMemo Web Site http//panasonic.net Panasonic Corporation