Panasonic AWHE60HE, AWHE60SN, AWHE60HN QqProcedure for camera menu operation AW‑RP50, Camera OSD

Basic operations (continued)

wwControl exercised from the Remote Camera Controller AW‑RP50

F1

F2

POWER ALARM

		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION
		AUTO
TELE
ZOOM					LOW	HI
	WIDE
			FOCUS/PUSH OAF		PTZ/FOCUS SPEED

F1 CAMERA OSD

F2 EXIT

USER1 USER2

PT ACTIVE

For operating the camera menus.

CAMERA OSD:

When this is pressed for 2 seconds, the selected camera menu is displayed, overlapping the camera output image. When it is pressed for 2 seconds while a camera menu is displayed, the menu is cleared.

F1: Turn F1 to move the cursor up or down on the camera menu or change the setting.

Press it when moving to the menu at the next lower hierarchical level or changing a setting at the very bottom hierarchical level.

For selecting the cameras to be operated.

qqProcedure for camera menu operation (AW‑RP50)

1Press one of the [CAMERA STATUS/ SELECTION] buttons to select the unit which is to be operated.

2Press the [CAMERA OSD] button of the AW‑RP50 for 2 seconds.

The camera menu of the AW‑HE60 is displayed on the monitor.

3Turn the F1 dial to select the AW‑HE60 camera menu item or change the data.

Turn the F1 dial to move the cursor up or down or change the setting.

Press it to move to the menu at the next lower hierarchical level or change a blinking setting at the very bottom hierarchical level.

4Press the [CAMERA OSD] button for 2 seconds to exit the camera menu.

39