Installation and User Manual
Module | Refers to individual power inverter module. |
N | Neutral. |
NC | Normally closed. |
NO | Normally open. |
NEC | National Electrical Code. |
NEMA | National Electrical Manufacturers Association. |
NFPA | National Fire Protection Association. |
PF | Power factor. |
PN | Part number. |
Inverter output power is the primary energy source to load. | |
Inverter output is off, and the load connected at the inverter output receives power | |
| from utility line via a static transfer switch or maintenance bypass relay. |
OSHA | Occupational Safety and Health Agency. |
PCA | Printed circuit assembly. |
PCB | Printed circuit board. |
PWM | Pulse Width Modulation. |
SCR | Silicon controlled rectifier. |
Shipping damage | Any damage done to an article while it is in transit. |
SPDT | Single Pole Double Throw. |
Static Transfer | An solid state switching mechanism electronically controlled to pass AC power |
| directly from the utility to an output load. |
Technician | Refers to an electronic technician qualified to maintain and repair electronic |
| equipment. Not necessarily qualified to install electrical wiring. |
Test connector | |
| Support Service technician to access programmable and diagnostic features of the |
| system. |
UL | Underwriter's Laboratories, Inc. |
UPS | Uninterruptible Power Supply or Uninterruptible Power System. |
V | Volts |
VA | Volt amperes |
VA | |
VAC or Vac | Voltage of AC type. |
VDC or Vdc | Voltage of DC type. |
ve | Battery voltage. |
Via | By way of. |
Glossary | G — 3 |