Toshiba B-SP2D owner manual Serial Interface RS-232C, Bluetooth Interface

Page 16

2. SPECIFICATIONS

EO1-33038

 

2.2 SERIAL INTERFACE (RS-232C)

 

 

 

 

Item

Description

Interface

GH20 model: IrDA + RS-232C

 

GH30 model: IrDA + Bluetooth

 

GH40 model: IrDA + Wireless LAN

Power source

Lithium ion battery 7.4V 1400mA (nominal)

 

 

NOTES: 1. Print speed automatically changes depending on the operating temperature, head temperature, and battery voltage.

2.Some fonts and bar codes are not available depending on the print mode.

3.Some two-dimensional codes are not available depending on the print mode.

2.2SERIAL INTERFACE (RS-232C)

The following specification is applicable only to the GH20 model.

Item

Description

Baud rate

9600 ~ 115,200 bps

Protocol

XON/XOFF, 8 bit data, Even parity, Non parity,

 

Start bit = 1 bit, Stop bit = 1 bit

Signals

TXD, RXD

 

 

2.3 BLUETOOTH INTERFACE

The following specification is applicable only to the GH30 model.

Item

Description

Type

Bluetooth V1.1

Support profile

Serial Port Profile

Radio class

Class 2

Communication method

Bi-directional (Half-duplex)

Communicating distance

3m (360 degrees angle)

Data code

JIS 8 code, Shift JIS code

Transmission control

Credit Based Flow Control

Operating mode

Slave mode

 

 

2- 2

Image 16
Contents SP2D Series CE Compliance for EU only VorsichtTrade Mark For all countries and areasFor USA Precaution in use TEC-BTM SpecificationSafety Summary Safety PrecautionsSafety Precautions Safety Precautions Precautions Safety Precautions Table of Contents Connecting the Serial Interface Cable Introduction Applicable Model AccessoriesP 2 D G H 2 0 -Q M Specifications PrinterBluetooth Interface Serial Interface RS-232CWireless LAN Interface Battery Media Label Tag/Receipt Feed direction Black Mark on reverse sideWidth 49, 52, 55, 58 ±0.5 Note Media width 25.0 − 55.0 Note Appearance Front ViewStatus Indicator Red/Orange/Green Power ButtonInterior Operation PanelInstalling the Printer Loading the BatteryPicture Installing the Media Guide Installing the Printer Installing the Media Guide for Outside Wound Paper Loading the Media Batch issue Strip issue Securing the Printer to Your Waist Connecting the Serial Interface Cable GH20 model only Connecting the Serial Interface Cable Issuing the Media ESS-ID IrDA Communication Sample Issuing the Media CARE/HANDLING of the Media General Maintenance CleaningElement Covers Removing Jammed MediaTroubleshooting Cause Corrective action Turn on the power Interface cable One minute after power Other problems Cause Corrective action Wireless LAN Release catches are not Page EO1-33038C