Toshiba B-SP2D owner manual Issuing the Media

8. ISSUING THE MEDIA EO1-33038

8. ISSUING THE MEDIA

8. ISSUING THE MEDIA

NOTES:

1.Radio communication between a handy terminal and the B-SP2D printer is guaranteed when the handy terminal is in the operator’s hand and the printer is secured at the waist. Proper radio communication may not be obtained when used on other conditions and in areas subject to noise and radio interference.

2.Be sure to disconnect the RS-232C interface cable from the printer before performing IrDA communication.

3.IrDA is available on the condition indicated below. The following performance is obtained under fluorescent light (max. 1000 lx).

Care must be taken to prevent the direct sunlight or intensive light from coming into the IrDA interface window. Failure to do this may cause a communication failure.

Handy

Terminal

Handy

Terminal

Printer

max. 10 cm

max. 10 cm

Printer

4.In the case of Bluetooth communication, make sure that there is nothing to block the radio between the printer and the PC or handy terminal. Failure to do this may cause a communication failure.

8- 1