10. GENERAL MAINTENANCE |
10.1 CLEANING
4.Clean the print head element with a print head cleaner, cotton swab, or soft cloth slightly moistened with ethyl alcohol.
NOTE: Please purchase the print head cleaner (P/No. 24089500013) from your authorised TOSHIBA TEC service representative.
Soft Cloth |
Cutter |
Print Head |
Element |
5.Wipe the cutter, platen, and strip roller with a soft cloth moistened with ethyl alcohol. Remove dust or foreign substances from the internal parts of the printer, if any.
6.Remove paper particles or stains from the feed gap sensor, black mark/ feed gap sensor, and the strip/batch sensor with a soft cloth.
Strip Roller | Feed Gap Sensor | Strip/Batch |
| Sensor | |
| Black Mark/Feed | |
| Gap Sensor |
|
Platen
10- 2