Toshiba B-SP2D owner manual CARE/HANDLING of the Media

Page 38

9. CARE/HANDLING OF THE MEDIA

EO1-33038

9. CARE/HANDLING OF THE MEDIA

9. CARE/HANDLING OF THE MEDIA

CAUTION!

Be sure to read carefully and understand the Supply Manual. Use only media that meets specified requirements. Use of non-specified media may shorten the head life and result in problems with bar code readability or print quality. All media should be handled with care to avoid any damage to the media or printer. Read the following guideline carefully.

•Do not store the media for longer than the manufactures recommended shelf life.

•Store media rolls on the flat end, do not store them on the curved sides as this might flatten that side causing erratic media advance and poor print quality.

•Store the media in plastic bags and always reseal after opening. Unprotected media can get dirty and the extra abrasion from the dust and dirt particles will shorten the print head life.

•Store the media in a cool, dry place. Avoid areas where they would be exposed to direct sunlight, high temperature, high humidity, dust or gas.

•The thermal paper used for direct thermal printing must not have specifications which exceed Ca++ 800 ppm, Na+ 800 ppm, K+ 800 ppm and Cl– 600 ppm.

•Some ink used on pre-printed labels may contain components which shorten the print head's product life. Do not use labels pre-printed with

ink which contains hard substances such as carbonic calcium (CaCO3) and kaolin (Al2O3, 2SiO2, 2H2O).

For further information please contact your local distributor or your media manufacturer.

9- 1

Page 37 Page 39
Image 38
Page 37 Page 39
Contents SP2D Series CE Compliance for EU only VorsichtTrade Mark For all countries and areasFor USA Precaution in use TEC-BTM SpecificationSafety Summary Safety PrecautionsSafety Precautions Safety Precautions Precautions Safety Precautions Table of Contents Connecting the Serial Interface Cable Introduction P 2 D G H 2 0 -Q M AccessoriesApplicable Model Specifications PrinterBluetooth Interface Serial Interface RS-232CWireless LAN Interface Battery Media Label Tag/Receipt Feed direction Black Mark on reverse sideWidth 49, 52, 55, 58 ±0.5 Note Media width 25.0 − 55.0 Note Appearance Front ViewInterior Status Indicator Red/Orange/GreenPower Button Operation PanelInstalling the Printer Loading the BatteryPicture Installing the Media Guide Installing the Printer Installing the Media Guide for Outside Wound Paper Loading the Media Batch issue Strip issue Securing the Printer to Your Waist Connecting the Serial Interface Cable GH20 model only Connecting the Serial Interface Cable Issuing the Media ESS-ID IrDA Communication Sample Issuing the Media CARE/HANDLING of the Media General Maintenance CleaningElement Covers Removing Jammed MediaTroubleshooting Cause Corrective action Turn on the power Interface cable One minute after power Other problems Cause Corrective action Wireless LAN Release catches are not Page EO1-33038C
Top Page Image Contents