Safety Precautions |
•Be aware of the following precautions when using batteries. Otherwise they could heat up, burst or burn.
■Do not throw the battery into fire or heat it with a microwave or oven, etc.
■Do not load the battery with the electrodes reversed.
■Do not connect the electrodes with metal objects like wire. Do not carry or store the battery along with metal objects such as necklaces, hairpins, etc.
■Do not stick a needle into, hammer, step on, or drop the battery.
■Do not solder the battery.
■Do not leave the battery where the temperature is more than 60° centigrade, such as inside a car or in direct sunlight.
This indicates that there is the risk of personal injury
CAUTION or damage to objects if the machines are improperly handled contrary to this indication.
•Keep away from flame or other sources of heat. Failure to do this may cause fire or machine failure.
•Do not drop or shock the machine as this may cause machine failure.
•During lightning, turn off and keep away from the machine because of danger of electric shock and machine failure.
•Avoid locations subject to rapid change in temperature as this causes condensation, causing electric shock or machine failure.
•Do not damage the print head, platen or strip roller with a sharp object. Doing so may cause machine failure.
•Do not touch or contact the print head element with a metal object. Doing so may cause machine failure.
•Use the specified media only. Failure to do this may cause machine failure.
•Be sure to turn off the machine before replacing the battery, or machine failure may occur.
- vi -