Toshiba B-SP2D Interior, Operation Panel, Feed Button, Status Indicator Red/Orange/Green

Page 22

3. APPEARANCE

EO1-33038

3.2 INTERIOR

3.2 INTERIOR

Strip/Batch Sensor

Feed Gap Sensor

Strip Roller

Print Head

Media Holder

Media Guide

Platen

Black Mark/Feed Gap Sensor

Strip Bar

3.3 OPERATION PANEL

FEED Button

When this button is pressed, the printer issues the same label as the one issued last. The function of this button differs depending on the print mode.

Status Indicator (Red/Orange/Green)

The status indicator indicates the printer status; for example, lights when the power is turned on or blinks when an error has occurred. For details, refer to Section 11, Troubleshooting.

Power Button

A push power switch

To turn on the power, press this switch once. To turn off the power, press and hold this switch for about 2 seconds. The power will automatically turn off when the specified idle time* (selectable from 1, 5, 30, and 120 minutes) has passed. To turn on the power again, press this button. The time can be selected on the PC.

* Period of time when no operation is performed or no data is sent from the PC.

3- 2

Image 22

Contents SP2D Series CE Compliance for EU only VorsichtTrade Mark For all countries and areasFor USA Precaution in use TEC-BTM SpecificationSafety Summary Safety PrecautionsSafety Precautions Safety Precautions Precautions Safety Precautions Table of Contents Connecting the Serial Interface Cable Introduction Applicable Model AccessoriesP 2 D G H 2 0 -Q M Specifications PrinterBluetooth Interface Serial Interface RS-232CWireless LAN Interface Battery Media Label Tag/Receipt Feed direction Black Mark on reverse sideWidth 49, 52, 55, 58 ±0.5 Note Media width 25.0 − 55.0 Note Appearance Front ViewInterior Status Indicator Red/Orange/GreenPower Button Operation PanelInstalling the Printer Loading the BatteryPicture Installing the Media Guide Installing the Printer Installing the Media Guide for Outside Wound Paper Loading the Media Batch issue Strip issue Securing the Printer to Your Waist Connecting the Serial Interface Cable GH20 model only Connecting the Serial Interface Cable Issuing the Media ESS-ID IrDA Communication Sample Issuing the Media CARE/HANDLING of the Media General Maintenance CleaningElement Covers Removing Jammed MediaTroubleshooting Cause Corrective action Turn on the power Interface cable One minute after power Other problems Cause Corrective action Wireless LAN Release catches are not Page EO1-33038C